Solved BSOD multiple errors 116, 117

[essenbe]

OK, as I understand it, you have tried several drivers for the card, all with a clean install of the drivers. If it is still crashing it would have to be the card, the Motherboard slot(s) or the PSU. You ran driver verifier and there seemed to be no conflicting drivers, so those are all that is left, It would be helpful if your friend could try your card in his computer to see if he gets the same results as you. Am I correct in all of that?

 

[woodhouse]

Well you are almost correct. I have tried only 1 driver with the clean install. All rest were just updates.

The driver i installed is in this post: http://www.sevenforums.com/bsod-help-support/364302-bsod-my-nvidia-driver.html
And you were right... it was not you it was Boozad recommending that driver. Sorry for that.

Maybe i need to mention another problem i had since i bought the computer. I connected my monitor to PC using the miniHDMI port on the graphics card. Sometimes it just wouldn't start and gave me 6 beeps. Based on that alienware sent me 3 new graphics card,new processor, new motherboard and then a brand new PC. Problem was still not solved... if i use the miniHDMI port i will still sometimes get 6 beeps. I am using now the normal port (VGA). I dont know if this is related to my problem or not.

I attached 2 new BSODs. Thanks !

 

[essenbe]

That, to me, only would mean the graphics card isn't working like it should. Have you tried HDMI or DVI? DVI always works best for me.

Try the clean install with another driver using the same method. http://www.sevenforums.com/tutorials/327414-nvidia-drivers-avoid-problems.html. I always use that method and never install anything except the Graphics Driver and PhysX. Try another driver and see if there is any difference.

 

[woodhouse]

I said VGA sorry... i meant DVI. I can't try normal HDMI port because GTX 690 doesnt have one except the miniHDMI. I would need an DVI - HDMI adapter. Alright i will try other driver(s). Thanks.

P.S: I think the files i attached upper are different because those are from BSOD today when i was not playing.

 

[essenbe]

They say the same thing the others did. Video TDR Failure.

 

[woodhouse]

I have found the problem... it was RAM issue... i removed 8GB and now its working fine. Thank you for your help.

 

[essenbe]

I'm glad you have it working right and hope it continues for you.

 

[Layback Bear]

Could you post the site for the exact motherboard your system is using?
Your motherboard might have ram limitations.

Also the site for the ram your system uses?

Look at essenbe and my system specs. Detailed information is very helpful.

Computer type PC/Desktop
System Manufacturer/Model Number Home made Desktop
OS Windows 7 Pro. 64/SP-1
CPU Intel i7-4820-E @ 4.625/vcore 1.3V bios
Motherboard ASUS X79 Sabertooth
Memory G.SKILL Trident X Series-2400/16 Gb/I don't recommend G.Skil
Graphics Card Asus GTX-770/OC
Monitor(s) Displays Asus 27" LED LCD/VE278Q
Screen Resolution 1920-1080 or 1280-720 HDMI

Update your System Spec
Keyboard Das 4 Professional
Mouse M/S 5000 wireless
PSU Corsair AX-860i Platinum
Case Phanteks Enthoo Primo/4 case 140 fans
Cooling XSPC 360/240 Dual pump water cooling/2 radiators 10 fans p/p
Hard Drives INTEL SSD 530-250 Gb Sata 3.0/ Samsung 500 GB SSD external for backups.
Internet Speed 3.0 mb
Antivirus Microsoft Security Essentials/ Malwarebytes Premium
Browser I.E. 11 default/Firefox/ ISP Windstream
Other Info LG BluRay Burner/ Sound system KLipsch-THX/ Asus Router RTN-12 StarTech 5 1/4 ssd/hard drive sata hot swap bay.

Computer type PC/Desktop
System Manufacturer/Model Number Home Built Rig1/ Rig 2
OS Windows Ultimate SP1/Windows 7 Enterprise X64
CPU Intel i7-3770K/i7-5930K
Motherboard Asus Maximus V Extreme Z77/ Asus X99 Deluxe
Memory 16GB G.Skill DDR3-2400 /16 GB Ripjaws 4 DDR4-2800
Graphics Card EVGA 780 Classified/EVGA GTX 980 Classified
Sound Card On Board
Monitor(s) Displays Asus 27" LCD VG278HE 144Hz
Screen Resolution 1920X1080

Keyboard Logitech G510s
Mouse Logitech G500
PSU CORSAIR AX1200i/EVGA 1050W
Case Phanteks Enthoo Primo/ Corsair 750D
Cooling Custom Water Cooling- 2X360mm Rads and D5 Pump/ Corsair H105
Hard Drives Samsung 120GB 850 Pro,2 X Samsung 840 Pro SSD 256 GB, 2X120 GB Samsung EVO, 500 GB Samsung EVO, Samsung HD103SJ 1TB . External HD- Black X dock esata 2TB Seagate, Rosewill USB 3.0 dock 2TB Seagate, Black X Duo esata 2X Seagate 2TB drives.
Internet Speed carrier pigeon speed
Antivirus ESET/MBAM Pro
Browser ie11 / Chrome/
Other Info 2nd Rig i7-3770K Asus Sabertooth Z77, 16 GB G Skill, HX750, Samsung 840 Pro 256 GB, Various hard drives, EVGA GTX 780 Classified Switch 810 case, windows 7 Pro X64 (WHS in VM) -------- 3rd rig (used as HTPC),Windows 7 Ultimate SP1 X64, i7-2600K, Asus Maximus V Gene, 256GB Samsung 830, 3X2TB drives, HD 6950, 8 GB DDR3-2133, Corsair 600T. Laptop- Samsung RF711 Win 7 HP / Dell Inspiron Win 8

 

[woodhouse]

Well the site from where i bought my entire desktop PC is this one: Alienware Gaming PC - Gaming At Its Best - Alienware DE
The motherboard is alienware made (if i understood correctly) and about the RAM i can tell you what it is written on the RAM tag: SK hynix 4GB 1Rx8 PC3.

 

[Layback Bear]

I just curious because I can't find a Alenware motherboard for a 2011 intel cpu.
If I could I could look at the specs.

By chance did your system come with a motherboard manual?
It's a must to have.

What I'm trying to do is find a way for you to see as much of your system as possible. You will find out the more you know about your system the is a good thing.

Try this tutorial by Kari and see what it shows.

http://www.sevenforums.com/tutorials/311593-speccy-publish-snapshot-your-system-specs.html

 

[woodhouse]

Here is the link: http://speccy.piriform.com/results/m4omzZAewdX5xvEU0VOcJFz

 

[Layback Bear]

Thank you for the Speccy report.
Lots of information for you and us to look at.

***Check you voltages in your bios because Speccy is indicating low volts in the +5 and high volts in the +12.
It could be false readings by Speccy.

Motherboard
Manufacturer:
Alienware
Model:
07JNH0 (CPU 1)
Version:
00
Chipset Vendor:
Intel
Chipset Model:
Sandy Bridge-E
Chipset Revision:
07
Southbridge Vendor:
Intel
Southbridge Model:
X79
Southbridge Revision:
06
System Temperature:
42 °C
BIOS
Brand:
Alienware
Version:
A11
Date:
11/26/2013

Voltage
+3.3V:
3.312 V
CPU CORE:
1.376 V
VIN2:
2.304 V
VIN3:
1.294 V
+5V:
3.784 V
+12V:
15.752 V
VIN6:
3.344 V
VSB3V:
3.296 V
CMOS BATTERY:
3.328 V

 

[Layback Bear]

This is why I don't understand why you had to remove memory to get your system to work.


alienware 07jnh0 (a00) mainboard specs

4 x 240-pin DDR3 DIMM slots Supports (Quad-Channel) DDR3 1866/1600/1333 MHz non-ECC, un-buffered memory – (Max 32GB)

Be sure and check your power supply voltages in the Bios.

Also, what brand is your power supply? It's not in your specs.

 

[woodhouse]

Well i just removed 2/4 rams (maybe 1 is broken or something). The power supply is also alienware made i think. Can you please be more specific about the voltage ? I dont understand what i need to check...

 

[essenbe]

Look in BIOS for your Voltage. You need the values of your +12V, +5V and +3.3V. Speccy may have read them wrong, but it has your +12V at 15.72V, +5V at 3.7V. ATX standards are +/- 5% which means your +12V should be no more than 12.6V and your +5V no less than 4.75V. Your voltages according to Speccy are way out of specs. The BIOS is the most accurate reading of voltages.

 

[woodhouse]

Ok so i used another program CPUID HWMonitor to read voltages and they were same as speecy (12-15 and 5-3). I also uploaded some images from bios (this is all i could find).

If this is true then it's a big problem ...

 

[woodhouse]

Anything else i could do ?

 

[Layback Bear]

You could show the voltages as suggested.

In your bios look in the Power section.