BSOD

[Nippe]

Can someone read these and see if it is possible to find out a reson?

 

[Maguscreed]

MEMORY_MANAGEMENT (1a)
    # Any other values for parameter 1 must be individually examined.
Arguments:
Arg1: 0000000000041790, The subtype of the bugcheck.
Arg2: fffffa8003285810
Arg3: 000000000000ffff
Arg4: 0000000000000000

Debugging Details:
------------------


BUGCHECK_STR:  0x1a_41790

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

PROCESS_NAME:  Steam.exe

CURRENT_IRQL:  0

LAST_CONTROL_TRANSFER:  from fffff80002efff9e to fffff80002e8c740

STACK_TEXT:  
fffff880`0b062968 fffff800`02efff9e : 00000000`0000001a 00000000`00041790 fffffa80`03285810 00000000`0000ffff : nt!KeBugCheckEx
fffff880`0b062970 fffff800`02ece0da : 00000000`00000000 00000000`0b201fff fffffa80`00000000 fffffa80`00000000 : nt! ?? ::FNODOBFM::`string'+0x33906
fffff880`0b062b30 fffff800`02e8b993 : ffffffff`ffffffff 00000000`0376e810 00000000`0376e808 fffffa80`00008000 : nt!NtFreeVirtualMemory+0x5ca
fffff880`0b062c20 00000000`7779f89a : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`0376e7d8 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x7779f89a


STACK_COMMAND:  kb

FOLLOWUP_IP: 
nt! ?? ::FNODOBFM::`string'+33906
fffff800`02efff9e cc              int     3

SYMBOL_STACK_INDEX:  1

SYMBOL_NAME:  nt! ?? ::FNODOBFM::`string'+33906

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nt

IMAGE_NAME:  ntkrnlmp.exe

DEBUG_FLR_IMAGE_TIMESTAMP:  4cc791bd

FAILURE_BUCKET_ID:  X64_0x1a_41790_nt!_??_::FNODOBFM::_string_+33906

BUCKET_ID:  X64_0x1a_41790_nt!_??_::FNODOBFM::_string_+33906

Followup: MachineOwner
---------

Crash dump blames memory.
Before I go digging through the drivers one by one I'd like you to follow the directions at the below link. It would be best to allow it to run overnight for 5 to 7 passes.
http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html

If you have overclocked your system, it's probable that the memory is not supporting the new timing, otherwise , just run the test.

 

[Nippe]

Well I have had bsod:s after startup since i built this computer and I think that the reason is that my RAM sticks are not combatible with my motherbard. I have managed to avoid bluescreens by sleeping computer (not shutting down, if I shutdown it will bsod soon after next startup) When I run memtest after shutting down, it wont show any problems, but if I run memtest after computer has been shut down for like 4 hours problems start showing up.

 

[Maguscreed]

This is the type of situation a bios update may resolve.
Have you checked the manufacturers website to see if any bios updates address your issue directly/indirectly?

 

[Nippe]

I haven't.. I'll go and check them out.

 

[Nippe]

From ASUS support site (ASUSTeK Computer Inc. -Support- Drivers and Download P7H55-M PRO)
I found quite many updates related to memory but my current version is second newest and newest doesn't offer any memory related fixes (I think)

P7H55-M PRO BIOS 1604
1.Remove Auto hide Turbo V adjust Extreme CPU Ratio option if CPU Ratio not "Auto" function.
2.Remove Auto hide BIOS setup items with Extreme CPU "TurboMode Core Ratio Offset" if CPU Ratio not "Auto" function.
3.Remove Auto Disable HotkeyOC function for Extreme CPU if CPU Ratio not "Auto" funciton.

What about other downloads in that site?

 

[Maguscreed]

No those all seem to just be GUI changes to the bios interface itself, nothing related to performance.

Here's a thought, the system will run a bit slower while doing this, but can you pull one of the ram sticks and run the system a bit to see if the crash occurs with just one stick?

This may be a chipset driver issue.

 

[Nippe]

I think that those RAM sticks have to be used paired?

 

[Maguscreed]

For dual channel support, yes, they should function just fine independently though.