Solved CPU fan speed

[Dude]

I'm going to wait for Britton30 to come back, and ignore my last question. I'm going to start another thread. To me it sounds like the cooler isn't seated good. Did you apply thermal compound? Are you OCing?

 

[COMPUTIAC]

Yes, I used the compound which came with it.
No, not over clocking at all.

 

[Dude]

From your ss your temp only went up to 52C. I think we should wait for Britton30 or someone else to come in. I don't want to give you bad advice.

 

[COMPUTIAC]

I maybe wrong but, if the temps do not go over 52c, then isn't the cooler doing its job while running this test ?

or should the program be making the temps go up no matter what ?

Rerunning the test now, so far with the same results.

 

[Dude]

It would seem that it was, but the fan speeds have me wondering. Also try core temp and see what that gives you for temps.

 

[COMPUTIAC]

Do you mean core temps in CPUID ?

 

[Dude]

No I me a different program, I prefer it seems to match my bios better.

Core Temp

 

[Britton30]

I was referring to the max temp of the CPU, Intel has TJmax and Tcase, I don't think AMD specifies.
It's fine that IBT failed, many AMDs will at max settings, the two I have do the same thing.

Here's another temp monitor to try out.
Core Temp
Ooops, Dude had it.

 

[COMPUTIAC]

Here is core temp.

 

[COMPUTIAC]

How do I stand with the cooler and fan ?
All is good ? , anything to worry about ?
How doe's the shot of core temp look ?

 

[Britton30]

That's good then. Note that it shows the temp only for Core 0 though.
Did you find any fan settings in your BIOS? Was that your PC, I edited my last post.
Oh yeah, make sure the CPU fans are plugged into the CPU_FAN header.

 

[COMPUTIAC]

I saw it only showed the temp for Core 0, I can't find a setting to add the others.
The CPU fan is plugged into the same place the old fan was connected to.
Did not look in the BIOS for a setting to up the fan speed yet, should I, in your opinion, raise the speed or leave it as the temps are so far good ?

 

[Britton30]

core temp only shows Core 0 temp. From what I've seen so far you've nothing to worry about at all. You BIOS may have some pre-set threshold above which the fans RPM will increase. I think you're looking good.

 

[Dude]

Your temps seem okay, I do find it strange that coretemp only showed core 0, it did list 4 cores. Be patient we will get through this. Like Britton30 said intelburn is an extreme test so we will continue to try and find an answer for you.

 

[COMPUTIAC]

OK then, much about nothing to worry about.
Thank's so much for your time Britton30.
Thank's also to you Dude for your suggestions and time.

 

[COMPUTIAC]

Guess we were typing at the same time.
Anything else I should do you can think of ? or just keep an eye on things ?

 

[Dude]

I saw it only showed the temp for Core 0, I can't find a setting to add the others.
The CPU fan is plugged into the same place the old fan was connected to.
Did not look in the BIOS for a setting to up the fan speed yet, should I, in your opinion, raise the speed or leave it as the temps are so far good ?

Is this how your settings in coretemp are?

Never mind that doesn't fix showing all cores

 

[COMPUTIAC]

Yes, the same.

 

[Dude]

Okay, and yes your system seems fine as normal ops cause no problems. Do not worry about the burn test, that is more extreme than any normal load you could put on it. I was just trying to figure out fan control option for you.

 

[Britton30]

You can give RealTemp a go, but I don't think it reads AMDs. It shows all cores for Intel.
Real Temp 3.70
The download link is near the bottom of the page in tiny font.