BSOD - iTunes or iOlo, no idea (dmp file attch.)

jlawass

New member
Local time
6:21 PM
Messages
3
The problem started at first every time I started using iTunes. But I also started using iOlo for all of my security needs. Just when I thought I had it figured out, it now crashes more frequently and while using other programs. It reads APC_index_mismatch.

Here is the pop-up and the dmp file is attached.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 1
BCP1: 83096E82
BCP2: 00000000
BCP3: 0000FFFF
BCP4: 00000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

All of my software is updated. I have run a complete scan for viruses and other malware and nothing wrong was found. I have avoided using file sharing programs and iTunes for the time being. I also recently switched over to Windows 7 from XP. Lenovo gave me a disk for all the driver updates but certain things still don't work like the camera and Veriface. The computer was purchased in 2009. Y530. 2.0 Ghz, 3 GB RAM, 32-bit OS.
 

My Computer My Computer

At a glance

Windows 7
Computer Manufacturer/Model Number
Lenovo
OS
Windows 7
The problem started at first every time I started using iTunes. But I also started using iOlo for all of my security needs. Just when I thought I had it figured out, it now crashes more frequently and while using other programs. It reads APC_index_mismatch.

Here is the pop-up and the dmp file is attached.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 1
BCP1: 83096E82
BCP2: 00000000
BCP3: 0000FFFF
BCP4: 00000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

All of my software is updated. I have run a complete scan for viruses and other malware and nothing wrong as found. I have avoided using file sharing programs and iTunes for the time being.

Just curious. where did you get win 7 from? It is a different version than the RTM from microsoft.

Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\K\Desktop\030710-21122-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*d:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is: 
Unable to load image \SystemRoot\system32\ntkrnlpa.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Windows 7 Kernel Version 7600 MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16481.x86fre.win7_gdr.091207-1941
Machine Name:
Kernel base = 0x82e1c000 PsLoadedModuleList = 0x82f64810
Debug session time: Sun Mar  7 10:07:49.895 2010 (GMT-5)
System Uptime: 0 days 1:39:29.877
Unable to load image \SystemRoot\system32\ntkrnlpa.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Loading Kernel Symbols
...............................................................
................................................................
...........................................
Loading User Symbols
Loading unloaded module list
..........
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1, {83066e82, 0, ffff, 0}

***** Kernel symbols are WRONG. Please fix symbols to do analysis.

*************************************************************************
***                                                                   ***
***                                                                   ***
***    Your debugger is not using the correct symbols                 ***
***                                                                   ***
***    In order for this command to work properly, your symbol path   ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Your debugger is not using the correct symbols                 ***
***                                                                   ***
***    In order for this command to work properly, your symbol path   ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!KPRCB                                      ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Your debugger is not using the correct symbols                 ***
***                                                                   ***
***    In order for this command to work properly, your symbol path   ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Your debugger is not using the correct symbols                 ***
***                                                                   ***
***    In order for this command to work properly, your symbol path   ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!KPRCB                                      ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Your debugger is not using the correct symbols                 ***
***                                                                   ***
***    In order for this command to work properly, your symbol path   ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Your debugger is not using the correct symbols                 ***
***                                                                   ***
***    In order for this command to work properly, your symbol path   ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
 

My Computer My Computer

At a glance

Win 8 Release candidate 8400[email protected]4 gigsNvidia 9600M
Computer Manufacturer/Model Number
HP Pavillion dv-7 1005 Tx
OS
Win 8 Release candidate 8400
CPU
[email protected]
Memory
4 gigs
Graphics Card(s)
Nvidia 9600M
Sound Card
HD built-in
Monitor(s) Displays
17" Wxga
Screen Resolution
1440x900
Cooling
none
Internet Speed
45Mb down 5Mb up
This version came from Lenovo. The laptop came with XP last year and they upgraded it with the disc. As I said, the drivers were confusing and some programs still don't work.
 

My Computer My Computer

At a glance

Windows 7
Computer Manufacturer/Model Number
Lenovo
OS
Windows 7
So, does this mean I'm screwed?
 

My Computer My Computer

At a glance

Windows 7
Computer Manufacturer/Model Number
Lenovo
OS
Windows 7
Back
Top