BSOD during gaming PLEASE HELP!

[Delvi01]

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 116
BCP1: FFFFFA800FB32010
BCP2: FFFFF880064E1E60
BCP3: FFFFFFFFC000009A
BCP4: 0000000000000004
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

This happens after about 5-10 min on any graphic intensive game. I've run memory tests, run CPU tests, switched out the motherboard, switched out my graphics card, changed my hard drive, reformatted about 4 times, made sure all drivers are up to date, windows is up to date, checked bios for wattage, made sure i was using the correct PSU wattage my PC needed (Wattage calculator) I CANNOT for the life of me figure out this stupid BSOD error 116... and it only happens on high end games.

Ive even gone into my settings and changed everything to performance... which did nothing. This has been driving me NUTS, anyone got any ideas?

 

[ICIT2LOL]

Delvi mate use these and post back


http://www.sevenforums.com/tutorials/174459-dump-files-configure-windows-create-bsod.html

&

http://www.sevenforums.com/bsod-help-support/96879-blue-screen-death-bsod-posting-instructions.html

 

[Delvi01]

Thank you, here's the folder

 

[ICIT2LOL]

Ok Delvi the last dump had an issue that is the NVidia - graphical problem and if you haven't recently update the driver please.

Now I am not familiar with the EVGA stuff and their site is a tad ambiguous but I think this is the drivers you need EVGA Download Center

FAULTING_IP: 
nvlddmkm+833128
fffff880`072b1128 48ff2511ddebff  jmp     qword ptr [nvlddmkm+0x6f0e40 (fffff880`0716ee40)]
DEFAULT_BUCKET_ID:  [COLOR=red]GRAPHICS_DRIVER_TDR_FAULT[/COLOR]
CUSTOMER_CRASH_COUNT:  1
BUGCHECK_STR:  0x116
CURRENT_IRQL:  0
ANALYSIS_VERSION: 6.3.9600.17298 (debuggers(dbg).141024-1500) amd64fre
STACK_TEXT:  
fffff880`08698a48 fffff880`0552b134 : 00000000`00000116 fffffa80`0fdb5460 fffff880`072b1128 ffffffff`c000009a : nt!KeBugCheckEx
fffff880`08698a50 fffff880`054fe867 : fffff880`072b1128 fffffa80`0da0d000 00000000`00000000 ffffffff`c000009a : dxgkrnl!TdrBugcheckOnTimeout+0xec
fffff880`08698a90 fffff880`0552af43 : fffffa80`ffffd846 00000000`00000080 fffffa80`0fdb5460 00000000`00000010 : dxgkrnl!DXGADAPTER::Reset+0x2a3
fffff880`08698b40 fffff880`0543803d : fffffa80`0b0a1360 00000000`00000080 00000000`00000000 fffffa80`0da0c410 : dxgkrnl!TdrResetFromTimeout+0x23
fffff880`08698bc0 fffff800`0311d8e2 : 00000000`02077ba6 fffffa80`0b143b50 fffffa80`08554040 fffffa80`0b143b50 : dxgmms1!VidSchiWorkerThread+0x101
fffff880`08698c00 fffff800`02e75f46 : fffff880`0393b180 fffffa80`0b143b50 fffff880`039461c0 00000000`00000000 : nt!PspSystemThreadStartup+0x5a
fffff880`08698c40 00000000`00000000 : fffff880`08699000 fffff880`08693000 fffff880`08697320 00000000`00000000 : nt!KxStartSystemThread+0x16

STACK_COMMAND:  .bugcheck ; kb
FOLLOWUP_IP: 
nvlddmkm+833128
fffff880`072b1128 48ff2511ddebff  jmp     qword ptr [nvlddmkm+0x6f0e40 (fffff880`0716ee40)]
SYMBOL_NAME:  nvlddmkm+833128
FOLLOWUP_NAME:  MachineOwner
MODULE_NAME: nvlddmkm
IMAGE_NAME:  nvlddmkm.sys
DEBUG_FLR_IMAGE_TIMESTAMP:  5581075a
FAILURE_BUCKET_ID:  [COLOR=red]X64_0x116_IMAGE_nvlddmkm.sys[/COLOR]
BUCKET_ID:  X64_0x116_IMAGE_nvlddmkm.sys
ANALYSIS_SOURCE:  KM
FAILURE_ID_HASH_STRING:  km:x64_0x116_image_nvlddmkm.sys
FAILURE_ID_HASH:  {1f9e0448-3238-5868-3678-c8e526bb1edc}
Followup: MachineOwner

We need to try this first and see what happens.

By the way are you overclocking??

 

[Delvi01]

Updated, same thing, fails.

I think my system came auto overclocked

 

[ICIT2LOL]

Ok mate lets test that puppy out just to see what happens please give this a go
FurMark

 

[Delvi01]

Okay GPU never got about 81%, power would fluctuate between 98-101%, average frame rate was 134, Nothing happened though... which is frustrating since I'm still getting crashes...

 

[Pauly]

Okay GPU never got about 81%, power would fluctuate between 98-101%, average frame rate was 134, Nothing happened though... which is frustrating since I'm still getting crashes...

Nothing happened ? did furmark render a picture ? did it display properly ?
You say power % what about temperatures ?

 

[Delvi01]

When I mean nothing happened I mean, there were no crashes, the picture that was rendered was fine, never changed but even though the test past with no issues... I'm still getting BSOD during video games play

Temp was between 80-81, never got above 81%, Fan was only running at about 55%

 

[Pauly]

What version driver are you using, try uninstalling all NVidia software/drivers run http://www.sevenforums.com/tutorials/83814-drivers-clean-left-over-files-after-uninstalling.html then reinstall WHQL NVidia driver if you are currently using latest then try going back one version but keep away from any betas

 

[Delvi01]

@Pauly, Currently updated to the latest driver but I've clean installed, installed previous drivers and that hasn't worked. When I mean clean install I mean I actually went through the registry and my entire computer to make sure nothing was there, I've also reformatted 4 times with clean installs and previous versions.

Before I was getting BSOD, my kernel mode drivers would fail and restart, then it stopped restarting and just started crashing

 

[ICIT2LOL]

Hmm bit late but I would have said something along the lines that Pauly had. Now trying to think a little left field here and as I am inclined to go through and eliminate things starting with what I think of as the basics I would like to see this down for starters. Now it might seem little odd testing the PSU but it is always my first port of call because it is very often overlooked as a potential cause of crashes BSOD's. That is because without it functioning properly nothing is going to work no matter what you try and work out - or throw at the machine LOL!!
Seriously it is one thing that has to be eliminated from the list of stuff to be looked at as the drivers and tests that have already been done have not achieved much if anything and that in itself smacks of a hardware issue.

Using HW Info

PART A:

You can test the volts onthe PSU with HW Info HWiNFO,HWiNFO32/64 - Download <download the right bit version and close the right hand window select Sensorsand scroll down to the power section where you will see what the volts aredoing see my pic. In my pic the section (Nuvoton)with VBATT is a dead give away you are in the section for the rail voltages.There are other section titles and one that pops up often is ITE

Now the voltage on thedifferent rails have to be within 5% =+/- of what is required or the machinewill not work properly if at all.

See this for the railvoltage info

http://www.tomshardware.com/reviews/power-supply-specifications-atx-reference,3061.html (Section 2.)

The original right handwindow shows the machine running and is handy for that but for looking at thecomponents in some detail close it and use the main left hand side panel

FOR OTHER COMPONENTS

PART B:

Open each small squarewith + in it on the section the components are in and then click on theindividual component/s (it willhighlight in blue) - in the right hand side will appear all sorts of detailsincluding brands speeds and other essential info that particular device. Seepic for example.
Let us know what you find