BSOD randomly, page fault in nonpaged area, NOT beause of my RAM

[ynoo]

Hello. I know this is NOT because of my RAM. I have newish ram, and I doubt it is broken. This also happened before in the past, but when I restored my computer, It fixed.

I filled out some form where it asked for my computer specs when I logged in. I don't know if you can see that, but if not, ask, and I'll post it here.

I have also attached my SF_Diagnostic_Tool.exe logs. I will be gone for a while, but I'll be back later.

 

[koolkat77]

New RAM could be bad. Have you run Memtest?

STOP 0x00000050: PAGE_FAULT_IN_NONPAGED_AREA

Usual causes: Defective hardware (particularly memory - but not just RAM), Faulty system service, Antivirus, Device driver, NTFS corruption, BIOS

Memtest86+

Run Memtest86+ for at least 8-10 passes. It may take up to 20 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold. http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html

   Note

Pay close attention to part 3 of the tutorial in order to rule the faulty RAM stick out.

   Tip

Do this test overnight.

Virus check

Scan your system with the following:

Kaspersky TDSSKiller - How to remove malware belonging to the family Rootkit.Win32.TDSS (aka Tidserv, TDSServ, Alureon)

ESET online scanner - One-time virus scanner free with ESET online scanner

Revo Uninstaller

Problematic software:

[B]Start Menu\Programs\Auslogics	Public:Start Menu\Programs\Auslogics	Public
Start Menu\Programs\Auslogics\Disk Defrag	Public:Start Menu\Programs\Auslogics\Disk Defrag	Public
Start Menu\Programs\DAEMON Tools Pro	Public:Start Menu\Programs\DAEMON Tools Pro	Public[/B]

Download and install Revo Uninstaller free from here: Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems

Opt for "Advanced Mode" and uninstall the software (also delete the leftover registry entries).

SFC scannow

Check windows for corruption:

http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

1. Click on the Start rb:
2. Scroll to Accessories
3. Select Command Prompt > Right click and Run as Administrator
4. Type

   [B]SFC /scannow[/B]

Disk Check

Disk Check for errors on your Hard drive(s): http://www.sevenforums.com/tutorials/433-disk-check.html

Hope this helps for now.

 

[cipley]

you can't be too sure though

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffff6dcc01684a8, 0, fffff80002a6056b, 5}


Could not read faulting driver name
Probably caused by : [B][COLOR="Red"]memory_corruption[/COLOR][/B] ( nt!MiAgeWorkingSet+1d1 )

Followup: MachineOwner
---------

Agree with koolkat77, new doesn't have to be not bad

 

[koolkat77]

PS: Please post this report: Windows Genuine and Activation Issue Posting Instructions