Symptom:
Device is disabled.
Cause: A device is disabled preventing it from working properly.
Details: The device, ASUS 802.11n Wireless LAN Card, is disabled. If this device is no longer used it may be intentionally disabled. The Plug and Play ID for this device is PCI\VEN_1814-DEV_0781-SUBSYS_130F1043-REV_00\4-3009739E-0-0008.
Resolution: 1. Determine if you need the device.
2. If you need the device, enable it in Device Manager.
3. If you do not use the device it can be left disabled.
Symptom:
Device is disabled.
Cause: A device is disabled preventing it from working properly.
Details: The device, Floppy disk drive, is disabled. If this device is no longer used it may be intentionally disabled. The Plug and Play ID for this device is FDC\GENERIC_FLOPPY_DRIVE\5-1EBD708D-0-0.
Resolution: 1. Determine if you need the device.
2. If you need the device, enable it in Device Manager.
3. If you do not use the device it can be left disabled.
Symptom:
Device is not present, not working properly, or does not have all of its drivers installed.
Cause: A device has a configuration problem that prevents it from working properly.
Details: The device, IOCBIOS, is reporting "tv_ConfigMgrErr24". This device will not be available until the issue is resolved. The Plug and Play ID for this device is ROOT\LEGACY_IOCBIOS\0000.
Resolution: 1. Verify the correct driver is installed.
2. Try updating the drivers using Windows Update.
3. Check with the manufacturer for an updated driver.
4. Attempt to uninstall and then reinstall the device using Device Manager.
Symptom:
The Security Center has not recorded an anti-virus product.
Cause: The Security Center is unable to identify an active anti-virus application. Either there is no anti-virus product installed or it is not recognized.
Resolution: 1. Verify that an anti-virus product is installed.
2. If an anti-virus product is installed and functioning configure Security Center to stop monitoring anti-virus status.
Symptom:
The Security Center reports that User Access Control is disabled.
Cause: User Access Control is disabled. It is highly recommended that you run Windows with User Access Control enabled.
Resolution: Enable User Access Control using the Security Center.
Related: User Acess Control