BSOD while playing SW The Old Republic (currently)

[Arbaraith]

Hello.
I am getting some BSODs since the last few days. I changed the memory once already since one of my old ones was damaged (i don't know how). These new once are good according to memory test.
I reinstalled all new drivers, defragmented, scanned for viruses. Yesterday i played for hours without any problems. This morning i got Driver_IRQL_not_less_or_equal, then it would not start up for a few tries and after that i got Memory_management i think it went by too fast, sry
Attached is the Kerneldump, hope i did that right

 

[HonorGamer]

Hello, Like you said, showing memory management problems.

To start off, run a MemTest

After you do so, please post back results!

-Justin

 

[Arbaraith]

Hello
So i had to go to work this morning. Continuing the problem. I ran Memtest on both modules, i changes RAMslots for it even, no errors reportet.
I restored BIOS to default and made the proper changes again for my system.
It bootet fine so i ran a stresstest on the GFX-Card and i got a BSOD after 2min. Its not overheating i think.
Here is the new dump of the kernel.
I'll go and reinstall videodrivers i guess since it seems to be a GFX-Card problem this time?
thanks for the help

 

[Arbaraith]

hm seems it only zipped half of the files :3 or i zipped it before it was finished :3
sorry here is the newly finished version

 

[Arbaraith]

And it is really not just playing a game. After my last post i did nothing but surf the web, read some posts, then i went and left the PC running, came back and everything was fine, then without warning and me not doing anything, bluescreen and IRQL_less_or_not_equal message.

 

[HonorGamer]

I am very sorry for the late reply. Life got in the way today, and I couldn't reply like I wanted to earlier.

Lets take another look:

Probably caused by : [COLOR="Red"]cmudaxp.sys[/COLOR] ( cmudaxp+1cd36c )

This is an audio driver. Make sure it is completely up to date by uninstalling your drivers and re downloading them, and installing them manually! Download them from here: http://support.asus.com/download/download.aspx


Repost back with results please.

-Justin

 

[Arbaraith]

Don't worry, i am grateful for all the help.
So i reinstalled the audio from ASUS (very old drivers) then i installed some good reviewed UniDrivers for the card which are newer, and i got a BLue Screen barely loading into SWTOR.
I removed the card completely and am running no sound atm and i got a BLue screen.
attached is a zip1 where the PC crashed while grabbing the dumpfiles. and a zip2 after the latest crash without Audio drivers with Memory-Management.
Both sticks are ok, i checked, i used different slots even this time.
I ran crystal DiskInfo and it reportet that my HD with my Gamefiles has a few bad sectors and i should be cautious. I am looking for a replacement atm, but could that be the issue?
I'll take the PC apart completely this afternoon and reassemble it step by step and replace the HD or move the files to an external drive maybe.
IDK, i contacted my shop and they are sending me a replacement for a MB i have lying around that would not even start. Maybe its something deep in the MB.

 

[Arbaraith]

Ok, i removed the faulty HD and tried some HyperPi runs just to stress the system a bit i passed 1M, 2M and by 4M it went into BSOD with win32ksys and Page Fault.
that was my last idea
I'll make that reassemble this afternoon and see what it gets me.
After that i can only wait for that other MB to arrive and hope for that.

 

[Northernsoul55]

Just to add:

Your ATI video drivers are contributing to your BSOD's:

start             end                 module name
fffff880`04400000 fffff880`04494000   [COLOR=red]atikmpag[/COLOR] T           
fffff880`04a8b000 fffff880`055fe000   [COLOR=red]atikmdag[/COLOR] T 
Dated: Fri Mar 29 01:09:45 2013

You already have the latest version installed (Version 12.104.0.0)
I would suggest rolling back the driver to the previous version:

:ar: http://www.vistax64.com/tutorials/165382-device-manager-roll-back-driver.html

Also disable any update program associated with ATI drivers.

Stress test your graphics card:

Video Card - Stress Test with Furmark: :ar: Video Card - Stress Test with Furmark

Monitor temperature of the system during the tests:

:ar: Speccy System Information
:ar: HWMonitor

If the card passes the stress test, try in another PCIe slot (if possible).

Cheers

Dave

 

[YoYo155]

The bugchecks you're experiencing seem to come from multiple directions.

First remove Avast as it has played a role in several dumps, and it is well known to cause
bugchecks as do most 3rd party anti-virus software.

1. Remove avast using avast! Uninstall Utility | Download aswClear for avast! Removal
2. Install Microsoft Security Essentials as a reliable alternative.

---

Your PC shows signs of infection.

• After installing Microsoft Security Essentials, update and perform a full system scan.
• Then install and do the same with Malwarebytes.

   Note

:info: Do not start the trial version of MalwareBytes

• Download TDSS-Killer and scan for rootkits.
• Download Windows Defender Offline and scan for other types of infections.
• Use the SFC /Scannow Command to mend any damaged files.

fffff880`0311b9f8  fffff960`0025c000*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
 win32k+0x23c000

lmvm win32k
start             end                 module name
fffff960`00020000 fffff960`00337000   win32k   T (no symbols)           
    Loaded symbol image file: win32k.sys
    Image path: \SystemRoot\System32\win32k.sys
    Image name: win32k.sys
    Timestamp:        unavailable (00000000)
    CheckSum:         00000000
    ImageSize:        00317000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

---

Test the HDD:

1. Perform a Disk Check | Disk Check
2. Then Post the results following | THIS METHOD
3. Download SeaTools for Windows if you don't want to use a CD to test the HDD you can use YUMI – Multiboot USB Creator to create a bootable USB (instructions are found at the bottom of both pages).
4. If SeaTools for Windows is unable to recognize your HDD visit HDDdiag and follow the instructions.

Test the RAM:

Test and Diagnose RAM Issues with Memtest86+:

• RAM - Test with Memtest86+

   Tip

• :info: Pay close attention to part 3 of the tutorial "If you have errors"
• :tip: Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.

Once done post a picture of the result.

---

Outdated drivers:

athrx.sys Tue Jun 09 21:06:49 2009

• Driver Reference Table - athrx.sys

cmudaxp.sys Thu Mar 10 09:44:15 2011

• Driver Reference Table - cmudaxp.sys

Update:


athrx.sys

• [COLOR=black]Release: [/COLOR][B]2013-05-27 [/B]
  [LEFT][COLOR=black]Version:[/COLOR] [B]10.0.0.251[/B][/LEFT]

cmudaxp.sys, couldn't find it in use in your MSINFO32 file what type of sound are you using?

[B]Driver Description:  [/B]C-Media Audio Interface Driver (WDM) by C-Media  
  ASUS Xonar DG Audio Interface driver  
  HTO CLARO Audio Interface Driver

Remove:

ObjectDock    Stardock    c:\program files (x86)\utilities\objectdockfree\objectdock.exe

VCDDaemon    Elaborate Bytes AG    c:\program files (x86)\elaborate bytes\virtualclonedrive\vcddaemon.exe

cursorxp.exe    c:\program files (x86)\cursorxp\cursorxp.exe

zatray.exe    c:\program files (x86)\checkpoint\zonealarm\zatray.exe

dock64.exe    c:\program files (x86)\utilities\objectdockfree\dock64.exe

Post back with the results .

 

[Arbaraith]

Oh my, i am turning red and am so embarrassed atm. First off thank you all for the help.
Now, as i said i went on and disassembled the whole freaking thing this evening. I replaced all cables, cleaned everything as i was taking it out, GFX, CPUcooler and all that. During that i turned the case and suddenly...seriously i am never gonna live that down...a screw came out that seems to have been lodged behind the board...now...that never happened to me before in all the PCs i assembled...
So i give you permission to hunt me down and kick me if you ever come to Germany.
I ran some HyperPi for the CPU and some Kombustor for the GFXCard, no blue screen. I reinstalled my Asus Xonar DS and new drivers, no blue screen. I am playing 5hrs and counting now, no blue screens
So i thank you all from the bottom of my heart and i cannot say how sorry i am for the trouble caused by a screw I overlooked while assembling the damn thing in the first place.
So until the next blue screen that will hopefully never happen, but this is windows and i have many loose screws to misplace inside cases....

 

[HonorGamer]

Haha Well good deal! It's okay we all make mistakes like that!

Just glad it's fixed now, and sorry it took longer than expected to solve the problem!

-Justin