BSOD

[BBall]

1 Windows 71- 1x64 ?
- the original installed OS on the system?
Original was Win XP, x86 and it has run x64
- an OEM or full retail version?
- Purchased OEM
- What is the age of system (hardware)?
only about a year or 2 old.
- What is the age of OS installation
3 days.

 

[BBall]

Error 0x00000101

Heres are the dumps. I couldn't get it to start up in Win7 normal mode anymore and when it tried to repair itself this time the repiar tool bluescreened as well. It may be an actuall processor error. I don't know i"m at a loss.

Error 0x101 keeps popping up but the cause of the error is usually a random ntoskernal or some other item. I recorded about 6 different files that caused it via the Bluescreenviewer application before the system became really unstable.

 

[Tews]

All of your .dmp files were inconclusive in their analysis... 0x101 .. We need to enable driver verifier to further pinpoint the reason for your crashes...

- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

 

[CarlTR6]

You definitely have a hardware problem. Three of the dumps were error code 101. Please read these threads on Stop error 101. Post back with any questions that you have.


http://www.sevenforums.com/crash-lo..._watchdog_timeout-troubleshtg.html#post567135

http://www.sevenforums.com/crashes-debugging/35427-win-7-clock-interrupt-bsod-101-error.html#post356791

Edited to add: Tews and I were posting at the same time.

 

[BBall]

Thats the tricky part. The system is so unstable with the win7 updates that I can no longer repair. I'll need to do another fresh install and start from square 1 again. I'll get something for you guys as soon as I can. what I do know is before 43 microsoft updates it will stay up 24hours + without any crashes(once I get all my drivers set) I hadn't tried to install any download intensive games or memory intensive games yet though (IE LoL or WoW) Once I install those 43 Microsoft updates (some critical some important) the system will become increasingly unstable until What just occurred happened where when it tries to repair the startup it blue screens.

The only drivers that are affected in the updates after I looked at each one is actually a Fix for a 4gig usb error with Nvidia chipsets that modifies the Windows USB drivers,

There IS a USB controller that Windows does not recognize in my device manager. I have it disabled currently in windows though with the updates it doesn't seem to matter. Also Windows will state that it was unable to install drivers for a generic drive though I have only my RAZOR imperator ( made for win 7) and logitech G110 plugged in.

 

[BBall]

Very Very Interesting

Well after this install of Win 7 I haven't recieved one bluescreen yet. I've updated the windows updates I was willing too, But i also replaced my Processor fan heatsync with a 3rd party vendor one instead of the AMD that came with it. Either I finally had a good setup, or the fan/heatsync was going out and I needed to replace causing overheating in the Processor itself. Going to try out what you have posted to see if I can get it to bluescreen.

 

[BBall]

The Bluescreen.

here it is, updated after a fresh install, after the verifier stress it bluescreened before windows even had a chance to start up causing the system repair to kick in.

 

[CarlTR6]

No dump file included. Try this: http://www.sevenforums.com/tutorials/83172-dump-files-upload-seven-forums.html

 

[BBall]

Hmmm!

Very interesting indeed.

 

[CarlTR6]

This is a Driver Verifier enabled dump. The error code is A, IRQL_NOT_LESS_OR_EQUAL. The dump blames dxgkrnl.sys which is a Direct X driver. This is very likely not the actual cause. The system crashed early and that indicates a hardware problem

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\Owner\AppData\Local\Temp\Temp1_082610-31640-01.zip\082610-31640-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*[URL]http://msdl.microsoft.com/download/symbols[/URL]
Executable search path is: 
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`02a0e000 PsLoadedModuleList = 0xfffff800`02c4be50
Debug session time: Thu Aug 26 16:52:18.765 2010 (GMT-4)
System Uptime: 0 days 0:00:12.125
Loading Kernel Symbols
...............................................................
............................
Loading User Symbols
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {0, 2, 0, fffff80002a9e2b3}

Probably caused by : dxgkrnl.sys ( dxgkrnl!DpiFdoInitializeFdo+11d )

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, bitfield :
    bit 0 : value 0 = read operation, 1 = write operation
    bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80002a9e2b3, address which referenced memory

Debugging Details:
------------------


READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80002cb60e0
 0000000000000000 

CURRENT_IRQL:  2

FAULTING_IP: 
nt!IopCompleteRequest+ae3
fffff800`02a9e2b3 488b09          mov     rcx,qword ptr [rcx]

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VERIFIER_ENABLED_VISTA_MINIDUMP

BUGCHECK_STR:  0xA

PROCESS_NAME:  System

IRP_ADDRESS:  ffffffffffffff89

TRAP_FRAME:  fffff88002fc37b0 -- (.trap 0xfffff88002fc37b0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffff88002fc3f80 rbx=0000000000000000 rcx=0000000000000000
rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80002a9e2b3 rsp=fffff88002fc3940 rbp=fffff88002fc3a90
 r8=fffff88002fc3a48  r9=fffff88002fc3a40 r10=0000000000000002
r11=fffff80002a9d7d0 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl nz na pe cy
nt!IopCompleteRequest+0xae3:
fffff800`02a9e2b3 488b09          mov     rcx,qword ptr [rcx] ds:00d5:00000000`00000000=????????????????
Resetting default scope

LOCK_ADDRESS:  fffff80002c82400 -- (!locks fffff80002c82400)

Resource @ nt!PiEngineLock (0xfffff80002c82400)    Available

WARNING: SystemResourcesList->Flink chain invalid. Resource may be corrupted, or already deleted.


WARNING: SystemResourcesList->Blink chain invalid. Resource may be corrupted, or already deleted.

1 total locks

PNP_TRIAGE: 
    Lock address  : 0xfffff80002c82400
    Thread Count  : 0
    Thread address: 0x0000000000000000
    Thread wait   : 0x0

LAST_CONTROL_TRANSFER:  from fffff80002a7dca9 to fffff80002a7e740

STACK_TEXT:  
fffff880`02fc3668 fffff800`02a7dca9 : 00000000`0000000a 00000000`00000000 00000000`00000002 00000000`00000000 : nt!KeBugCheckEx
fffff880`02fc3670 fffff800`02a7c920 : fffff880`02fc3730 fffff980`0290aee0 00000000`00000000 fffff880`02fc35a0 : nt!KiBugCheckDispatch+0x69
fffff880`02fc37b0 fffff800`02a9e2b3 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiPageFault+0x260
fffff880`02fc3940 fffff800`02a5b0c7 : 00000000`00000001 fffff800`02dc17f3 fffffa80`05d3f000 fffff880`00000000 : nt!IopCompleteRequest+0xae3
fffff880`02fc3a10 fffff800`02a5b487 : fffff8a0`00003170 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiDeliverApc+0x1d7
fffff880`02fc3a90 fffff800`02d72d5b : 00000000`00000000 00000000`00000003 00000000`00000240 00000000`00000011 : nt!KiApcInterrupt+0xd7
fffff880`02fc3c20 fffff800`02d77ab5 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000200 : nt!ObReferenceObjectByHandleWithTag+0xfb
fffff880`02fc3cf0 fffff800`02d7ce4d : fffffa80`05d3f010 fffff880`02fc3e50 fffffa80`00000240 fffffa80`03718270 : nt!ObpLookupObjectName+0x1b5
fffff880`02fc3df0 fffff800`02d5bdcc : ffffffff`8000005c 00000000`00000000 00000000`00000000 fffff800`02f19ca5 : nt!ObOpenObjectByName+0x1cd
fffff880`02fc3ea0 fffff800`02d5efca : fffff880`02fc4288 fffff800`00020019 fffff880`02fc41f0 00000000`00000000 : nt!CmOpenKey+0x28a
fffff880`02fc3ff0 fffff800`02a7d993 : fffff880`02fc4030 fffff6fb`7e000000 00000000`00000000 00000000`000001f0 : nt!NtOpenKey+0x12
fffff880`02fc4030 fffff800`02a79f30 : fffff800`02cef498 00000000`00000000 fffffa80`00000000 fffff880`02fc4288 : nt!KiSystemServiceCopyEnd+0x13
fffff880`02fc41c8 fffff800`02cef498 : 00000000`00000000 fffffa80`00000000 fffff880`02fc4288 fffff800`02d3a3f4 : nt!KiServiceLinkage
fffff880`02fc41d0 fffff800`02b6633a : fffffa80`056c9bc0 fffff880`02fc4300 00000000`00000001 fffff800`02a79f30 : nt!IopOpenRegistryKeyEx+0x38
fffff880`02fc4230 fffff800`02e7311d : fffffa80`05311708 00000000`00000000 ffffffff`8000005c fffff8a0`00000004 : nt!PipCheckForDenyExecute+0x9a
fffff880`02fc4280 fffff800`02e7336e : 00000000`00000000 fffffa80`056c9bc0 fffffa80`05311708 fffff880`02fc43a0 : nt!IopRegisterDeviceInterface+0x14d
fffff880`02fc4340 fffff880`043714d1 : 00000000`0000003c fffffa80`056c95d0 fffffa80`056c9480 fffffa80`056c9500 : nt!IoRegisterDeviceInterface+0xce
fffff880`02fc43a0 fffff880`0436bfe6 : 00000000`fffff90d 00000000`00000307 00000000`00000000 ffffffff`00000014 : dxgkrnl!DpiFdoInitializeFdo+0x11d
fffff880`02fc4430 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : dxgkrnl!DpiAddDevice+0x8c6


STACK_COMMAND:  kb

FOLLOWUP_IP: 
dxgkrnl!DpiFdoInitializeFdo+11d
fffff880`043714d1 4863f8          movsxd  rdi,eax

SYMBOL_STACK_INDEX:  11

SYMBOL_NAME:  dxgkrnl!DpiFdoInitializeFdo+11d

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: dxgkrnl

IMAGE_NAME:  dxgkrnl.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  4ac5509e

FAILURE_BUCKET_ID:  X64_0xA_VRF_dxgkrnl!DpiFdoInitializeFdo+11d

BUCKET_ID:  X64_0xA_VRF_dxgkrnl!DpiFdoInitializeFdo+11d

Followup: MachineOwner
---------

I find an out of date driver on your system. Windows & does not like older drivers. I cannot say this driver contributed to the crash; but try to update it to eliminate it as a problem. Update it from the NVidia website.

nvsmu.sys Mon Jun 29 03:36:37 2009 - nVidia nForce System Management Controller (nVidia nForce chipset driver) Drivers - Download NVIDIA Drivers

Since you are getting the BSOD so quickly and it is pointing to Microsoft files, turn Driver Verifier off. Did you go through any of the troubleshooting procedures in these links?

http://www.sevenforums.com/crash-loc...tml#post567135

http://www.sevenforums.com/crashes-debugging/35427-win-7-clock-interrupt-bsod-101-error.html#post356791

If not, please do so and report back with what you did and what you found. We will go from there.

 

[BBall]

thats kind of crazy considering it's a fresh install, and I had downloaded the drivers today directly from the site.

 

[CarlTR6]

Go to the NVidia site and search for that driver. See if there is one dated July13, 2009 or later. This date is the date for Win 7 drivers. Ssome drivers dated prior to this date work fine with Win 7; but many do not.

Have you followed the procedures outlined in this threads?

http://www.sevenforums.com/crash-loc...tml#post567135

http://www.sevenforums.com/crashes-debugging/35427-win-7-clock-interrupt-bsod-101-error.html#post356791

 

[BBall]

Actually I've gone about this long without a crash since I got a new heatsync and Fan. I've thought about it too. WinXP x32 may have not been utilizing the Full quad core thus causing less heat and the Heatsync/fan I had in there that came with it could handle it (i've heard prior complaints about the fans that come with the quads not being the best) SO when I moved to win 7 it used the full quad which produced more heat and bam. Lock ups due to Overheating processor. I hit the website and apparently The Nvidia driver which was out of date was the HDMI driver that is on the MOBO. So everything is up to date, Win7 is happy with the Temp inside the case and I've yet to actaully have a crash since then. I've been runnin it raggad too trying to get it to crash.

 

[CarlTR6]

Thank you for reporting back with what you have done. Sure glad to hear you are running smoothly. There is no doubt that heat will cause a crash; I think your diagnosis is probably accurate. Do you think we can mark this one as solved?

 

[BBall]

Most definitely and thank you for the patience.

 

[CarlTR6]

Thanks! Happy computing!