Solved Constant crashing BSOD, drivers failing, slow mouse during app crash

[Laith]

Run Speecy to see your temps. http://www.sevenforums.com/tutorials/306654-speccy-advanced-system-information-tool.html

 

[axe0]

Please make a screenshot of your partitions in the disk management and post it.

Please run Furmark to test your GPU, keep a keen eye on the temperature and abort the test if the temperature reaches around 85C.

Diagnostic test

 GPU TEST

Run Furmark to test your GPU. Furmark tutorial

   Note

Run Furmark for around 30 minutes

   Warning

Your GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them and abort the test if temperatures rise too high

The crash is caused by the Nvidia Video driver

*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys

1: kd> lmvm nvlddmkm
start             end                 module name
fffff880`05cc4000 fffff880`067a7000   nvlddmkm T (no symbols)           
    Loaded symbol image file: nvlddmkm.sys
    Image path: nvlddmkm.sys
    Image name: nvlddmkm.sys
    Timestamp:        [COLOR="Red"]Sat Oct 03 03:54:49 2015[/COLOR] (560F3569)
    CheckSum:         00A9E36F
    ImageSize:        00AE3000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

 

[fr3nchy]

working on the furmark benchmark next. heres the speccy log(idle)
and following the furmark tutorial to be consistent.

 

[axe0]

If any component has been overclocked revert back to stock.

Please check your BIOS for the 3.3v, 5v and 12v values, note them and post them.

 

[fr3nchy]

Ran the furmark for thirty minutes. first time i ran it, my PC BSOD again. ran it a second time and it went fine hovering around 83/84C the entire time. Does it save a log? I cant find it if it did, I made sure to check "log gpu data"
Nothing is currently overclocked. my ram sticks are all rated 1866Mhz and with dual channel 933Mhz it checks out. My cpu clock speed should be 3.70Ghz and it is.
checking the voltages like you said.
the disk mgmt screen shot is attached to this post:

 

[fr3nchy]

voltage core: 1.072
12V: +12.302
5V: +5.112
3.3V: +3.344
Looks pretty normal to me.

 

[Laith]

Check the VBAT.

 

[axe0]

Please run CPU-Z, make screenshots of the following tabs

• Mainboard,
• Memory,
• SPD,
• Graphics

and post the screenshots.

 

[fr3nchy]

Heres the screenshots axe requested including a cpuz report. Vbat? did not see that in the bios, hopefully it shows up in the cpuz
Edit: sorry it is hard to read I've got a custom theme.

 

[axe0]

So far I can read it.., it looks fine

 

[fr3nchy]

Alright. its been two weeks. and the grand majority of BSODS have dissapeared completely. I do however have a rare D1 stop error that seems to happen over time even when idle. doesnt seem related the video card or anything. in this post ive including the latest collector files. once this last BSOD error is remedied i shall mark this as solved. and perhaps up date the thread title, and original post to be a bit more clear and help for whomever experiences similar issues.

 

[axe0]

When was the last bluescreen?
According to the logs, your last bluescreen was in October?

 

[fr3nchy]

actually. Im not sure why it isnt showing the recent crashdumps? I checked the systempropertiesadvanced.exe to make sure it still making the proper dump files. everything looked okay. and the small dump directory is %SystemRoot%\Minidump that is correct for the logs right?

 

[axe0]

Is there any recent dump in the directory?

 

[fr3nchy]

no it does not have any recent crash dumps in the minidump file still only shows the minidumps that showed up in the collection. what am I doing wrong here?

 

[axe0]

Please make sure your pc is configured for small dump files How to configure minidump | Windows 7 tutorial

 

[fr3nchy]

axe did you look at the screenshot I added above? or re add it in this post. as i've gone through that tutorial several times and I believe I've set it correctly for a small dump. but for a reason i do not know it now fails to save a small dump file.

 

[axe0]

Sorry, the pics didn't load properly, now they do.

Please search

services.msc

In the services check for a service called "Windows Error Reporting Service" and make sure it is set to manual

Please open control panel and go to the following location

System > Advanced system settings (left side of the screen) >
Advanced tab > Performance settings > Advanced tab

In the advanced tab of performance settings, click on 'change', make a screenshot of it and post the screenshot.

 

[fr3nchy]

when you asked me to look at the advanced tab for the performance settings, I realized i had set up a page file partition, which i soon learned isn't much help when its all on the same drive. so I got rid of that partition and returned the virtual memory to be completely managed by the system. the D1 storport BSOD errors stopped.

however, 7F errors have reappeared prompting me to take another look at my device manager and notice two drivers not functioning properly. one is the microsoft teredo tunneling pseudo-interface which i have 'fixed' that problem by disabling it permanently and has (error code 10). no idea what it does.

my guess is the other malfunctioning driver looks like a usb controller, which i believe to be a texas instruments part. I got its driver but however windows cannot install it properly (error code 31)

meanwhile my system still doesnt save any new mini dumps since the 25th. ill include the most recent dm collector. however the BSOD crashing since then i believe appear solved to me. I've checked the startup and recovery options and followed the minidump guide on the site however it still does not work. i must be doing something wrong somewhere or i am missing something?

my questions are:
-is is how do get my minidumps working again?
-how do i make these drivers work/install properly?
here attached i have screenshots of the virtual memory dialog box, startup and recovery, and my device manager

 

[fr3nchy]

okay nevermind about the hub controller, i finally was able to find the setup application in the zip i found on the manufacturer's website. it installed correctly. now gonna wait another week/couple days to see if that was the source of the problem and have any other stop errors. but before that i need to get my system to create minidumps again first.
and completely unistalled toredo device aswell
and error reporting is currently set to auto. but was on manual this week and didnt make a difference?
also added screenshot of services msc