Can i run windows with 700mhz processor

[AddRAM]

Can i run windows with 700mhz processor

Windows 98 will scream

 

[bobafetthotmail]

The motherboard name and manufacturer should be printed on it, close to the RAM slots. It's likely a code like "SDR-34-FE23" (made up).
Tell that and we can tell what kinds of RAM you can take and maybe if it supports a better CPU.

 

[RoasterMen]

Installing Windows 8 for your 700mhz computer? That's an overkill for your system.

 

[philip95]

Can i run windows with 700mhz processor

Windows 98 will scream

that what already on it

 

[caperjack]

Can i run windows with 700mhz processor

Windows 98 will scream

that what already on it

hi, you have been asked a few times to give info on the motherboard of the computer so we can help you better ,but you never do .now that i knw its a working computer i will get you to do the following .if you wish ,thanks

Lets find out what you have inside.

Use Speccy to provide details of your computer's configuration.

Download, free speccy , Speccy - Download , install, and run.
After Speccy has finished gathering information, click File > Publish Snapshot.
Click Yes. A web address will be displayed.
Click Copy to Clipboard and paste it in your next post.
Include your computer's manufacturer and model number, if available.

 

[yowanvista]

Installing Windows 8 for your 700mhz computer? That's an overkill for your system.

Windows 8 won't even install on this P3 since it requires PAE, NX bit, and SSE2.

 

[philip95]

i have fixed the hard drive with windows xp on so I will most likely use this now


system spec below:

Computer:
Operating System Microsoft Windows XP Professional
OS Service Pack Service Pack 2
DirectX 4.09.00.0904 (DirectX 9.0c)
Computer Name HOME (Windows XP)
User Name Admin

Motherboard:
CPU Type AMD Duron, 700 MHz (7 x 100)
Motherboard Name Gigabyte GA-7ZX(-1)
Motherboard Chipset VIA VT8363(A) Apollo KT133(A)
System Memory 192 MB (PC133 SDRAM)
BIOS Type AMI (07/17/00)
Communication Port Communications Port (COM1)
Communication Port Communications Port (COM2)
Communication Port ECP Printer Port (LPT1)

Display:
Video Adapter 3dfx Voodoo3 (16 MB)
3D Accelerator 3Dfx Voodoo3
Monitor Jean JD177 [17" CRT] (0939001721)

Multimedia:
Audio Adapter VIA AC'97 Audio Controller [H]

Storage:
IDE Controller VIA Bus Master IDE Controller
Floppy Drive Floppy disk drive
Disk Drive ST320014A (20 GB, 5400 RPM, Ultra-ATA/100)
Disk Drive Verbatim STORE N GO USB Device (14 GB, USB)
Disk Drive FNK TECH USB CARD READER USB Device (14 GB, USB)
Optical Drive ATAPI CDROM
Optical Drive NEC CD-ROM DRIVE:273 (4x CD-ROM)
SMART Hard Disks Status OK

Partitions:
C: (NTFS) 19085 MB (12036 MB free)

Input:
Keyboard HID Keyboard Device
Keyboard PC/AT Enhanced PS/2 Keyboard (101/102-Key)
Mouse HID-compliant mouse
Mouse Microsoft PS/2 Mouse

Network:
Network Adapter NETGEAR FA311 Fast Ethernet Adapter
Modem Communications cable between two computers
Modem Lucent Win Modem #2

Peripherals:
USB1 Controller VIA VT83C572 PCI-USB Controller
USB1 Controller VIA VT83C572 PCI-USB Controller
USB1 Controller VIA VT83C572 PCI-USB Controller
USB1 Controller VIA VT83C572 PCI-USB Controller
USB2 Controller VIA USB 2.0 Enhanced Host Controller
USB Device USB Composite Device
USB Device USB Human Interface Device
USB Device USB Human Interface Device
USB Device USB Human Interface Device
USB Device USB Mass Storage Device
USB Device USB Mass Storage Device

 

[neo101]

Installing Windows 8 for your 700mhz computer? That's an overkill for your system.

Windows 8 won't even install on this P3 since it requires PAE, NX bit, and SSE2.

Correct!

I was gonna warn him about vid-card
- cos in them 'ol days manufacturers used to stick any old agp/type 1 slot in and you could fry the vid card(later version) if you pop the wrong one in.

"1 x AGP slot supports 4X mode & AGP 2.0 compliant"
You are ok they upped to v2.0
- you could use certain 8x AGP cards with this but obviously they will only run 4X

Seeing the old "VIA VT8363(A) Apollo KT133(A)"
Man - the problems overcoming Via drivers was a 'mission' in itself