BSOD playing league of legends and watching most videos online

[cjcarroll]

Okay I'll look. And yes that's what I meant. I have the DVD

 

[cjcarroll]

Yes my Samsung is in the right port. The port it is in only supports data drives along with my DVD/cd drive. My hdd is in the port for the hard disk drives. So that's in the right place.

My computer doesn't freeze when its in safe mode

 

[essenbe]

If you don't mind reinstalling, I would like you to run something for me. There is always a chance you may have to, but we take every precaution so that does not happen. So far it has never happened to me. Just to be safe, back up any files you may have that you don't want to lose. Create a restore point, the link to do that is below. Do that before you do anything else. If your computer does not freeze in Safe Mode, It is most likely a driver. If you BSOD, don't be too concerned, this test is meant to make your computer BSOD and hopefully catch the offending driver. There are no restrictions. Do anything you want with the computer. Use it as much as possible and run it for 24 hours. If it seems a little slow and sluggish, that is normal. In setting the test up, sort the drivers by provider. Enable all drivers not provided by Microsoft.

   Warning

Be sure to create a System Restore point before proceeding further http://www.sevenforums.com/tutorials/697-system-restore-point-create.html

Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

   Information

What is Driver Verifier:
It puts stress on the drivers, and tries to make the faulty driver crash the computer. It is designed this way, to attempt to trap the offending driver.

What you will notice:
It will tend to make the computer rather slow and sluggish because the drivers are being stressed.

   Warning

Before enabling DV, make sure you have created a system restore point before enabling Driver Verifier. make a System Restore Point manually before enabling DV.

   Tip

• If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
• If you cannot boot in Safe mode, do a System Restore to a point you made earlier.

Let us know the results, with the subsequent crash dumps, if any.

 

[cjcarroll]

Alright I'll do that tomorrow. It's not an ideal day off but if it means I don't have to get a new computer its well worth it. Thank you for the help tonight.

 

[essenbe]

No problem. I just hope it works. But, if it does not freeze in Safe Mode, it seems it must be a driver or a bad program. In Safe mode Windows only loads drivers necessary for it to run, so I would think the logical explanation is there is a driver it is not loading (non Microsoft Driver) that is causing the problem. The hardware runs anyway. So, that is what I am thinking anyway.

 

[cjcarroll]

I decided to stay up tonight. I ran a system restore 'affect programs' scan and found that a ton ofbthevprograms had to do with my mouse drivers. Should. What do you think I should do? I use a Razer Naga so there are a ton of drivers in use

 

[cjcarroll]

it actually seemed to be my mouse drivers and software that were corrupt and upon startup it would try to run and freeze my pc. It is working now. even though it did crash once after 4 hours of being active. i did another scan and it showed no integrity errors. so i am unaware of the problem. we could pursue this too the end if you are up for it!

 

[cjcarroll]

only crashes everyone few hours. and it isnt regular by any means. here is the new DM log. the windows update is still hidden and is not installed.

 

[essenbe]

Razer drivers cause many people problems.

 

[essenbe]

I ran several of the last few dumps. The were all 0X124 except for 1 which gave no reason. But each one of the 124 gave a different cause.

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa801bf59028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000fe200000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000021136, Low order 32-bits of the MCi_STATUS value.

fffff880`06946288  fffff880`0f5a0d1eUnable to load image atikmdag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
 atikmdag+0x12bd1e

Graphics driver

fffff880`034b72d8  fffff880`10798ff6Unable to load image e1c62x64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for e1c62x64.sys
*** ERROR: Module load completed but symbols could not be loaded for e1c62x64.sys
 e1c62x64+0x21ff6

Your Intel(R) 82579V Gigabit Network Connection driver

fffff880`0b7e7538  fffff880`00e45b34Unable to load image asahci64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for asahci64.sys
[COLOR=red]*** ERROR: Module load completed but symbols could not be loaded for asahci64.sys[/COLOR]
 asahci64+0x1b34

That is your Asmedia 106x SATA Host Controller Driver


Please run Driver verifier as detailed in post 43

 

[cjcarroll]

I did the test. and it crashed around 10 mins into the test. in the instructions it said to disable it after the first crash so I did. What do you need now?

 

[essenbe]

http://www.sevenforums.com/bsod-help-support/96879-blue-screen-death-bsod-posting-instructions.html
Upload that here in a new post and I'll look at it in the morning.

 

[cjcarroll]

here we go

 

[essenbe]

Here is what the dump says

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa801c067028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000be200000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000021136, Low order 32-bits of the MCi_STATUS value.

fffff880`0338c578  fffff880`04221ff6Unable to load image e1c62x64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for e1c62x64.sys
[COLOR=red]*** ERROR: Module load completed but symbols could not be loaded for e1c62x64.sys[/COLOR]
 e1c62x64+0x21ff6

That is your Intel(R) 82579V Gigabit Network Connection driver which it has been all along. I checked and it is the latest driver on the Asus Web Site.

 

[Arc]

Hi Steve.

Please dont take it otherwise, I just wint to double check that the network driver is really the latest one (Version 17.2.0.0) or an earlier version (Version 16.6.0.0). As the timestamp is closer to the release date of Version 16.6.0.0.

    Image name: e1c62x64.sys
    Timestamp:        Fri Mar 16 09:27:28 2012

Hi cjcarroll. Do the following:

1. Press the "windows" key and "R" together on the keyboard. It will open the Run dialog.
2. Type devmgmt.msc there and hit enter. It will open the Device Manager window.
3. Double Click on "Network adapters". It will list down all installed network adapters.
4. Right click on Intel(R) 82579V Gigabit Network Connection (or any similar name with Intel), Select "Properties" in the context menu. A new window will appear, with the "General" tab selected.
5. Click on the Driver tab.
6. Take a screenshot and upload it here.

It will let us see the driver version installed.

 

[cjcarroll]

here we go

 

[cjcarroll]

this is a link that i found that shows all the newest drivers for my network connection driver. I'm not the expert here so please tell me if I am wrong! and I do not want to step out of bounds I'm jsut trying to help

 

[essenbe]

You're not stepping out of bounds, but I would like Arc to answer that one.

 

[cjcarroll]

alright awesome. i can't tell if his timezone is 9 at night or in the morning.

 

[Arc]

this is a link that i found that shows all the newest drivers for my network connection driver. I'm not the expert here so please tell me if I am wrong! and I do not want to step out of bounds I'm jsut trying to help

This link lists the network drivers of Intel 82579 Gigabit, whereas your network adapter is 82579V Gigabit. Intel has only Server Drivers listed for it: https://downloadcenter.intel.com/search?keyword=Intel+82579V+gigabit.

If you have a doubt, you get a driver from [URL="https://downloadcenter.intel.com/product/47549/Intel-82579-Gigabit-Ethernet-Controller"]the link that you posted. But before doing that, download and save the Intel(R) Gigabit Ethernet Driver V17.2.0.0 for Windows Version 17.2.0.0 from Motherboards | P8Z77-V | ASUS Global. If the drivers form your link does not work (as there is a confusion) uninstall that and try the V17.2.0.0.