BSOD error 0x00000124 after pc standby boot

[McCool]

Hello, i'm getting BSOD's after my pc wakes after standby. It first started a week ago and before the 1st bsod occured the only hardware changes i made were adding an external 4tb hd (though it connects via wireless router usb) and an extra 8GB of Ram. I'm almost positive all my drivers are updated and although i'm overclocking my temps run below 70 all day and I was't getting bsod's before . Any help is much appreciated. Below are my specs and bsod file.

Thank you,
Michael

intel core i5 4690k ([email protected])
Gigabyte Z97X-Gaming 7
AMD Radeon R9 290
G Skill 16GB RAM@1600

 

[Laith]

Hello and welcome to Sevenforums!rb:
The cause of your problem is the hardware. Run MemTest86+ for 8 passes and Seatools for DOS and Windows.
http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html
http://www.sevenforums.com/tutorials/313457-seatools-dos-windows-how-use.html

 

[McCool]

Hello, Thank you for the reply. I've ran memtest prior to my post and it passed on 6 passes. I just ran Seatools in Windows and it passed. However when I tried to run it in Dos Seatools stated it could not find any of my hard drives. Is it possible a missing directory could be to blame. I did run a directory clean up before this problem started.

 

[Laith]

Hm, try running sfc /scannow on an elevated command prompt.

1. Click the start button
2. Search for "cmd" without the quotes
3. Right-click it and press run as adminstrator.
Now type in sfc /scannow and let it finish.