BSOD Brand New System ntoskrnl.exe+72a40

texasex1998

New member
Local time
6:16 PM
Messages
5
So I had an HTPC setup, it runs MCEBUDDY to remove the commercials and then sync to my tablet in the middle of the night. The old system would randomly power itself off and give this error code when i turned it back on. Well I thought maybe the memory was failing so i replaced that, it still did it so I finally broker down and got this brand new system and ironically I am getting the exact same symptoms. This has to be due to a piece of software but I cannot figure out which one. Can someone please take a look at the dump files and let me know what else to try. Thank you so much in advance.
 
Last edited:

My Computer My Computer

At a glance

Win 7 Home Premium 64 Bit
Computer Manufacturer/Model Number
Gateway sx2800
OS
Win 7 Home Premium 64 Bit
Your dumps are blaming ftdibus.sys which seems to be a usb to serial adapter Driver Reference Table - ftdibus.sys

Try finding an alternate driver or if you are not using it disable it.

Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 9F, {3, fffffa8006a8dbd0, fffff80001ce83d8, fffffa80057be240}
*** WARNING: Unable to verify timestamp for ftdibus.sys
*** ERROR: Module load completed but symbols could not be loaded for ftdibus.sys
Probably caused by : [COLOR=red][B]ftdibus.sys[/B][/COLOR]
Followup: MachineOwner
---------
 

My Computer My Computer

At a glance

NT4Cyrix 2338 MegVoodoo
OS
NT4
CPU
Cyrix 233
Motherboard
Jetway
Memory
8 Meg
Graphics Card(s)
Voodoo
Sound Card
SB16
Monitor(s) Displays
14" CRT
Screen Resolution
800x600
Hard Drives
40meg
Keyboard
Yes
Mouse
Yes
Internet Speed
56k
thank you so much, that is the driver for my USB-UIRT device for changing channels for a STB in MCE. I will look around for an updated driver but I sincerely appreciate your help and your quick response.
 

My Computer My Computer

At a glance

Win 7 Home Premium 64 Bit
Computer Manufacturer/Model Number
Gateway sx2800
OS
Win 7 Home Premium 64 Bit
So I am still having the problem, bought a new usbuirt and changed USB ports but I cannot find an updated driver for this. I am at a loss unless anyone else knows of a better driver than the one ne from John Rhees site
 

My Computer My Computer

At a glance

Win 7 Home Premium 64 Bit
Computer Manufacturer/Model Number
Gateway sx2800
OS
Win 7 Home Premium 64 Bit
Back
Top