Hi
stevin42,
Welcome to
SevenForums!
Better to go for Windows Updation before installing drivers :
https://www.chuyu.me/en/index.html
Further to
Vineet Garg suggestion above...
NOTE: The
light blue text below are links to the relevant websites and programs, just
click them!
DISM++ [Deployment Image Servicing and Management] - Basic Overview
DISM++ is a FREE implementation tool that has the ability to perform
Windows Updates [WU]. Some of the advantages [but not all] are:
[1] The GUI is
very easy to understand and use.
[2] It is
much faster than M$’s WU because it uses a different engine.
[3] It downloads the latest WU DB from the M$ servers, scans your OS, and then lists the updates available.
[4] It
doesn’t install
superseded updates like M$ does.
[5] It gives
you the option of what you want to install.
[6] The
pre-ticked updates are what is
recommended and are similar to the WU
critical and
recommended updates. The
un-ticked updates are similar to the WU
optional updates.
[7] It
warns you if an update:
- Includes telemetry.
- Has known issues with certain hardware.
- Needs exclusive access.
- Is suspect.
- Your OS doesn't need it.
- Has any other known issues.
[8] It
doesn’t require
re-booting between updates.
[9] It can be used to
either update an
install.wim image
OFFLINE, or to update the
LIVE OS.
If you decide to use DISM++, then it is best to run the DISM++ Windows updates a
couple of times to make sure you get
ALL the updates that are needed.
DON’T install
ANY of the
ORANGE updates though [see numbers [6] and [7] above]. It can also install the required
.NET Framework updates. Then just run
WU to see what other updates are available, if any.
DISM++ - Run Windows Updates On The LIVE OS
DISM++ Direct download [zip] =>
DISM++.
Here is the quick procedure guide:
[1]
Download the latest version of
DISM++ [see the DISM++ Direct download [zip] link above].
[2]
Extract the files using something like
7-Zip here =>
7-Zip.
[3] Turn
Sleep mode
OFF in
Power Options [you can turn it back on after you have finished].
[4] Double-click
Dism++x86 or
Dism++x64 and then click
Run.
[5] Click
Updates in the left-hand pane and then click
Scan [bottom right].
[6] Once the scan has completed, click
Install Updates [blue button to the right of
Scan].
[7] If any warning
pop-ups appear [see item [7] in the Basic Overview above], click
Cancel and it will skip that one. There could be several of these appear so click
Cancel to all of them.
[8] It is advisable to run the DISM++ WU a
couple of times. To do this, just
re-boot and
Scan again [from number [4] above].
[9] Run
M$ WU [Windows Update] to see if there are any other updates available.
That's it!
I hope this helps!
