Welcome to Sevenforums, hohiho
First, stop overclocking now and see if that fixes your BSOD issues.
You have a couple Drivers that are known to cause BSOD
nusb3hub.sys Thu Nov 18 20:34:24 2010 (4CE5D420)
NEC Electronics USB 3.0 Host Controller Driver (previous
BSOD issues with 2010 and earlier versions)}Try OEM first - Drivers available at the following link require registration and a lot of research:
Support/Design | Renesas Electronics
http://www.carrona.org/drivers/driver.php?id=nusb3hub.sys
nusb3xhc.sys Thu Nov 18 20:34:25 2010 (4CE5D421)
NEC Electronics USB 3.0 Host Controller Driver (previous
BSOD issues with 2010 and earlier versions)}Try OEM first - Drivers available at the following link require registration and a lot of research:
Support/Design | Renesas Electronics
http://www.carrona.org/drivers/driver.php?id=nusb3xhc.sys
LGPBTDD.sys Wed Jul 1 14:47:52 2009 (4A4BAF58)
Logitech GamePanel Software}
Logitech Support + Downloads
http://www.carrona.org/drivers/driver.php?id=LGPBTDD.sys
Remove these drivers and see if that helps.
If the above does help and you wish to continue overclocking, make a thread in the forum in the link below.
http://www.sevenforums.com/pc-custom-builds-overclocking/
If you're still having problems, lets continue
Code:
1: kd> !analyze -v; !sysinfo cpuspeed; !sysinfo SMBIOS; lmtsmn; q
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa8008062028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000b63c2000, High order 32-bits of the MCi_STATUS value.
Arg4: 00000000a7000135, Low order 32-bits of the MCi_STATUS value.
This typically points to CPU error of some sorts.
Digging deeper you could have an issue with your L1 cache
Code:
===============================================================================
Common Platform Error Record @ fffffa800818a028
-------------------------------------------------------------------------------
Record Id : 01d0c93253e5f6c4
Severity : Fatal (1)
Length : 928
Creator : Microsoft
Notify Type : Machine Check Exception
Timestamp : 7/28/2015 12:49:26 (UTC)
Flags : 0x00000000
===============================================================================
Section 0 : Processor Generic
-------------------------------------------------------------------------------
Descriptor @ fffffa800818a0a8
Section @ fffffa800818a180
Offset : 344
Length : 192
Flags : 0x00000001 Primary
Severity : Fatal
Proc. Type : x86/x64
Instr. Set : x64
Error Type : Cache error
Operation : Data Read
Flags : 0x00
Level : 1
CPU Version : 0x0000000000100fa0
Processor ID : 0x0000000000000001
===============================================================================
Section 1 : x86/x64 Processor Specific
-------------------------------------------------------------------------------
Descriptor @ fffffa800818a0f0
Section @ fffffa800818a240
Offset : 536
Length : 128
Flags : 0x00000000
Severity : Fatal
Local APIC Id : 0x0000000000000001
CPU Id : a0 0f 10 00 00 08 06 01 - 09 20 80 00 ff fb 8b 17
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
Proc. Info 0 @ fffffa800818a240
===============================================================================
Section 2 : x86/x64 MCA
-------------------------------------------------------------------------------
Descriptor @ fffffa800818a138
Section @ fffffa800818a2c0
Offset : 664
Length : 264
Flags : 0x00000000
Severity : Fatal
Error :[COLOR=Red] DCACHEL1_DRD_ERR [/COLOR](Proc 1 Bank 0)
Status : 0xf600200027000135
Address : 0x0000000131fdf1f0
Misc. : 0x0000000000000000
Make sure you remove any Motherboard utilities or software as well as any overclocking software for the time being.
Restore your BIOS to the default settings
Try testing your hardware
Hardware Diagnostics
Also another link that may be useful
http://www.sevenforums.com/bsod-help-support/32959-bsod-bugcheck-124-help-please.html
Please try everything above and report back. If your BSOD issue gets squared away and you want to attempt overclocking again, click the link above for the overclocking forum and you can get help there on how to set it up properly.
