BSOD Error PAGE_FAULT_IN_NONPAGED_AREA BCCode: 50

[Ar6entino]

Thanks I will check that out
I marked that 232.11GB as active and put the HD back into the original machine and now I get a new blue screen when trying to go into recovery mode...

BAD_SYSTEM_CONFIG_INFO
STOP: 0x00000074

and when I try to boot normally I get
BOOTMGR is missing

 

[egghead3xl]

Same problem

I had the exact same issue yesterday and again today. I custom built my system 3 weeks ago. I did not have any issues installing OS and all system files. No issues what so ever until yesterday. I had the exact same issue that was mentioned by OP(blue screen, Pagefault in non paged area). I took out all memory, graphics cards, and one by one reinstalled each. I was able to eventually system restore to 5 days ago. I then reinstalled the remainder of the components. I restarted multiple times yesterday. I thought I remedied the problem. I shut down last night and this morning upon restart I had the same problem again. I think it might be the windows update. I pushed all the updates yesterday after i restored it.

I am at work for the next few hours but as soon as I return I will continue to troubleshoot. I will try the deletion of FNT file and post results.

 

[Kaktussoft]

I had the exact same issue yesterday and again today. I custom built my system 3 weeks ago. I did not have any issues installing OS and all system files. No issues what so ever until yesterday. I had the exact same issue that was mentioned by OP(blue screen, Pagefault in non paged area). I took out all memory, graphics cards, and one by one reinstalled each. I was able to eventually system restore to 5 days ago. I then reinstalled the remainder of the components. I restarted multiple times yesterday. I thought I remedied the problem. I shut down last night and this morning upon restart I had the same problem again. I think it might be the windows update. I pushed all the updates yesterday after i restored it.

I am at work for the next few hours but as soon as I return I will continue to troubleshoot. I will try the deletion of FNT file and post results.

Blue Screen (Stop 0x50) after applying update KB2982791 to - Microsoft Community

But it is about Stop error 0x50 in the Win32k.sys driver after you install a font update
But original poster has stop 0x50 in ntfs.sys instead of win32k.sys. Since you can do a system restore ... it looks like a healthy volume and indeed a bad patch. So NOT same problem!

 

[egghead3xl]

I had the exact same issue yesterday and again today. I custom built my system 3 weeks ago. I did not have any issues installing OS and all system files. No issues what so ever until yesterday. I had the exact same issue that was mentioned by OP(blue screen, Pagefault in non paged area). I took out all memory, graphics cards, and one by one reinstalled each. I was able to eventually system restore to 5 days ago. I then reinstalled the remainder of the components. I restarted multiple times yesterday. I thought I remedied the problem. I shut down last night and this morning upon restart I had the same problem again. I think it might be the windows update. I pushed all the updates yesterday after i restored it.

I am at work for the next few hours but as soon as I return I will continue to troubleshoot. I will try the deletion of FNT file and post results.

Blue Screen (Stop 0x50) after applying update KB2982791 to - Microsoft Community

But it is about Stop error 0x50 in the Win32k.sys driver after you install a font update
But original poster has stop 0x50 in ntfs.sys instead of win32k.sys. Since you can do a system restore ... it looks like a healthy volume and indeed a bad patch. So NOT same problem!

Yikes, I did not look close enough. I apologize for the confusion. I did have problems with the system restore at first. I had to take the computer down to barebones to get it to load the system restore before BSOD. I'll verify mine is the win32k.sys, and not ntfs.sys when I return to my computer.

Thanks!

 

[Ar6entino]

TestDisk scanned it but nothing came back with anything that I could do

 

[Ar6entino]

So I was able to boot into a ubuntu OS i had in a cd and i am able to browse the contents of the bad drive now.
I went to Windows\System32\FNTCACHE.DAT and renamed that file and rebooted and Now I can get to the windows recovery options with my repair cd
Will update later on how far I get

 

[essenbe]

Do you have the hard drive back in the computer it is supposed to be in?

 

[Ar6entino]

Yes I do now going thru recovery tools and hope for the best

 

[essenbe]

Will it boot into Windows in normal mode?

 

[Ar6entino]

No thats why I am running thru the repairs now

 

[Ar6entino]

I get a message that it cant be rapaired and if i want to send info to mucrosoft bla bla.
The machine no longer blue screens but it just restarts itself over and over now.

 

[essenbe]

When you ran check disk, you said there was nothing you could do anything about. What did it sat exactly? Also were you able to find any restore points? Did you try the restore the computer to a previous point in time and see if you have one that is before this problem started.

 

[Ar6entino]

I tried the restore but no difference.
I didnt really understand what the check disk was telling me really.

 

[essenbe]

Try the Seatools again. Run the short and the long test. The long test will take quite a while, but will test the disk for errors, not the file system..

 

[Ar6entino]

Yeah waiting for some other scans abd doing that next

 

[essenbe]

have you also tried safe mode with networking?

 

[Ar6entino]

Not yet
Scanning now with seatools. Passed short scan, doing the long one now

 

[essenbe]

Good, let me know.

 

[Ar6entino]

No error on seatools scans.
No luck on safe mode w networking

 

[Ar6entino]

Good news!
I am able to boot into Windows!
There was a setting in the BIOS I had changed in the middle of the troubleshooting and changing it back made the OS boot now.


The Sata operation I had to set back to AHCI