BSOD randomly, sometimes while playing games, sometimes just idle.

[writhziden]

Did you proceed through the steps in http://www.sevenforums.com/crash-lo...op-0x116-video_tdr_error-troubleshooting.html? You have not posted the outcome of those troubleshooting steps.

 

[romanteni]

I have reset pagefile, I did sysscan with no errors, my vid cards passes numerous stress tests/great score in future mark. No over heating issue, back when I did i7 980 extreme OCing I did watercooling, but right now I'm running about a dozen silent fans in a Haf case which has amazing airflow.
My temperatures on GPU and CPU/board are amazing, that couldn't be an issue.

HD's are working perfectly as well,. Currently I'm running memtest on ram, I'm so hoping its not the ram, cuz back when I bought this corsair 1800, they were the expensive shit, and I'm pretty sure my warranty is out

 

[romanteni]

Btw writh, I did clean drivers wipe, since Nvidia came out with updated drivers couple days ago anyway, it was just good timing lol But yeah, I'm not getting a single error in the event log, and not even any BSOD... wtf? lol.

I downloaded a BSOD viewer while ago, and its not even picking up any errors... its like some kid coming in and pressing the reset button on my pc while I'm not looking (my lil nephew did that while I was watching him a few times years ago,) Pissed me off really bad when I finally found out why my pc was "crashing" every 30 minutes haha.

 

[writhziden]

Download and install CPU-Z and Upload screenshots of the CPU, Mainboard, Memory, and SPD tabs. In the SPD tab, upload an image of each slot.

Also, go into your BIOS and post all Voltages (CPU, RAM, NB, IMC, etc.) and all RAM settings (timings, frequency, etc.)

Thanks to Dave76 for help learning RAM Stability



Also, take a look at the Quote: by usasma found in post#2 of BSOD when hibernating regarding SSDs.

 

[romanteni]

My SSD's got ****ed up like 1 month after warranty ended few months ago, so I'm not running SSD's in this rig anymore I do have CPU-z so Once I'm home I'll post SSs. Also all my voltages/timings have been reset to stock. I have had 4.0+ OCing 24/7 with great temperatures and very stable many times, this system in particular was built for my office, so I never bothered OCing it. I did check timings/voltages as I never like to leave bios alone. All seem fine for the ram, but if you catch something I didn't oh man, I'd appreciate it

Would have to wait till I'm home from work.

 

[romanteni]

My ram just passed 48 hour memtest - not a single error, not a single shutdown, nothing. So RAM errors are out of question here. I'm ****ing clueless. So since my pc didn't shut down a single time while being under load from memtest, its not the power supply, its not ram, not my ram slots on mobo, it must be the Fking windows right?... :/

 

[writhziden]

It could be the RAM settings in the BIOS. If the RAM is fine, it will pass memtest, but it may not be configured correctly to work properly. That is why I asked for that information in my previous post.

 

[romanteni]

Ok, Will get that for you today. Just wanted to make sure memtest passes with no errors first. Thanks for help

 

[romanteni]

Ok, on the SPD all slots have same info (tripple channel ram, 3 sticks 2gb each.) Let me know if you need anything additional.

 

[writhziden]

Start by going into the BIOS and manually setting the first four timings to 9-9-9-24 and the command rate to 2T. If you can, manually set the RAM frequency to 666 MHz, and set DRAM Voltage to 1.5 Volts. See how the system responds.

 

[romanteni]

Ok tried turning on pc today after not using it for 2 days- here's what i got, it didn't even boot up into windows and it did the same shit again. here's a pic of events

 

[writhziden]

As a first step, clear the CMOS: How To Clear CMOS (Reset BIOS)

You will need to backup your data first since this will reset your RAID controller and will likely result in loss of data. Create a system image if possible:

http://www.sevenforums.com/tutorials/73828-imaging-free-macrium.html
http://www.sevenforums.com/tutorials/663-backup-complete-computer-create-image-backup.html?ltr=B​

If you would like to avoid the above, you could see if it is a RAM issue and try running with one stick of RAM at a time. You could also update your BIOS and see if it resolves the problem.

 

[romanteni]

K so kernell errors are hard drives? I'll try to backup date I suppose, if I can find enough space, I got over 4TB of data in raid 0

 

[writhziden]

No, the kernell error is pointing to a possible power issue or controller issue regarding your CPU. Loading setup defaults through the BIOS may fix this error.

I am not saying it is a hard disk issue. I am recommending backing up your information because you are running a RAID configuration that will likely be wiped by the CMOS reset. This is one of the many reasons I avoid RAID. Why RAID is (usually) a Terrible Idea - Puget Custom Computers

 

[romanteni]

Yeah I hate how unstable raid is, but it is so much faster... lol

 

[writhziden]

I understand. Let us know when you have a chance to reset the CMOS and see if it fixes your event viewer errors.

 

[romanteni]

Ok Will do. I'll probably need to buy couple HDD's to transfer my data and reset the raid0. Just going to suck transferring so much date! eeeh! lol Thx for help man!