BSOD playing battlefield 3/battlefield 4 beta

[amazingnessn]

I've made threads asking for help in the past and went back over them before posting here, but I'm kind of stuck again.

I ran furmark without my gpu overheating/crashing, and I ran prime95 again without overheating/crashing. I haven't done any overclocking, and I ran 9 passes of memtest overnight/through morning classes. I just got finished uninstalling amd catalyst 13.9 driver package and installing 13.11 beta driver package this afternoon. Just ran sfc /scannow 10 minutes ago with nothing found.

Any help you could give me will be greatly appreciated.

 

[x BlueRobot]

[COLOR="Red"]BugCheck 50[/COLOR], {fffff8a0144f0be8, 1, fffff88010bd061b, 0}

Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_GLOBAL::CloseOneAllocation+17f )

2: kd> [COLOR="SeaGreen"]lmvm atikmdag[/COLOR]

start             end                 module name
fffff880`0fe41000 fffff880`10ac1000   atikmdag T (no symbols)           
    Loaded symbol image file: atikmdag.sys
    Image path: atikmdag.sys
    Image name: atikmdag.sys
    Timestamp:        [COLOR="Red"]Thu Sep 26 21:43:16 2013[/COLOR] (52449C64)
    CheckSum:         00C38880
    ImageSize:        00C80000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

I would suggest rolling back to the latest WHQL drivers, since the Beta drivers haven't been fully tested for bugs and stability, and therefore are more crash prone.

WHQL
Release Date: September 18th 2013
Version: 13.9
In Device Manager: 13.152

 

[x BlueRobot]

Do you still have the previous threads?

 

[amazingnessn]

Sorry for the long delay, yes I do still have the old threads.
http://www.sevenforums.com/bsod-help-support/237913-bsod-playing-battlefield-3-page_fault_in_nonpaged_area-dxgmms1-sys.html
http://www.sevenforums.com/bsod-help-support/292923-bsods-not-producing-dumps.html

The 13.9 certified driver was causing much more frequent BSODs, and I mean at least every other day sometimes several in the same day. For some reason (as you will find in the old thread) the 13.9 driver package screws with my page file, making me have to reset it every time I install that particular driver set.

I'm currently installing the newest beta drivers in hopes that it will help somewhat.

 

[x BlueRobot]

That may be a good idea in these circumstances, although, I have seen another thread where the Beta drivers seemed to be causing problems. I'm not completely sure, if this is the problem though, since they may be using the Windows 8.1 Preview edition.