Solved BSOD Graphics Driver 0x00000119

[craig3558]

Hi All,

Im new to this forum so not sure if this is in the right topic.

I have an Acer Aspire AX3810 running windows 7 home premium 64bit. I have 7gb DDR3 Memory and an ATI Radeon HD5450 graphics card.

A few weeks ago before upgrading windows and my memory I began getting BSOD errors about the graphics driver on boot up. This would occur every now and then and then boot up normally with no problems at all during running the system.

This problem seemed to occur out of the blue. I noticed that there was a new driver released so tried updating it, but still had the same problem. I upgraded windows and added 4gb more memory. This still has not assisted. the problem is now nearly every boot up, with the system going to BSOD, then re-booting itself then straight into windows and everything works fine, graphics card shows as working, driver shows as working and up to date.

Does anyone know why my driver could be crashing on and only on boot up. Its getting rather annoying now.

Please find attached my dump file. Also as stated above this problem started before my windows and memory upgrade. The graphics card was running fine for 2 years, it only happened since the auto driver update.

Kind Regards

Craig

 

[Northernsoul55]

You do realise you have already started another thread on this same issue

http://www.sevenforums.com/graphic-cards/278581-ati-radeon-hd5450-driver-crashing-bsod-boot.html

 

[craig3558]

yes though it was in the wrong section and I didnt include the dmp report or add my system details to my profile.

 

[Northernsoul55]

No worries

If you post the full report and specs in the other thread and mark this as solved,
we should be able to help further.

Cheers

Dave