BSOD - In need of some assistance please.

[Sienna Love]

Hopefully we could get it fixed .

Ya Hopefully, we'll see what happens when this file finishes. Till then, think I'mma go to sleep and report back after it Finishes and I put it on a flash to be booted. Anything else you might wanna add before I head off?

 

[VistaKing]

If I am not here when you wake up run this command . Take a look at this tutorial

http://www.sevenforums.com/tutorials/139810-sfc-scannow-run-command-prompt-boot.html

sfc /SCANNOW /OFFBOOTDIR=c:\ /OFFWINDIR=d:\Windows

To check the drive letter of Windows run this command

bcdedit | find "osdevice"

   Note

the | pipe symbol is the key above Enter . Hold shift down and press the key with \ on it

Press the enter key after you inputted the command . It will tell you the drive letter of Windows . It might say its os device partition=D:

 

[Sienna Love]

If I am not here when you wake up run this command . Take a look at this tutorial

http://www.sevenforums.com/tutorials/139810-sfc-scannow-run-command-prompt-boot.html

sfc /SCANNOW /OFFBOOTDIR=c:\ /OFFWINDIR=d:\Windows

To check the drive letter of Windows run this command

bcdedit | find "osdevice"

   Note

the | pipe symbol is the key above Enter . Hold shift down and press the key with \ on it

Press the enter key after you inputted the command . It will tell you the drive letter of Windows . It might say its os device partition=D:

I think we might be getting somewhere, I finished putting the iso onto the flash and tried to boot it up. It said Window is loading files, showed Windows is starting before a BSOD came up saying.

MEMORY_MANAGEMENT

*** STOP: 0x0000001A (0x0000000000000005100, 0xFFFF6FC40076A28, 0x0000001E)

Next 2 attempts I received the following:

BAD_POOL_HEADER

***Stop 0x19

Along with Paged_in_nonpaged_area or something. Mostly the Bad_Pool_Header.

 

[Sienna Love]

**Note** I'm hoping I can fix this today :/ because I'm going to be moving soon and dunno if I will have access to the net after today or tommorrow.

 

[VistaKing]

MEMORY_MANAGEMENT

*** STOP: 0x0000001A (0x0000000000000005100, 0xFFFF6FC40076A28, 0x0000001E)

Next 2 attempts I received the following:

BAD_POOL_HEADER

***Stop 0x19

Along with Paged_in_nonpaged_area or something. Mostly the Bad_Pool_Header.

From the statement you said the BSOD is . I recommend doing a memory test using Memtest86+. I believe I sent you a link to get that in the previous posts. If you have more then 1 memory stick test each memory stick on each slot if you get any errors during the test.

:ERRORS: Will be on the bottom highlighted in Red

If you have a Dual Channel Memory Kit and you have bad stick(s) call the manufacture and open up an RMA for the memory . Even if one memory stick is bad on the Dual Channel kits you replace both sticks.

 

[Sienna Love]

MEMORY_MANAGEMENT

*** STOP: 0x0000001A (0x0000000000000005100, 0xFFFF6FC40076A28, 0x0000001E)

Next 2 attempts I received the following:

BAD_POOL_HEADER

***Stop 0x19

Along with Paged_in_nonpaged_area or something. Mostly the Bad_Pool_Header.

From the statement you said the BSOD is . I recommend doing a memory test using Memtest86+. I believe I sent you a link to get that in the previous posts. If you have more then 1 memory stick test each memory stick on each slot if you get any errors during the test.

:ERRORS: Will be on the bottom highlighted in Red

If you have a Dual Channel Memory Kit and you have bad stick(s) call the manufacture and open up an RMA for the memory . Even if one memory stick is bad on the Dual Channel kits you replace both sticks.

Hmm, well I tried to use the usb for the windows you sent me. I stopped getting Memory_Management as I haven't seen it in awhile.

The most common I'm getting now is Bad_Pool_Header

 

[VistaKing]

Have you ran the memtest in the link below ?

:ar: http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html

 

[Sienna Love]

Have you ran the memtest in the link below ?

:ar: http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html

Gonna do that now, just got back from work.

 

[VistaKing]

Pay attention to Part 3 on the link .

 

[Sienna Love]

Pay attention to Part 3 on the link .

Okay, soon as I booted the PC up it started by itself. It's not even on 1 pass yet and it has like 60k errors.

 

[VistaKing]

Sienna Love

If its not on any passes and you're getting 60k errors . Stop the test and test every RAM on every slot one at a time . If its a Dual Channel memory kit call the manufacture to open an RMA for the memory .

 

[Sienna Love]

Whenever I try to remove all but 1 Ram and test it my PC won't even boot up. The fans and stuff are one, but the screen stays black. It only boots up with all 3 in there.

 

[VistaKing]

What is the model of your motherboard . It sounds to me you have a Triple Channel memory kit .

 

[Sienna Love]

What is the model of your motherboard . It sounds to me you have a Triple Channel memory kit .

It's an ASUS P5B Plus Series.

:s I'm starting to think nothing is gonna save this computer. I'm just getting alot of STOP: 0x7E (0xFFFFFFFC500000) or w/e BSOD

 

[VistaKing]

Your motherboard supports Dual Channel memory. But you should be able to get it to boot with 1 memory stick on the Black slot on the motherboard . Second slot from the top.

 

[Sienna Love]

Your motherboard supports Dual Channel memory. But you should be able to get it to boot with 1 memory stick on the Black slot on the motherboard . Second slot from the top.

I'll take a look at this then

 

[VistaKing]

Did you buy the memory in a kit or did you buy them separately ?