BSOD coming out of sleep or standby mode or just by setting down

[ppurv326]

So i have a new computer only bought a few months ago and ive gotten the BSOD several times coming out of standby mode or even if i just set it down any harder than a feather falling. Sometimes it happens sometimes its just fine, i have no idea what the problem is i just knw BSOD is bad... attached are all my crash reports please help this is only annoying as long as it isnt a serious threat to my files.

 

[koolkat77]

Welcome

Please upload your msinfo32.nfo file. To get this:

• Click on the Start rb:
• Type msinfo32 into the Search programs and files box
• When it opens, go to File, Save
• Save as msinfo32.nfo and save in a place you will remember
• Let it finish the process of gathering and saving the system info
• Right click the .nfo file, click send to compressed (zipped) folder
• Upload the .zip file here.

From one dump file I can say that your Synaptic Touch Pad Driver is causing BSoDs.
The other dumps are not that helpful. So please upload your msinfo file and look for possible driver update on the Synaptic Touch Pad Driver.

BugCheck D1, {fffffa7fd3d35bbc, 7, 0, fffff88003041a3b}

Unable to load image \SystemRoot\system32\DRIVERS\SynTP.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for SynTP.sys
*** ERROR: Module load completed but symbols could not be loaded for SynTP.sys
Probably caused by : SynTP.sys ( SynTP+3a3b )

Followup: MachineOwner
---------

0: kd> lmvm SynTP
start             end                 module name
fffff880`0303e000 fffff880`031a6000   SynTP    T (no symbols)           
    Loaded symbol image file: SynTP.sys
    Image path: \SystemRoot\system32\DRIVERS\SynTP.sys
    Image name: SynTP.sys
    Timestamp:        Sat Jul 16 03:44:41 2011 (4E20B4C9)
    CheckSum:         0016C462
    ImageSize:        00168000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

Drivers | Synaptics | Driver Reference Table

STOP 0x0000007F: UNEXPECTED_KERNEL_MODE_TRAP:
Usual causes:  Memory corruption, Hardware (memory in particular), 
Overclocking failure, Installing a faulty or mismatched hardware 
(especially memory) or a failure after installing it, 3rd party firewall, 
Device drivers, SCSI/network/BIOS updates needed, Improperly seated cards,
Incompatible storage devices, Overclocking, Virus scanner, Backup tool, 
Bad motherboard, Missing Service Pack
BugCheck 7F, {8, 80050033, 406f8, fffff800032cebdc}
Probably caused by : ntkrnlmp.exe ( nt!KiDoubleFaultAbort+b2 )
------------------
STOP 0x000000FC: ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY 
Usual causes:  Device driver
BugCheck FC, {fffff8800a6faae0, 800000008fc8c963, fffff8800a6fa800, 2}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+4534c )
------------------
STOP 0x00000050: PAGE_FAULT_IN_NONPAGED_AREA  
Usual causes:  Defective hardware (particularly memory - but not just RAM), 
Faulty system service, Antivirus,  Device driver, NTFS corruption, BIOS
BugCheck 50, {fffff6fc51ffc510, 0, fffff800032a507d, 2}
Probably caused by : memory_corruption ( nt!MiMakeProtoAddressValid+4d )

 

[ppurv326]

Here is my msinfo32 file

 

[ppurv326]

PS there was a touch pad update which i am dowloading currently

 

[koolkat77]

Okay, no problematic software.

You may want to update to the latest drivers for your onboard VGA,

Driver	c:\windows\system32\drivers\igdkmd64.sys (8.15.10.2462, 11.72 MB (12,288,480 bytes), 7/27/2011 10:22 AM)

You'll get it from here:

• Intel Download Center

Additional suggestions:
Run the System File Checker that scans the integrity of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible:

• http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

Run Disk Check on your hard disk for file system errors and bad sectors on it:

• http://www.sevenforums.com/tutorials/433-disk-check.html

Keep us posted