Solved BSOD at 2 random times.

[ICIT2LOL]

Good stuff mate I should have pointed that out better in my pic - I have better ones but not access to them right now

PS My mistake again I didn't send a pic so here it is

 

[ICIT2LOL]

Oh by the by the N is the version that is put out which doesn't include the Windows Media Player etc I was just curious as to why it was the version and I didn't know about Dreamspark

 

[Laith]

Remember when you run MemTest86+ if you get a single failing adress then the RAM needs to be replaced.

 

[vlassis]

Memtest Complete (9 passes)

Hello,

I just completed the memtest with no errors at all.



Any other ideas?

I believe I checked everything..

 

[Laith]

Not MemTest86, MemTest86+. You must run that.

 

[ICIT2LOL]

Ok mate my mistake I should have given you a link too Memtest86+ - Advanced Memory Diagnostic Tool which is the one I use.

 

[Arc]

Not MemTest86, MemTest86+. You must run that.

Memtest86 is a crap inferior program having a deceptively similar name. You must use memtest86+ to arrive at a fair decision.

 

[ICIT2LOL]

I'll hop off the bus here as it seems to be under control.

 

[vlassis]

Memtest PLUS

Hello, I did run memtest + but the symbol is always blinking so the camera did not get it. Here is another pic.

Thank you

 

[vlassis]

Any ideas?

Do you have any ideas of what more I can check??

Or what could be the problem?

Thank you!

 

[Laith]

@Arc i meant that he must run MemTest86+ not MemTest86

Run it for 8 passes.

 

[Arc]

That is why I ditto you there.

 

[Laith]

@Arc Well yea it was kinda screwed up but oh well, thanks for correcting me

 

[vlassis]

BSOD again

I had a BSOD again. I am uploading the DM log collector results.

If you have the slightest idea of what the problem could be please help.

Thank you

 

[Arc]

It is display failure, apparently in normal system activities.

BugCheck 1000007E, {ffffffffc0000005, fffff8800f1a8dbb, fffff88005bb3228, fffff88005bb2a80}

[COLOR=Red]Probably caused by : atikmdag.sys[/COLOR] ( atikmdag+c7dbb )

Followup: MachineOwner
---------

The possible causes of this failure is .....

• A failing driver
• A failing GPU
• An overclocked system
• An overheating system.
• Failures from the part of the power supply

We noticed that the issue is occurring with multiple version of the display driver, including 14.4 WHQL which is a very stable one. So it is not a driver issue, apparently.

As the furmark stress test passed, we cannot say it a failing graphics card.

So it is something deeper issue at the hardware level, as I think. That is why I requested ICIT2LOL to guide you, he knows the hardware in depth.

 

[ICIT2LOL]

Could I add too Arc it could be also a failing board slot?

 

[Arc]

Yes, that possibility is also there. A failing PCIe slot may also cause this issue.

 

[vlassis]

PCIe slot

Is there a way to test the PCIe slot?

It's the olny x16 so I cannot put the GPU in another one to see if the problem is solved.

Thank you!

 

[ICIT2LOL]

Well my only suggestion is to find another (?spare that you know is ok) card and try it.

PS I have just looked the specs of that board and it has two PCi slots GIGABYTE H87-D3H (BIOS version F8) GIGABYTE - Motherboard - Socket 1150 - GA-H87-D3H (rev. 1.x) or do you mean one slot is already been taken up by something else?

Either way remove the other device and put the card in it's slot and vice versa again either way one is not going to work if it is the slot(s)

 

[GokAy]

You can use a x8 PCIe slot too, even a 4x one. However, OP said he changed the motherboard 3 times with the same model.

Sorry I haven't read the whole thread, apologies if this has been discussed: BIOS update and a CMOS reset is what I would say.