BSOD ntoskrnl.exe

[neildeny]

hi, im having random BSOD's.. i use bluescreenview to check my dmp files.. and the common issue (cause its always saying something else in BSOD) is ntoskrnl.exe.. i uploaded all of my dmp files here..

i run memtest + i sent my ram's to warranty and they are ok they say.. i never have any problems when i was using xp professional..

 

[Tews]

Ill have a look at em, but for now .. The dmp(s) point to ntkrpamp.exe or ntoskrnl.exe as the probable cause. We know this is not the case, as these are core OS files, and will definitely not cause a BSOD. They are just the default files the debuggers blame when they can't see a better cause. To pin the problem down, enable driver verifier..

- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

 

[Tews]

I sopke too soon... DISABLE Driver Verifer for the time being.. You have too many issues here, and until they are cleared up, driver verifer is just going to crash your system for the same issues.. Lets address them one by one...

usb.sys ... This is your USB driver ... go to Asuss' home page and make sure that you have the latest version...

nvlddmkm.sys ... Driver for your nVidia Geforce 6600 card .. Update to the latest version...

I8042prt.sys This is a system function driver found in Microsoft Windows 2000 and later versions for PS/2-style keyboard and mouse devices. Check for updates for your keyboard/mouse

tcpip.sys.... Update your network adapter to the latest version...

kl1.sys ... Kaspersly Antivirus.... A known cause for BSOD crashes in some systems.. Uninstall Kaspersky and install Microsoft Security Essentials...

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {ffffffff, 2, 1, fffff88003eceec0}

Probably caused by : USBPORT.SYS ( USBPORT!USBPORT_Core_iCompleteDoneTransfer+2fc )

Followup: MachineOwner
---------
.....
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {200, 2, 1, fffff88004b8b203}

Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : hardware ( dxgmms1!VidSchiProcessCompletedQueuePacketInternal+2db )

Followup: MachineOwner
---------


.......
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {fffff50006593a38, 2, 1, fffff880048082bd}

Probably caused by : i8042prt.sys ( i8042prt!I8042MouseIsrDpc+261 )

Followup: MachineOwner
---------

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1, {7710ff8a, 0, ffff0000, fffff88002618c60}

Probably caused by : ntkrnlmp.exe ( nt!KiSystemServiceExit+245 )

Followup: MachineOwner
---------


*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck F7, {fffff88002215bc8, f88001966020, ffff077ffe699fdf, 0}

Probably caused by : tcpip.sys ( tcpip!_report_gsfailure+26 )

Followup: MachineOwner
---------


*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1E, {ffffffffc0000005, fffff880040f5a30, 1, 0}

Unable to load image \SystemRoot\system32\DRIVERS\kl1.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for kl1.sys
*** ERROR: Module load completed but symbols could not be loaded for kl1.sys
Probably caused by : kl1.sys ( kl1+7aa30 )

Followup: MachineOwner
---------

The following drivers are out of date.. They may or may not be contributing to your problem, but should be updated ..

ffff880`02cac000 fffff880`02cb4000   ASACPI   ASACPI.sys   Wed May 13 21:25:17 2009 (4A0B72FD) ..This file is used by Asus utilites and various others. Yours is old and needs to be updated. That should resolve this issue..
fffff880`02c7a000 fffff880`02cac000   Rt64win7 Rt64win7.sys Thu Feb 26 04:04:13 2009 (49A65B0D) ... This driver is a component of the Realtek network driver available here: [URL="http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=7&PFid=10&Level=3&Conn=2"]Realtek[/URL]

Once you have replaced/updated all of these drivers, see if you continue to get BSOD crashes...

 

[neildeny]

and i did what u said up above.. and i couldnt start my comp. because of crashes.. and i started in "safe mode".. i restart to verifier in the safe mode, and i choose
1-standart settings
2 -all the drivers in this comp..

and i restart my comp.. and now my cpu is working 100%.. i cant even move the mouse properly.. im hardly typing this message.. how can i turn back to my settings?

 

[Tews]

Disable driver verifier until you have updated the drivers that I pointed out...


How to Enable or Disable Driver Verifier in Windows 7

 

[neildeny]

thanks for the link.. i disabled the verifier and restarted again.. now my cpu turned back to normal.. when i was trying to start my comp (with verifier on) it crashed many times but there is only one .dmp file.. im also uploading that.. and now im gonna update all the drivers u mention..

 

[Tews]

Let us know how it goes...

 

[neildeny]

hi again,

1 - i updated my chipset for usb and other devices.. "Intel_ChipsetInf_V9111014_XPVistaWin7" this is the latest version from asus webpage

2 - the driver i use for my nVidia is the latest driver already.. they dont have any newer

3 - I couldnt find any driver for my inca keyboard.. i check the website of inca there is not driver for it..

4 - and i didnt understand what is "tcpip.sys" (network adapter).. im using an old version of hayes ethernet adsl modem.. but it didnt caused any problem so far..

5 - and also yesterday i updated my audio driver from "http://www.via.com.tw/"

and i didnt have any BSOD since the last time.. now my computer is on and im waiting my next BSOD.. cause i usually have more than 8 or 9 times per day.. (and im crossing my fingers to "not to have" another BSOD)

 

[Tews]

Fingers crossed!! Thanks for letting us know..

 

[neildeny]

and i got new BSOD.. i attached the .dmp file.. and i dont have any idea about to how to fix this..

 

[cluberti]

Here's a quick question - what is the SATA controller on that motherboard configured for, IDE or AHCI? This fail would indicate something wrong with the I/O request to the SATA bus.

 

[neildeny]

Bios setted up as IDE for my sata HDD's. I also tried to change it to AHCI but it didnt help at all.

 

[neildeny]

and i got BSOD again.. some details about last crash ;

DRIVER_IRQL_NOT_LESS_OR_EQUAL, ataport.sys ntoskrnl.exe

and also I attached the .dmp file

 

[cluberti]

It's going to be the same stack - if you keep getting it, something is potentially wrong with the drivers you have installed for the chipset (or the hardware itself). Have you installed the latest drivers from Intel for the ICH10R?

 

[neildeny]

hi again,

the problem still continues.. and i updated my chipset from asus webpage.. but i couldnt find anything like drivers in intel's page.. there were only 2 downloads for my cpu in intel's page.. and they are not driver as i see..

and i attached my last .dmp files here.. and im totally confused..

 

[ttran]

Please enable Driver verifier:
http://www.sevenforums.com/tutorials/101379-driver-verifier-enable-disable.html

Run system file checker:

Open an elevated command prompt and enter sfc /scannow.

BUGCHECK SUMMARY:

BugCheck D1, {fffffa804363c4cd, 2, 1, fffff88001670c83}

Probably caused by : tcpip.sys ( tcpip!ProcessAleForTcpFastPath+e3 )

Followup: MachineOwner
---------
BugCheck 3D, {fffff88006027d50, 0, 0, fffff88004baf5c3}

Probably caused by : dxgmms1.sys ( dxgmms1!memmove+1b3 )

Followup: MachineOwner
---------
BugCheck D1, {fffffa80426d0298, 2, 0, fffff88000c25c39}

Probably caused by : ataport.SYS ( ataport!IdeStartIoCallBack+91 )

Followup: MachineOwner
---------

 

[neildeny]

I tried to use verifier once and after that my comp. never opened till i disable the verifier into safe mode.. and it was really hard to get that point to disable verifier..

and now im using HD Tune Pro to check my harddisk if there is an error init.. after that i will do what u say about sfc/scannow.. ill keep informing here about news..

 

[neildeny]

and HD Tune finished without any error.. after that i started cmd and i typed sfc/scannow and it is just finished without any errors.. so i guess there is no problem with my harddisk.. what else can i do to fix my BSOD problems..

 

[ttran]

Please check for BIOS update!

 

[neildeny]

but my bios is already updated.. version 0801 from ;

http://www.asus.com/product.aspx?P_ID=URA00A6u0GrUqHiH

win 7 x64, latest version.. and there is no other newer version..