Solved BSOD playing WoW, 3 constant errors 0x0A, 0x50, 0x1E

[Northernsoul55]

Hmmm. its your Atheros Wireless network adapter driver again, even though you have successfully
updated to:

athrx.sys    [COLOR=red]Mon Mar 11 11:04:29 2013[/COLOR]

Please Test your Wireless, Hard drive, Motherboard, and PCIe using Lenovos diagnostic utility:

:ar: http://support.lenovo.com/en_US/diagnose-and-fix/detail.page?LegacyDocID=LENV-DIAGS

Also look to update all device drivers to latest version, where possible:

:ar: http://support.lenovo.com/en_US/downloads/default.page?

Please test your wireless if none of the updates / tests fix your issue,
if you have a wireless on/off switch, then turn off the wireless.
You will have to connect an Ethernet cable to connect to the internet via the router..

If you do not have a switch, then navigate to:

Start>Computer>System Properties, and click Device Manager in the left pane.
Expand Network adapters and right click and disable your Wireless Adapter.

Now use the computer as normal with the Ethernet cable, does your issue remain?

Cheers

Dave

 

[Myrovanna]

5 new crashes within minutes of eachother

 

[Northernsoul55]

In this situation I would suggest a :ar: Repair Install

cheers

Dave

 

[Myrovanna]

I don't think I could do that because windows 7 came pre-installed with my computer and I never got a disc for it, will I still be able to do it? Orr?

 

[Northernsoul55]

What was the outcome of the tests and updating?
Did your issue persist with Wireless disabled?

A Factory reset may be the only way at this point.

cheers

Dave

 

[Myrovanna]

The tests updating and wireless thing didn't work
I'm currently trying to do repair install like you recommended but can you check out that repair install link and help me with the picture I posted on very lasr page of that thread because I keep getting an error on the compatability check. Thanks

-Christian

 

[Northernsoul55]

Brink will answer that for you hopefully, I'm not sure.

Are you not able to restore your computer using recovery options?

cheers

Dave

 

[Myrovanna]

Well my computer came pre-installed with a program called OneKeyRecovery but it restores it to back the first day I got it with all the preloaded lenovo programs and stuff and it doesn't help

 

[Northernsoul55]

While your waiting for Brink (Shawn) to reply) please do the following:


Run SFC to check the integrity of all Windows 7 system files:

• Click on Start > Type in search cmd
  Right-click cmd after results are displayed and Run as Administrator
  Type SFC /scannow at the prompt
  (Note: There is a space between SFC and /scannow)

:ar: SFC Tutorial

   Note

Select option two. If any problems are found, run the scan 3 times and immediately
reboot the computer after each scan.

cheers

Dave

 

[Myrovanna]

0 errors came back

 

[Myrovanna]

Is there anyway I can do a clean reinstall with my preinstallrd version of win7 on lenovo laptop because my computer won't even boot to the desktop now

 

[Myrovanna]

So I attempted a clean reinstall of windows 7 and now its not even letting me get through the setup of windows 7, it keeps giving me SYSTEM_SERVICE_EXCEPTION and BAD_POOL_CALLER

 

[x BlueRobot]

[COLOR="Red"]BugCheck 19[/COLOR], {[COLOR="Blue"]3[/COLOR], [COLOR="SeaGreen"]fffffa8003929820[/COLOR], 53005700000000, 6c}

Probably caused by : [COLOR="Red"]Pool_Corruption[/COLOR] ( nt!ExDeferredFreePool+a53 )

1: kd> [COLOR="SeaGreen"]!pool fffffa8003929820[/COLOR]
GetPointerFromAddress: unable to read from fffff800030b0100
Pool page fffffa8003929820 region is GetUlongFromAddress: unable to read from fffff800030b01c0
Nonpaged pool
[COLOR="Red"]*fffffa8003929000 size:  920 previous size:    0  (Allocated) *.... (Protected)[/COLOR]
		Owning component : Unknown (update pooltag.txt)

fffffa8003929920 doesn't look like a valid small pool allocation, checking to see
if the entire page is actually part of a large page allocation...

GetUlongFromAddress: unable to read from fffff8000301ea38
fffffa8003929920 is not a valid small pool allocation, checking large pool...
unable to get pool big page table - either wrong symbols or pool tagging is disabled
fffffa8003929920 is freed (or corrupt) pool
Bad previous allocation size @fffffa8003929920, last size was 92

1: kd> [COLOR="SeaGreen"]!poolval fffffa8003929820[/COLOR]
Pool page fffffa8003929820 region is [COLOR="Blue"]Nonpaged pool[/COLOR]

Validating Pool headers for pool page: fffffa8003929820

Pool page [ fffffa8003929000 ] is __inVALID.

Analyzing linked list...
[COLOR="Red"][ fffffa8003929000 --> fffffa80039292d0 (size = 0x2d0 bytes)]: Corrupt region[/COLOR]


Scanning for single bit errors...

None found

We are dealing with a corrupt pool free list, which is a linked list of free memory allocations, we can see that the block was allocated, although the corresponding pool tag is unknown. The Protected bit shows us that allocation being freed is the intentional one.

1: kd> [COLOR="SeaGreen"]k[/COLOR]
Child-SP          RetAddr           Call Site
fffff880`076aa668 fffff800`02fab4b3 nt!KeBugCheckEx
fffff880`076aa670 fffff800`03174b7f nt!ExDeferredFreePool+0xa53
fffff880`076aa760 fffff800`0317499b nt!ObpAllocateObject+0x12f
fffff880`076aa7d0 fffff800`03140f64 nt!ObCreateObject+0xdb
fffff880`076aa840 fffff800`0314d5b3 nt!SepDuplicateToken+0xf4
fffff880`076aa8e0 fffff800`0313f107 nt!SeCopyClientToken+0x5f
fffff880`076aa970 fffff800`031552b9 nt!SepCreateClientSecurity+0xb7
fffff880`076aa9a0 fffff800`03155750 nt!SeCreateClientSecurity+0x59
fffff880`076aaa00 fffff800`0315bc37 nt!AlpcpCreateClientPort+0x464
fffff880`076aaab0 fffff800`02e77e93 nt!NtAlpcConnectPort+0x14b
fffff880`076aabb0 00000000`77961a5a nt!KiSystemServiceCopyEnd+0x13
00000000`00d8dc48 00000000`00000000 0x77961a5a

The Object Manager creates a new object, and then allocates the object a allocation of non-paged pool, the object never seems to be freed, so maybe the pool page became corrupt due to hardware.

-----------------------------------------------------------

• http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html

Run Memtest86+ for least 9-10 passes, and preferably overnight as it can take a while to fully complete.

Test each RAM stick individually, if an error is found then move the same RAM stick into the next DIMM slot and test again, if errors are found for the same RAM stick in every available slot then you have a faulty RAM module. On the other hand, if no errors are found in the next slot or the other slots for the same RAM module, then you have a faulty DIMM slot.

Test each RAM stick and every motherboard DIMM slot available.

test|Slot1|Slot2
RAM1| Error | Error
RAM2|Good|Good

It is a RAM, a bad RAM.

But if you have got a result like that:

test|Slot1|Slot2
RAM1| Error |Good
RAM2| Error |Good

It is a motherboard issue. The particular slot is bad.

 

[Arc]

Another BSOD happened when viewing the forums right now, I've attached the new minidump along with the other minidumps

Your new BSODs (at least two of them) are also caused by Lenovo EE Boot Optimizer driver, as Northernsoul55 pointed out in Post #3 .

That stuff is a lenovo bloatware, and you have lots of them. I'd recommend you to http://www.sevenforums.com/tutorials/219576-clean-up-factory-bloatware.html, with a special reference to Point #13

13. Consider a Clean Reinstall - Factory OEM Windows 7 which is often better than getting a new computer considering how pre-installed bloatware can corrupt Windows 7 even if it's completely cleaned up.

If you opt for a clean reinstall which you should do here as a must, follow the link ......

:ar: Clean Reinstall - Factory OEM Windows 7

Everything that you need is supplied there. So you will not fail to do it. Have faith on yourself. Even if you fail, we are here ... ask as when needed.

And, keep yourself away from stuff like EgisTecFF after the clean install.

Have a try. Best of luck.
_________________________________________________________________________________
BSOD ANALYSIS:

fffff880`02659978  fffff880`0189d81cUnable to load image \SystemRoot\system32\DRIVERS\EgisTecFF.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for EgisTecFF.sys
*** ERROR: [COLOR=Red]Module load completed but symbols could not be loaded for EgisTecFF.sys[/COLOR]
 EgisTecFF+0x281c
----------------------------------------------------------------------------------------
BugCheck 19, {3, fffff80003057720, fffff80003057780, fffff80003057720}

*** WARNING: [COLOR=Red]Unable to verify timestamp for fbfmon.sys
*** ERROR: Module load completed but symbols could not be loaded for fbfmon.sys[/COLOR]
Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+a53 )

Followup: Pool_corruption
-----------------------------------------------------------------------------------------
BugCheck 7F, {8, 80050033, 6f8, fffff8000228ca0f}

Probably caused by : ntkrnlmp.exe ( nt!KiDoubleFaultAbort+b2 )

Followup: MachineOwner
-----------------------------------------------------------------------------------------
BugCheck 4E, {9a, 4399e, 6, 0}

[COLOR=Red]*** WARNING: Unable to verify timestamp for fbfmon.sys
*** ERROR: Module load completed but symbols could not be loaded for fbfmon.sys
Probably caused by : fbfmon.sys[/COLOR] ( fbfmon+330f )

Followup: MachineOwner
-------------------------------------------------------------------------------------------
BugCheck 19, {3, fffffa8003929820, 53005700000000, 6c}

Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+a53 )

Followup: Pool_corruption
-------------------------------------------------------------------------------------------
BugCheck 3B, {c0000005, fffff80002fba123, fffff88002659e30, 0}

Probably caused by : ntkrnlmp.exe ( nt!ExFreePoolWithTag+43 )

Followup: MachineOwner
---------

 

[Myrovanna]

I did a memtest with both chips errors came up on the first pass... tested ramstick 1 in both slots for 7 passes no errors.. test stick 2 in both slots... slot 1 went 6 passed then about 80000 errors came up and slot 2 3rd pass when I was letting it run came back with like 600000 errors lol,so this means I have bad RAM right?

 

[x BlueRobot]

It seems you have bad RAM, I would order a replacement, do the sticks still have warranty or any return policy remaining?

 

[Myrovanna]

Noo my warranty ran out last year but I went to the store and spent 55$ on new RAM I put them in so ill see how the computer runs for a couple days and report back... thank you guys so much for the help =] I couldn't have done it without u guys

 

[x BlueRobot]

Welcome, hope everything runs fine for the next few days

 

[Myrovanna]

So my computer worked completely fine... crashed again with 0x19 BAD_POOL_HEADER and now when it boots up it works for like 15 secs then freezes and loads a bunchbof red lines across the screen and stops working. =/

 

[Myrovanna]

Whenever i try to enter startup repair the screen goes black then asks me again if I wana go to startup repair.. and it keeps doing that over and over