Solved BSOD!! While playing Mafia 2 on Steam and Magic the gathering Tactics.

[Ugad]

Both the games i get blue scren on are thru Steam. I havent had problems eith any other games doing this.

Here is my error message.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA800511B8F8
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1


Windows 7 Pro 64, not original OS, full retail, hardware is 2-3 years old, OS was installed last year, has never been reinstalled but this computer just gets upgraded as time goes by.

 

[writhziden]

Start with http://www.sevenforums.com/crash-lockup-debug-how/35349-stop-0x124-what-means-what-try.html and use the following to supplement the steps in that link:

• Monitor temperatures during the following tests.
  
  Use the following programs to monitor the temperatures.​
  • Real Temp is a good CPU temperature monitor.
  • Speccy - System Information - Free Download will monitor all hardware temperatures.
  • HWiNFO, HWiNFO32 & HWiNFO64 - Hardware Information and Analysis Tools can be inaccurate for CPU temperatures, but is a good program for GPU temperature monitoring.
  • 
    Use FurMark: VGA Stress Test, Graphics Card and GPU Stability Test, Burn-in Test, OpenGL Benchmark and GPU Temperature | oZone3D.Net to test the graphics card GPU. Then use the |MG| Video Memory Stress Test 1.7.116 Download to test your graphics card memory. Let the memory test run for at least seven passes; the more the better.
    
    
  • Run http://www.sevenforums.com/tutorials/100352-hardware-stress-test-prime95.html to determine any hardware problems. Run all three tests for a few hours each. If you get errors, stop the test and post back here.
    
    
  • Follow the steps for doing a CPU stress test using IntelBurnTest
  
  
• Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).
  
  If you swap any memory components, follow these steps for ESD safety:
  1. Shut down and turn off your computer.
  2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
  3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
  4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working.
  Once these steps have been followed, it is safe to remove and replace components within your computer.

 

[Ugad]

I did everything that you said to do and everything went good until i ran prime 95. It blue screened me or just completly shut me down each time i ran it.

Here is the error message

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA80050888F8
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1
Files that help describe the problem:
C:\Windows\Minidump\032412-17531-01.dmp
C:\Users\Juan\AppData\Local\Temp\WER-30359-0.sysdata.xml

 

[writhziden]

What temperatures did it reach before it blue screened, or did it blue screen too fast to tell?

If you were unable to see the temperatures, I suspect you have a RAM, CPU, Motherboard, or PSU problem. Have you had a chance to run Memtest86+?

 

[Ugad]

Ok i think i got it going. Thanks for your help and sorry I didnt read all the instructions first. I updated all my drivers and my BIOS and everyting seems to be doing fine now. I never thought about doing that since I usually update what i can every month but i have been busy this last year


Thanks again!

 

[writhziden]

You're welcome. Glad it is stable.