BSOD playing Grand Theft Auto 5 entire game shuts down computer

[Cilcor]

When playing this game it uses a large bit of GPU but it still runs fluently. I've only had problems when playing gta 5 and world of warcraft, I've left the bsod files here as well.Any help is much appreciated.

 

[Cilcor]

My error code is 0x000000f4

 

[essenbe]

Hello Cilcor, I will try to help you with your problem. You have 4 dump files from today. All 4 were basically the same.

CRITICAL_OBJECT_TERMINATION (f4)
A process or thread crucial to system operation has unexpectedly exited or been
terminated.
Several processes and threads are necessary for the operation of the
system; when they are terminated (for any reason), the system can no
longer function.
Arguments:
Arg1: 0000000000000003, Process
Arg2: fffffa80092d6b30, Terminating object
Arg3: fffffa80092d6e10, Process image file name
Arg4: fffff80003389940, Explanatory message (ascii)
Debugging Details:
------------------
----- ETW minidump data unavailable-----
PROCESS_OBJECT: fffffa80092d6b30
IMAGE_NAME:  csrss.exe
DEBUG_FLR_IMAGE_TIMESTAMP:  0
MODULE_NAME: csrss
FAULTING_MODULE: 0000000000000000 
PROCESS_NAME:  csrss.exe
EXCEPTION_CODE: (NTSTATUS) 0xc0000006 - The instruction at 0x%p referenced memory at 0x%p. [COLOR=red]The required data was not placed into memory because of an I/O error status of 0x%x.[/COLOR]
BUGCHECK_STR: [COLOR=red]0xF4_IOERR[/COLOR]

KERNEL_DATA_INPAGE_ERROR (7a)
The requested page of kernel data could not be read in.  Typically caused by
a bad block in the paging file or disk controller error. Also see
KERNEL_STACK_INPAGE_ERROR.
If the error status is[COLOR=red] 0xC000000E[/COLOR], 0xC000009C, 0xC000009D or 0xC0000185,
it means the disk subsystem has experienced a failure.
If the error status is 0xC000009A, then it means the request failed because
a filesystem failed to make forward progress.
Arguments:
Arg1: fffff6fc40019c08, lock type that was held (value 1,2,3, or PTE address)
Arg2: ffffffffc000000e, error status (normally i/o status code)
Arg3: 000000006f940be0, current process (virtual address for lock type 3, or PTE)
Arg4: fffff88003381000, virtual address that could not be in-paged (or PTE contents if arg1 is a PTE address)
Debugging Details:
------------------
 
ERROR_CODE: (NTSTATUS) [COLOR=red]0xc000000e [/COLOR]- A device which does not exist was specified.
DISK_HARDWARE_ERROR: [COLOR=red]There was error with disk hardware[/COLOR]

KERNEL_DATA_INPAGE_ERROR (7a)
The requested page of kernel data could not be read in.  Typically caused by
a bad block in the paging file or disk controller error. Also see
KERNEL_STACK_INPAGE_ERROR.
If the error status is [COLOR=red]0xC000000E[/COLOR], 0xC000009C, 0xC000009D or 0xC0000185,
it means the [COLOR=red]disk subsystem[/COLOR] has experienced a failure.
If the error status is 0xC000009A, then it means the request failed because
a filesystem failed to make forward progress.
Arguments:
Arg1: fffff6fc4000c8f8, lock type that was held (value 1,2,3, or PTE address)
Arg2: ffffffffc000000e, error status (normally i/o status code)
Arg3: 00000001fe331860, current process (virtual address for lock type 3, or PTE)
Arg4: fffff8800191f3f0, virtual address that could not be in-paged (or PTE contents if arg1 is a PTE address)
Debugging Details:
------------------
 
ERROR_CODE: (NTSTATUS) [COLOR=red]0xc000000e [/COLOR]- A device which does not exist was specified.

The first thing I would suggest is to back up all of your data to an external source. You are only listing an SSD as a hard drive. If you have any other Mechanical Drives or external drives plugged in, please run Seatools for DOS both the short and the long test. http://www.sevenforums.com/tutorials/313457-seatools-dos-windows-how-use.html#Part3

If you SSD has a toolbox, use it to see if the drive is having problems and make certain you have the latest Firmware on it. I would also check both ends of all cables going to your Hard drives. Please let me know the results.

 

[Cilcor]

I ran the sea tools and this program called HD tune as well on both of the drives i have but it didnt say anything was wrong, but it seems when i run any game from my ssd drive they all crash so i moved my game over to the hard drive and have not had any problems but now instead of the blue screen error I had. now I am getting the 0x0000007a

 

[essenbe]

Please upload the BSOD Posting Instructions http://www.sevenforums.com/bsod-help-support/96879-blue-screen-death-bsod-posting-instructions.html. Upload the files here, this will tell you how. http://www.sevenforums.com/tutorials/9733-screenshots-files-upload-post-seven-forums.html

What SSD do you have and are you getting that error, gaming or just using the computer? I assume your OS is on the SSD, is that correct? Give me as much info as you can on what's happening now.