BSOD on after logging in, error 0x0a

[unwritten19]

Built this pc for a friend and while it doesnt happen everytime fairly often it gets a BSOD after logging into a profile. I have updated all drivers and switched anti-virus programs but it still happens.

uploaded latest dump files.

 

[koolkat77]

Welcome to SevenForums.

Perform a clean boot:

• http://www.sevenforums.com/tutorial...ation-conflicts-performing-clean-startup.html

*Does the computer BSOD in Safe Mode?

Uninstall Avira antivirus:

• Avira AntiVir Removal Tool - Download

Make scans with the following:

-Kaspersky TDSSKiller

• Anti-rootkit utility TDSSKiller

-ESET online scanner

• Free Online Virus Scanner | ESET

MSE is recommended from a strict BSOD perspective, compatibility & stability compared to other antiviruses/internet security software:-

1. Microsoft Security Essentials - Free Antivirus for Windows
2. Malwarebytes - Free
3. http://www.sevenforums.com/system-security/206705-good-free-system-security-combination.html
​

:warn: Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.

Run a full scan with both (separately) once downloaded, installed and updated.

 

[unwritten19]

I removed avira but it happened again, this time it happened randomly while using the PC. It has not happened the few times I've started it in safe mode but it also does not happen every time i use the PC.

I have uploaded the latest dump files to see if you see the cause but will run the clean boot for the next week or 2 till i hopefully narrow it down. The tricky thing is its not everytime i use the PC that i blue screen so even running clean boots means i need to remove services for a long period of use.

 

[koolkat77]

From your files it looks like avira is still there.
Have you installed MSE and Malwarebytes?
Made full scans with both? ESET & TDSS?

---

Reinstall this program & its drivers:
cFosSpeed - The Internet Accelerator
(Latest if available)

---

Update these drivers:

l[FONT="Consolas"]mvm netr28x
start             end                 module name
fffff880`044d1000 fffff880`04587000   netr28x  T (no symbols)           
    Loaded symbol image file: netr28x.sys
    Image path: \SystemRoot\system32\DRIVERS\netr28x.sys
    Image name: netr28x.sys
    Timestamp:        Fri Jun 19 13:56:06 2009 (4A3B4496)
    CheckSum:         000B67F9
    ImageSize:        000B6000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4[/FONT]

Ralink RT2860 series Wireless LAN Card (you may have a different manufacturer)

---

Perform a System File Check:

• Click on the rb:
• Type CMD on Search
• Left click and Run as Administrator
• Type SFC /scannow

Full tutorial here:

• http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

---

Disk Check on your hard disk for file system errors and bad sectors on it:

• http://www.sevenforums.com/tutorials/433-disk-check.html

---

If the above does not bring stability, test your RAM.

Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.

• http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html

The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and continue with the next step.

1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes.

*Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
​

If this stick passes the test then go to step #3.

2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot.

*If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
​

*If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
​

3. Test the next stick of RAM (stick #2) in the next motherboard slot.

*If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
​

*If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
​

4. If you find a stick that passes the test, test it in all the other motherboard slots.

If Part 2 testing shows errors, and all tests in Part 3 show errors, you will need to test the RAM sticks in another computer and/or test other RAM in your computer to identify the problem.

In this way, you can identify whether it is a bad stick of RAM, a bad motherboard, or incompatibility between the sticks.

   Information

Errors are sometimes found after 8 passes.

   Tip

Do this test overnight, before going to bed.

Post your results.

 

[unwritten19]

Alright sorry for the late reply but it looks like it was a faulty RAM stick. Had 4 2 GB sticks and once I narrowed down and removed the faulty stick the computer has not blue screened for a about 1 1/2 weeks now.

Thanks for the help! Hope i don't need to come back =P

 

[koolkat77]

When you're confident your problem is solved please mark the thread as solved.

   Tip

• If your problem is solved please use the
  
  Mark this thread as solved link at the top of your thread or down on the left corner
  

 

[koolkat77]

Any update?