Solved BSOD using PCI device, 0x124

[axe0]

It is caused by the Intel(R) 9 Series Chipset Family SATA AHCI Controller.
I am not sure if you need the Intel chipset or the Intel RST drivers, so I would suggest to update/reinstall them both

fffff880`0393f930  fffff880`01dbc000Unable to load image iaStorF.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for iaStorF.sys
*** ERROR: Module load completed but symbols could not be loaded for iaStorF.sys
 iaStorF+0x7000

15: kd> lmvm iastorf
Browse full module list
start             end                 module name
fffff880`01db5000 fffff880`01dc0000   iaStorF  T (no symbols)           
    Loaded symbol image file: iaStorF.sys
    Image path: iaStorF.sys
    Image name: iaStorF.sys
    Browse all global symbols  functions  data
    Timestamp:        Sat May 03 01:07:00 2014 (53642514)
    CheckSum:         00014B9E
    ImageSize:        0000B000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

 

[atalanov]

I re-installed the intel RST drivers, and have not yet had any problems. Thank you very much for helping out with this. I will wait to mark this as solved in case the computer crashes again, but if it keeps running well for a while I will mark it as solved.

 

[axe0]

Good to hear

 

[atalanov]

It's been running great so far, and no issues with blue screen at all. Thank you very much for you help! It is very much appreciated! In summary, the fix was moving the PCI/PCIe device to a different PCIe slot on the mobo.