BSOD ***STOP & boot loop at random times

[starocean01]

Something similar has happened before (about half a year ago) but it got fixed when I did a system repair through command promt, until these few days...the loop came back again, sometimes it would boot like normal, at times it would get stuck or it'll go into a "checking file system" screen. It first started when I was browsing the web like usual, the comp suddenly froze and popped out a blue screen, it was too quick for me to capture it tho...In the past few days its gotten the BSOD a few times ive managed to take down a couple of the STOP codes 0x0000003D and 0x0000003B, im sure Ive gotten other ones too but i only remembered these 2...

I've tried system repair & restore and command prompt but none worked...i have no idea whats wrong (hardware or software?) so im hoping someone can help me find a permanent fix if possible?
Thanks

I have attached the dumb files through jcgriff2

Im using a Windows 7 Ultimate 64 bit which my friend installed for me so i could use the 4gb ram i had. It used to be Windows 7 Home Edition 32 bit.

My system is about 3-4yrs old now and OS is about 2yrs old i think...

 

[mgorman87]

It looks like it may be your RAM, but it could be driver issues as well.

dtsoftbus01.sys Thu Jan 13 03:27:08 2011 (4D2EB75C)

Start off by removing Daemon Tools. It has caused BSOD in the past.

nvlddmkm.sys Wed Aug 03 05:08:32 2011 (4E391010

Update your video card drivers - NVIDIA DRIVERS 285.62 WHQL

Once you've updated those two drivers, enable driver verifier
http://www.sevenforums.com/tutorials/101379-driver-verifier-enable-disable.html

If you get a crash, upload a new report. If after 24-48 hours nothing happens (no crash), then disable driver verifier and move on to the hardware tests

Please run these tests and report back the results
1. Memtest86 - Run for 7-8 passes - http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html
2. Prime95 - Run all three tests for 3-4 hours each or until fail - http://www.sevenforums.com/tutorials/100352-cpu-stress-test-prime95.html
3. Hard drive scan usings SeaTools - SeaTools for Windows | Seagate - Both long and short tests


BSOD BUGCHECK SUMMARY

[font=lucida console]
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Sat Jan 21 09:30:23.245 2012 (UTC - 5:00)
System Uptime: 0 days 0:04:59.815
Probably caused by : memory_corruption ( nt!MiAgeWorkingSet+1d1 )
BUGCHECK_STR:  0xA
PROCESS_NAME:  lsm.exe
FAILURE_BUCKET_ID:  X64_0xA_nt!MiAgeWorkingSet+1d1
BiosReleaseDate = 03/27/2009
SystemManufacturer = Acer
SystemProductName = Aspire M1800
CPUID:        "Intel(R) Core(TM)2 Duo CPU     E7400  @ 2.80GHz"
MaxSpeed:     2800
CurrentSpeed: 2800
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Sat Jan 21 07:03:56.482 2012 (UTC - 5:00)
System Uptime: 0 days 0:13:39.791
Probably caused by : ntkrnlmp.exe ( nt!CcGetVirtualAddress+288 )
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
BUGCHECK_STR:  0x3B
PROCESS_NAME:  mencoder.exe
FAILURE_BUCKET_ID:  X64_0x3B_nt!CcGetVirtualAddress+288
BiosReleaseDate = 03/27/2009
SystemManufacturer = Acer
SystemProductName = Aspire M1800
CPUID:        "Intel(R) Core(TM)2 Duo CPU     E7400  @ 2.80GHz"
MaxSpeed:     2800
CurrentSpeed: 2800
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Wed Jan 18 08:18:42.089 2012 (UTC - 5:00)
System Uptime: 0 days 0:09:40.415
Probably caused by : ntkrnlmp.exe ( nt!KeQueryRuntimeProcess+49 )
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
BUGCHECK_STR:  0x3B
PROCESS_NAME:  wlcomm.exe
FAILURE_BUCKET_ID:  X64_0x3B_nt!KeQueryRuntimeProcess+49
BiosReleaseDate = 03/27/2009
SystemManufacturer = Acer
SystemProductName = Aspire M1800
CPUID:        "Intel(R) Core(TM)2 Duo CPU     E7400  @ 2.80GHz"
MaxSpeed:     2800
CurrentSpeed: 2800
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Wed Jan 18 04:00:05.224 2012 (UTC - 5:00)
System Uptime: 0 days 0:00:17.550
Probably caused by : ntkrnlmp.exe ( nt!CmpDestroySecurityCache+3a )
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
BUGCHECK_STR:  0x7E
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_0x7E_nt!CmpDestroySecurityCache+3a
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Tue Jan 17 21:20:17.416 2012 (UTC - 5:00)
System Uptime: 0 days 0:06:11.726
Probably caused by : win32k.sys ( win32k+cbc64 )
EXCEPTION_CODE: (NTSTATUS) 0xc0000065 - The specified group already exists.
BUGCHECK_STR:  0x3B
PROCESS_NAME:  iexplore.exe
FAILURE_BUCKET_ID:  X64_0x3B_win32k+cbc64
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Mon Jan 16 07:02:09.872 2012 (UTC - 5:00)
System Uptime: 0 days 11:28:10.182
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : memory_corruption
EXCEPTION_CODE: (NTSTATUS) 0xc0000096 - {EXCEPTION}  Privileged instruction.
BUGCHECK_STR:  0x3B
PROCESS_NAME:  csrss.exe
FAILURE_BUCKET_ID:  X64_MEMORY_CORRUPTION_ONE_BIT_LARGE
BiosReleaseDate = 03/27/2009
SystemManufacturer = Acer
SystemProductName = Aspire M1800
CPUID:        "Intel(R) Core(TM)2 Duo CPU     E7400  @ 2.80GHz"
MaxSpeed:     2800
CurrentSpeed: 2800
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Sun Jan 15 19:32:44.220 2012 (UTC - 5:00)
System Uptime: 0 days 0:06:22.530
Probably caused by : ntkrnlmp.exe ( nt!KiKernelCalloutExceptionHandler+e )
EXCEPTION_CODE: (Win32) 0 (0) - The operation completed successfully.
ERROR_CODE: (NTSTATUS) 0 - STATUS_WAIT_0
BUGCHECK_STR:  0x1E_0
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_0x1E_0_nt!KiKernelCalloutExceptionHandler+e
BiosReleaseDate = 03/27/2009
SystemManufacturer = Acer
SystemProductName = Aspire M1800
CPUID:        "Intel(R) Core(TM)2 Duo CPU     E7400  @ 2.80GHz"
MaxSpeed:     2800
CurrentSpeed: 2800
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Thu Dec 29 19:44:53.620 2011 (UTC - 5:00)
System Uptime: 0 days 0:15:38.945
Probably caused by : hardware ( nt!KiSystemServiceCopyEnd+17 )
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
BUGCHECK_STR:  0x3B
PROCESS_NAME:  svchost.exe
FAILURE_BUCKET_ID:  X64_IP_MISALIGNED
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  
[/font]

 

[starocean01]

so i installed the new driver from nvidia and removed daemon tools.
i proceeded to enable verifier and when i rebooted my comp i ran into a BSOD, it was to do with the uxpatch.sys...and i think i might know why...i had modified it before to use custom themes...which i dont use anymore...googling it has not helped..

edit: i restarted the computer a few times and its running now....weird...
well..i had the comp on for about 5hrs, i think it ran into an error and restarted...and then it froze and the welcome screen...i rebooted the comp again got this 0x00000007E BSOD

edit: memtest did not work...i set the bios to boot usb first but for reason its still not booting into memtest.........

 

[starocean01]

Ran 3 tests with Prime95, everything was fine 0 errors.

 

[mgorman87]

so i installed the new driver from nvidia and removed daemon tools.
i proceeded to enable verifier and when i rebooted my comp i ran into a BSOD, it was to do with the uxpatch.sys...and i think i might know why...i had modified it before to use custom themes...which i dont use anymore...googling it has not helped..

edit: i restarted the computer a few times and its running now....weird...
well..i had the comp on for about 5hrs, i think it ran into an error and restarted...and then it froze and the welcome screen...i rebooted the comp again got this 0x00000007E BSOD

edit: memtest did not work...i set the bios to boot usb first but for reason its still not booting into memtest.........

You need to get that driver removed since it is causing a BSOD. As for memtest, try running from CD. USB doesn't always work good.

Also, please upload a new report so I can examine the new dump files when I get home from work.

 

[starocean01]

ok so i uninstalled the new nvidia drivers and instead installed an older version 275.33 i think, have not gotten any errors so far, heres the latest dump.

the hd drive passed from seatool scan short and long except for the usb dirves (compact flash, sd/mmc etc)

edit: i ran memtest but because i wasnt allowed to have the comp running overnight (comp in brothers room..) i had to stop it after 3 passes...

 

[mgorman87]

Disable driver verifier at this time. You got a lot of STOP 0x116 errors and a lot of verified crashes blaming windows drivers which means the problem is mostly likely hardware.

Event[2533]:
  Log Name: System
  Source: Ntfs
  Date: 2012-01-19T11:32:51.257
  Event ID: 55
  Task: N/A
  Level: Error
  Opcode: N/A
  Keyword: Classic
  User: N/A
  User Name: N/A
  Computer: Railgun7
  Description: 
The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume C:.

Please run a CHKDSK on your drive - http://www.sevenforums.com/tutorials/433-disk-check.html


Also run a system file check to repair any damaged/missing system files - http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

I also need you to run memtest again. This time though I need you to run one stick at a time. 7-8 passes on each stick.

As for your video card problem, I would like for you to go into device manager and uninstall the device. Make sure you select the option to remove the driver software. Reboot the computer and then install the latest drivers you downloaded earlier for your card.

Let me know the results of all the tests


BSOD BUGCHECK SUMMARY

[font=lucida console]
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Sun Jan 22 21:50:55.118 2012 (UTC - 5:00)
System Uptime: 0 days 0:00:35.443
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+1759c8 )
BUGCHECK_STR:  0x116
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_0x116_IMAGE_nvlddmkm.sys
BiosReleaseDate = 08/01/2009
SystemManufacturer = Acer
SystemProductName = Aspire M1800
CPUID:        "Intel(R) Core(TM)2 Duo CPU     E7400  @ 2.80GHz"
MaxSpeed:     2800
CurrentSpeed: 2800
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Sun Jan 22 05:34:18.020 2012 (UTC - 5:00)
System Uptime: 0 days 0:00:28.329
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+1759c8 )
BUGCHECK_STR:  0x116
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_0x116_IMAGE_nvlddmkm.sys
BiosReleaseDate = 08/01/2009
SystemManufacturer = Acer
SystemProductName = Aspire M1800
CPUID:        "Intel(R) Core(TM)2 Duo CPU     E7400  @ 2.80GHz"
MaxSpeed:     2800
CurrentSpeed: 2800
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Sun Jan 22 05:24:35.450 2012 (UTC - 5:00)
System Uptime: 0 days 0:00:33.635
Probably caused by : ntkrnlmp.exe ( nt!RtlDispatchException+122 )
DEFAULT_BUCKET_ID:  VERIFIER_ENABLED_VISTA_MINIDUMP
BUGCHECK_STR:  0xA
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_0xA_VRF_nt!RtlDispatchException+122
BiosReleaseDate = 08/01/2009
SystemManufacturer = Acer
SystemProductName = Aspire M1800
CPUID:        "Intel(R) Core(TM)2 Duo CPU     E7400  @ 2.80GHz"
MaxSpeed:     2800
CurrentSpeed: 2800
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Sun Jan 22 04:43:05.698 2012 (UTC - 5:00)
System Uptime: 0 days 0:00:24.008
Probably caused by : cdrom.sys ( cdrom!RequestSendMcnRequest+5a )
DEFAULT_BUCKET_ID:  VERIFIER_ENABLED_VISTA_MINIDUMP
BUGCHECK_STR:  0xA
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_0xA_VRF_cdrom!RequestSendMcnRequest+5a
BiosReleaseDate = 08/01/2009
SystemManufacturer = Acer
SystemProductName = Aspire M1800
CPUID:        "Intel(R) Core(TM)2 Duo CPU     E7400  @ 2.80GHz"
MaxSpeed:     2800
CurrentSpeed: 2800
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Sun Jan 22 04:24:36.106 2012 (UTC - 5:00)
System Uptime: 0 days 0:28:23.416
Probably caused by : ntkrnlmp.exe ( nt!VerifierBugCheckIfAppropriate+3c )
DRIVER_VERIFIER_DETECTED_VIOLATION (c4)
BUGCHECK_STR:  0xc4_e3
DEFAULT_BUCKET_ID:  VERIFIER_ENABLED_VISTA_MINIDUMP
PROCESS_NAME:  ekrn.exe
FAILURE_BUCKET_ID:  X64_0xc4_e3_VRF_nt!VerifierBugCheckIfAppropriate+3c
BiosReleaseDate = 08/01/2009
SystemManufacturer = Acer
SystemProductName = Aspire M1800
CPUID:        "Intel(R) Core(TM)2 Duo CPU     E7400  @ 2.80GHz"
MaxSpeed:     2800
CurrentSpeed: 2800
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Sun Jan 22 03:55:01.054 2012 (UTC - 5:00)
System Uptime: 0 days 0:00:27.239
Probably caused by : cng.sys ( cng!GatherRandomKey+22c )
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
DEFAULT_BUCKET_ID:  VERIFIER_ENABLED_VISTA_MINIDUMP
PROCESS_NAME:  System
ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
BUGCHECK_STR:  0x7E
FAILURE_BUCKET_ID:  X64_0x7E_VRF_NULL_IP_cng!GatherRandomKey+22c
BiosReleaseDate = 08/01/2009
SystemManufacturer = Acer
SystemProductName = Aspire M1800
CPUID:        "Intel(R) Core(TM)2 Duo CPU     E7400  @ 2.80GHz"
MaxSpeed:     2800
CurrentSpeed: 2800
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Sun Jan 22 03:53:48.823 2012 (UTC - 5:00)
System Uptime: 0 days 0:00:24.133
Probably caused by : ntkrnlmp.exe ( nt!RtlDispatchException+122 )
DEFAULT_BUCKET_ID:  VERIFIER_ENABLED_VISTA_MINIDUMP
BUGCHECK_STR:  0xA
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_0xA_VRF_nt!RtlDispatchException+122
BiosReleaseDate = 08/01/2009
SystemManufacturer = Acer
SystemProductName = Aspire M1800
CPUID:        "Intel(R) Core(TM)2 Duo CPU     E7400  @ 2.80GHz"
MaxSpeed:     2800
CurrentSpeed: 2800
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Sun Jan 22 03:32:17.970 2012 (UTC - 5:00)
System Uptime: 0 days 0:00:30.279
Probably caused by : ntkrnlmp.exe ( nt!RtlDispatchException+122 )
DEFAULT_BUCKET_ID:  VERIFIER_ENABLED_VISTA_MINIDUMP
BUGCHECK_STR:  0xA
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_0xA_VRF_nt!RtlDispatchException+122
BiosReleaseDate = 08/01/2009
SystemManufacturer = Acer
SystemProductName = Aspire M1800
CPUID:        "Intel(R) Core(TM)2 Duo CPU     E7400  @ 2.80GHz"
MaxSpeed:     2800
CurrentSpeed: 2800
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Sat Jan 21 22:10:01.511 2012 (UTC - 5:00)
System Uptime: 0 days 0:00:33.836
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+1759c8 )
BUGCHECK_STR:  0x116
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_0x116_IMAGE_nvlddmkm.sys
BiosReleaseDate = 08/01/2009
SystemManufacturer = Acer
SystemProductName = Aspire M1800
CPUID:        "Intel(R) Core(TM)2 Duo CPU     E7400  @ 2.80GHz"
MaxSpeed:     2800
CurrentSpeed: 2800
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Sat Jan 21 22:03:10.667 2012 (UTC - 5:00)
System Uptime: 0 days 0:00:23.977
Probably caused by : ntkrnlmp.exe ( nt!RtlDispatchException+122 )
DEFAULT_BUCKET_ID:  VERIFIER_ENABLED_VISTA_MINIDUMP
BUGCHECK_STR:  0xA
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_0xA_VRF_nt!RtlDispatchException+122
BiosReleaseDate = 08/01/2009
SystemManufacturer = Acer
SystemProductName = Aspire M1800
CPUID:        "Intel(R) Core(TM)2 Duo CPU     E7400  @ 2.80GHz"
MaxSpeed:     2800
CurrentSpeed: 2800
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Sat Jan 21 21:21:25.834 2012 (UTC - 5:00)
System Uptime: 0 days 0:00:27.144
*** WARNING: Unable to verify timestamp for uxpatch.sys
*** ERROR: Module load completed but symbols could not be loaded for uxpatch.sys
Probably caused by : uxpatch.sys ( uxpatch+1eb9 )
DEFAULT_BUCKET_ID:  VERIFIER_ENABLED_VISTA_MINIDUMP
BUGCHECK_STR:  0xD6
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_0xD6_VRF_uxpatch+1eb9
BiosReleaseDate = 08/01/2009
SystemManufacturer = Acer
SystemProductName = Aspire M1800
CPUID:        "Intel(R) Core(TM)2 Duo CPU     E7400  @ 2.80GHz"
MaxSpeed:     2800
CurrentSpeed: 2800
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Sat Jan 21 20:45:37.143 2012 (UTC - 5:00)
System Uptime: 0 days 0:01:07.643
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : win32k.sys ( win32k+a172e )
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
BUGCHECK_STR:  0x3B
PROCESS_NAME:  explorer.exe
FAILURE_BUCKET_ID:  X64_0x3B_win32k+a172e
BiosReleaseDate = 08/01/2009
SystemManufacturer = Acer
SystemProductName = Aspire M1800
CPUID:        "Intel(R) Core(TM)2 Duo CPU     E7400  @ 2.80GHz"
MaxSpeed:     2800
CurrentSpeed: 2800
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Sat Jan 21 20:42:36.384 2012 (UTC - 5:00)
System Uptime: 0 days 0:00:34.710
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+1759c8 )
BUGCHECK_STR:  0x116
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_0x116_IMAGE_nvlddmkm.sys
BiosReleaseDate = 08/01/2009
SystemManufacturer = Acer
SystemProductName = Aspire M1800
CPUID:        "Intel(R) Core(TM)2 Duo CPU     E7400  @ 2.80GHz"
MaxSpeed:     2800
CurrentSpeed: 2800
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Sat Jan 21 20:32:29.478 2012 (UTC - 5:00)
System Uptime: 0 days 0:00:35.678
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+1759c8 )
BUGCHECK_STR:  0x116
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_0x116_IMAGE_nvlddmkm.sys
BiosReleaseDate = 08/01/2009
SystemManufacturer = Acer
SystemProductName = Aspire M1800
CPUID:        "Intel(R) Core(TM)2 Duo CPU     E7400  @ 2.80GHz"
MaxSpeed:     2800
CurrentSpeed: 2800
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  
[/font]

 

[starocean01]

ive been using the comp for the whole day, since the uninstalling and installing the old driver i havent gotten 1 bsod, i think its safe to say its fixed =S
however i will still run the disk check and scan
thanks for the help!

 

[mgorman87]

Glad to hear. Post back if the problem doesn't go away