BSOD while playing Grid 2 and far cry 3

[tvliegen]

Hi,

I have a -maximus Gene Vi
-i7 4770k
-8 GB DDR3 2400Mhz
-Geforce gtx 760 2GB windforce 3X
-PSU corsair RM750
-2 X SSD
144Hz asus screen 24 inch
View attachment 365489

 

[essenbe]

Hello, tvliegen welcome to the forums. I checked the last 5 or so dump files and they were all pretty much the same.

Use !analyze -v to get detailed debugging information.
[COLOR=red]BugCheck 124[/COLOR], {0, fffffa8007491028, bf800000, 124}
Probably caused by : GenuineIntel
Followup: MachineOwner

That error code is a generic Hardware problem although none of the dump files give a clue to which component it is. Have you added or replaced any hardware recently or installed any new software? If so it may help.

Please open an elevated command prompt ( click start, type cmd in the search box, right click on the cmd entry and select run as administrator) in the black box that opens, copy/paste sfc /scannow. If you decide to type it, notice the space between the sfc and the /. It is a system file checker which will scan your system files and attempt to correct any missing or corrupt files. What we want are the results to say windows found no integrity violations. If it says files were found but could not be repaired, close the box, reboot and run it again, after opening the administrative command prompt. You may have to reboot and run it three times for it to repair all system files. If it can't repair them after 3 reboots, let us know.

If you would, please reinstall your Graphics driver but do it using this tutorial. But, please only install the Graphics driver and PhysX. http://www.sevenforums.com/tutorials/327414-nvidia-drivers-avoid-problems.html.

Also please make sure your Firmware is up to date on your SSDs. I trust you are not running them in Raid.

 

[tvliegen]

Run that scan but found no integrity violations. I changed the psu from 650 to 750. But that was after i started to get these bsod. It didn't fix it.

 

[essenbe]

Did you reinstall your drivers going by the tutorial? Are your SSDs Firmware up to date? Have you added any new hardware or software just before this started. Are you overclocking anything? If you are, set everything back to default levels. Next BSOD, please upload the BSOD posting instructions here in a new post.