Computer Detects Headphones That Aren't There

invisifly2

New member
Local time
8:38 AM
Messages
4
Hello, I have a Toshiba satellite running windows 7 home premium (64 bit).

For quite a while I've had an issue where my sound would randomly cut out.

I recently discovered (after much trial and error) that the cause of the issue is that my computer is detecting something plugged into the headphone jack when nothing is there. I very rarely use my headphones so this took a while to figure out, but when I plug them in after the speakers cut out, I can still hear everything playing in the headphones. Sometimes when I remove the headphones the sound starts playing the speakers again but not always.

I've checked to see if there is anything blocking the jack, and it's clean. What I would like to know is if there is a way to prevent my computer from automatically switching to headphones if it detects something plugged into the jack, or, if there isn't, a way to play audio out of both simultaneously. I could just keep using my headphones, but they are of rather low quality and my laptop's built in speakers sound much better.

Right clicking "Playback devices" only shows my speakers, and doesn't show my headphones (which are really nothing more than earbuds, but still) even when "show disabled devices" is selected.
 

My Computer My Computer

Computer type
PC/Desktop
OS
windows 7 (64 bit)
There would appear to be a problem with the headphone jack. Along with the contacts for your headphones, there are (can be) extra contacts for when there are no headphones plugged in. I would suspect those connections are "dirty" and not making proper contact.

Plug your headset in and out fast several times and see if that helps. If not, the jack may be cleaned with contact cleaner but that would be an internal job and not something you could do from the outside of the case. If it can't be cleaned, many PC's have a small "daughter board" that contains the I/O jacks and that is replaceable.

On SOME audio systems, there is a control panel and SOME of these have options for whether the speakers are muted or not when a headset is plugged in. Newer systems with RealTek audio have the RealTek HD Audio manager that in most cases has this. The Panel, if you have it, would be located in Control Panel/Hardware and Sound. However, you are limited to what the PC vendor allows and there are some with RealTek, for example, that do not have this option.
 

My Computer My Computer

Computer type
PC/Desktop
Computer Manufacturer/Model Number
My Own Build
OS
Windows 10 64 bit
CPU
Intel i7 6700K
Motherboard
ASUS ROG Maximus VIII Hero
Memory
16GB Corsair Dominator
Graphics Card(s)
Intel CPU Graphics
Sound Card
RealTek
Monitor(s) Displays
27" Dell S2719dgf
Screen Resolution
2560X1440
Hard Drives
1 TB Samsung 850 EVO SSD for Win 10 Pro
500GB Samsung 850 EVO SSD for Win 10 Insider
2 TB drive for backup
PSU
EVGA Supernova 750G2
Case
BeQuiet Silent Base 600
Cooling
Deepcool Captain 120EX
Keyboard
Microsoft Wireless 2000
Mouse
Microsoft wireless
Internet Speed
100 MB/sec (Cable)
Antivirus
Microsoft Defender and Malwarebytes
Browser
Edge/Firefox
Other Info
Cakewalk (Sonar) by BandLab and Studio One 4.1 Pro recording studio software. MOTU 896Mk3 Hybrid recording interface, Frontier Tranzport wireless control unit, Behringer X-Touch Control Surface.
Five USB connected optical drives for CD Audio production using Nero BurningROM
I've gotten the jacks cleaned and the issue remains, is there a way to get the software to edit the settings if it's not on my machine (because naturally I'd have the one version that doesn't)? 90% of my time online is spent listening/watching music/videos and it's getting to the point where I'm seriously considering smashing the computer with a brick.
 

My Computer My Computer

Computer type
PC/Desktop
OS
windows 7 (64 bit)
You are stuck with the sound drivers for the hardware chip you have.

Since cleaning the jack (was it really a through cleaning of all contacts? or just spray contact cleaner into the jack?), to the point it was cleaned, did not fix it, the next option would be to have the PC properly repaired.
 

My Computer My Computer

Computer type
PC/Desktop
Computer Manufacturer/Model Number
My Own Build
OS
Windows 10 64 bit
CPU
Intel i7 6700K
Motherboard
ASUS ROG Maximus VIII Hero
Memory
16GB Corsair Dominator
Graphics Card(s)
Intel CPU Graphics
Sound Card
RealTek
Monitor(s) Displays
27" Dell S2719dgf
Screen Resolution
2560X1440
Hard Drives
1 TB Samsung 850 EVO SSD for Win 10 Pro
500GB Samsung 850 EVO SSD for Win 10 Insider
2 TB drive for backup
PSU
EVGA Supernova 750G2
Case
BeQuiet Silent Base 600
Cooling
Deepcool Captain 120EX
Keyboard
Microsoft Wireless 2000
Mouse
Microsoft wireless
Internet Speed
100 MB/sec (Cable)
Antivirus
Microsoft Defender and Malwarebytes
Browser
Edge/Firefox
Other Info
Cakewalk (Sonar) by BandLab and Studio One 4.1 Pro recording studio software. MOTU 896Mk3 Hybrid recording interface, Frontier Tranzport wireless control unit, Behringer X-Touch Control Surface.
Five USB connected optical drives for CD Audio production using Nero BurningROM
Since the switch over from headphone to speaker is a physical circuit make/break in the female side of the jack, there may be one of the contacts is misaligned and a change in temperature and or humidity is enough to switch the output.
Art.
 

My Computer My Computer

Computer type
PC/Desktop
Computer Manufacturer/Model Number
Home built
OS
Win7 sp1 Pro 64bit / XP sp2 Pro (games only)
CPU
Intel Core 2 Duo E8400 @ 3.00GHz
Motherboard
Intel Corporation DP35DP (CPU1)
Memory
8.00 GB Dual-Channel DDR2 @ 400MHz (5-5-5-18)
Graphics Card(s)
1024MB GeForce GTX 560
Sound Card
NVIDIA High Definition Audio
Monitor(s) Displays
SyncMaster (2048x1152@60Hz)
Hard Drives
240GB Sandisc Extreme Pro SSD
244GB Seagate ST3250410AS
488GB Seagate ST500DM002-1BD142
931GB Western Digital WDC WD1003FZEX
PSU
Corsair 720
Case
ATX
Keyboard
HID Keyboard Device Logitech
Mouse
HID-compliant mouse Microsoft
Other Info
TSSTcorp CDDVDW SH-S223L

HL-DT-ST BD-RE BH12LS35
Today I discovered by accident that switching from the playback tab to the recording tab under the sounds menu (brought up by right clicking the speaker icon) will cause sound to start playing again much like plugging and unplugging headphones will. This only works if the mic is enabled. Disabling the mic wont cut out the sound but will prevent the trick from working when it eventually does.

Messing with the built in mic settings messed with the sound a bit too (sometimes cutting it out). I reset everything to default after playing around because it didn't fix the problem. Could I have a software issue instead? I had my headphone jacks removed and cleaned and they are perfectly fine.
 

My Computer My Computer

Computer type
PC/Desktop
OS
windows 7 (64 bit)
did you try uninstalling and reinstalling the audio drivers? If not maybe reinstalling the operating system
 

My Computer My Computer

Computer type
PC/Desktop
OS
Windows 7/8 64-bit dual boot
Re-installing the drivers was the first thing I tried (probably should have said that).

I did a factory reset on my computer about a week ago for an unrelated problem and that didn't fix this issue.
 

My Computer My Computer

Computer type
PC/Desktop
OS
windows 7 (64 bit)
Im having this same exact issue! I know what you are going through. I was hoping you had a fix for it. :(
 

My Computer My Computer

Computer type
PC/Desktop
OS
Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
CPU
Intel(R) Pentium(R) CPU B940 @ 2.00GHz
Motherboard
Intel Corp. Base Board Product Name
Memory
4.00 GB
Graphics Card(s)
Intel(R) HD Graphics Family
Sound Card
(1) High Definition Audio Device (2) High Definition Audio
Screen Resolution
1366 x 768 x 32 bits (4294967296 colors) @ 59 Hz
Hard Drives
(1) ST500LM012 HN-M500MBB ATA Device (2) Generic- Multi-Card USB Device
Back
Top