Hello, FrenchFries I will see if I can help. Your dump files were all using driver verifier. Driver Verifier is designed to make the system BSOD in hopes of catching the faulty driver. These are the results of the last 5 dump files you had.
Code:
Use !analyze -v to get detailed debugging information.
BugCheck C4, {40, 0, fffff9800ab28c60, 0}
*** WARNING: Unable to verify timestamp for ndisrd.sys
*** ERROR: Module load completed but symbols could not be loaded for ndisrd.sys
[COLOR=red]Probably caused by : ndisrd.sys[/COLOR] ( ndisrd+2716 )
Followup: MachineOwner
DRIVER_VERIFIER_DETECTED_VIOLATION (c4)
A device driver attempting to corrupt the system has been caught. This is
because the driver was specified in the registry as being suspect (by the
administrator) and the kernel has enabled substantial checking of this driver.
If the driver attempts to corrupt the system, bugchecks 0xC4, 0xC1 and 0xA will
be among the most commonly seen crashes.
Arguments:
Arg1: 0000000000000040, Acquiring a spinlock at IRQL < DISPATCH_LEVEL.
Arg2: 0000000000000000, Current IRQL
Arg3: fffff9800ab28c60, Spinlock address
Arg4: 0000000000000000
ndisrd was listed in 2 of the 5 Dump files that is a Mionet driver/ or WinpkFilter high performance packet filtering framework
Also listed in 2 dumps was
Code:
Use !analyze -v to get detailed debugging information.
BugCheck C4, {f6, 34, fffffa8007093b10, fffff88005bd9430}
*** WARNING: Unable to verify timestamp for rzpmgrk.sys
*** [COLOR=red]ERROR: Module load completed but symbols could not be loaded for rzpmgrk.sys[/COLOR]
Probably caused by : rzpmgrk.sys ( rzpmgrk+1430 )
Followup: MachineOwner
That is the Razer Overlay Support Driver.
Also listed was
Code:
Use !analyze -v to get detailed debugging information.
BugCheck C9, {23e, fffff88001814324, fffff9800ad12ee0, 0}
*** WARNING: Unable to verify timestamp for GEARAspiWDM.sys
[COLOR=red]*** ERROR: Module load completed but symbols could not be loaded for GEARAspiWDM.sys[/COLOR]
*** WARNING: Unable to verify timestamp for dtsoftbus01.sys
*** ERROR: Module load completed but symbols could not be loaded for dtsoftbus01.sys
[COLOR=red]Probably caused by : dtsoftbus01.sys[/COLOR] ( dtsoftbus01+1324 )
Followup: MachineOwner
GEARAspiWDM is a CD-ROM Class Filter Driver by Gear Software.
Also comes with iTunes
dtsoftbus01 is the driver for Dameon Tools. Dameon Tools is a very well known and well documented cause of BSODs. I would recommend you uninstall it . For dameon tools, please use this method.
Daemon Tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known cause of BSOD's.
1. Uninstall Daemon Tools.
2. Download the
SPTD standalone installer and follow these steps:
- Double click the executable to open it
- Click the button shown below
If the button it is grayed out, as shown in the image, there is no more SPTD installation on your system, and you can just close the window.
For the other drivers mentioned, please try to update them to a newer version or uninstall the programs. Razor software is known to cause some people a lot of problems. I would try to update the driver and if you still have problems, uninstall the program as a test to see if that is the cause of your problems. As far as the ndisrd driver, I don't know which program you have installed, but it is obviously causing issues. The same for it. Try to update the drivers for the program or uninstall it.
Try those and see if you notice any improvement.
