Frequent and various stop errors.

[jcstrickland89]

Let me start off by saying that I custom built this computer in June with all compatible parts.
Since June, I've been experiencing crashes. Three different professionals have had my PC in shop to diagnose and fix. Each diagnosis and "fix" did not solve the issue.

It's a modest build: AMD 4300 CPU, GeForce 950, MSI board, ddr3 ram, two case fans plus the CPU fan (all functional), HDD and SSD. Windows 7 professional 64 bit OS.

The motherboard has been replaced with a brand new one, the ram had been replaced 4 times, HDD has been replaced, psu and video card have all been tested, and Windows has been clean installed several times using several instillation discs.

Not, this last fix after the HDD had been replaced seemed to work for fine for 4 days while updating Windows. Then within the past two days, I've received stop errors 0x50, 0xFE, 0x1E, and 0x1A.

I haven't ran memtest again (for the hundredth time), but I did run chkdsk, malwarbytes, scannow, and Windows diagnostic. All came back clean. All drivers are up to date, including chipset. I have one Windows update that won't update regardless of how I try. Not sure if that's related.

I'm at a loss here. If anyone might have any insight, please do assist.

Thanks,
Jonathan S.

 

[TheLovleyGuy]

Hi,

So try running memory test and tell me whats going on. Because sounds like a Ram or something problem it is . Also see this link : https://support.microsoft.com/en-us/kb/183169

 

[jcstrickland89]

Hi,

thanks for the reply. memtest86 has been ran on my RAM already, several times. No errors ever came back on memtest.

 

[TheLovleyGuy]

Hi,

So let me search on the web. Also try running MalwareBytes and see if it find a virus :huh:
If it finds a virus tell me

 

[jcstrickland89]

Malwarbytes came back clean

 

[jcstrickland89]

I have someone looking into it who says it appears to be a problem with speeds with my two sticks of ram, as well as needing to update my mobo drivers. I'll test that and get back.

 

[torchwood]

And throwing in my 2cents,
Eventlog is only showing 3 active processors, no kernel power entry for the 4th ,
and a problem with
The AODDriver4.2 service failed to start due to the following error:
The system cannot find the file specified.

As for the update error, which KB?
(you have - Technet/MSDN/Bizspark key on your comp, hope you didnt buy it on Ebay etc)
Also please ensure you have the latest firmware installed for the SSD.

Roy

 

[jcstrickland89]

I took out one stick of ram and updated my mobo drivers and it hasn't had any issues. I was made aware that I needed to remove AODdriver. As for the key, the last person to work on my computer is a Microsoft tech, he had that key activated. The KB is 3150513. I wasn't aware of the issue with the kernel power to the processor, however. Could that also be the issue I was experiencing?

 

[TheLovleyGuy]

Hi,

So try removing another memory and see if that stops and put the another one back. Maybe also making issue, Try to make some google search and give us news

 

[cutebipin]

will try

 

[TheLovleyGuy]

will try

who are you ?
are you jcstrickland89?

 

[jcstrickland89]

No, that's not me.

But anyway, with the 4gb stick out it seems to be running fine. I'll update with any changes. Thanks everyone so much.

 

[axe0]

who are you ?
are you jcstrickland89?

If you're going to say 'why are you posting in this thread', please don't. It isn't necessary

@cutebipin, please create a new thread for your problem and read BSOD Posting Instructions & How to upload files

@jcstrickland89, it seems you are running mixed memory where there are also WER's of bad dump files. This means that either dumps cannot be saved properly or they contain data we cannot use for troubleshooting.
I would recommend to get a kit of memory.

[Memory Device (Type 17) - Length 28 - Handle 0027h]
  Physical Memory Array Handle  0025h
  Memory Error Info Handle      [Not Provided]
  Total Width                   64 bits
  Data Width                    64 bits
  Size                          4096MB
  Form Factor                   09h - DIMM
  Device Set                    [None]
  Device Locator                DIMM1
  Bank Locator                  BANK0
  Memory Type                   01h - Other
  Type Detail                   0080h - Synchronous
  Speed                         1333MHz
  Manufacturer                  Corsair       
  Serial Number                         
  Asset Tag Number                          
  Part Number                   [COLOR="red"]CMX4GX3M1A1333C9  [/COLOR]
[Memory Device (Type 17) - Length 28 - Handle 0029h]
  Physical Memory Array Handle  0025h
  Memory Error Info Handle      [Not Provided]
  Total Width                   64 bits
  Data Width                    64 bits
  Size                          8192MB
  Form Factor                   09h - DIMM
  Device Set                    [None]
  Device Locator                DIMM2
  Bank Locator                  BANK1
  Memory Type                   01h - Other
  Type Detail                   0080h - Synchronous
  Speed                         1333MHz
  Manufacturer                  Manufacturer01
  Serial Number                         
  Asset Tag Number                          
  Part Number                   [COLOR="Red"]F3-1600C9-8GXM0000[/COLOR]

 

[jcstrickland89]

Thank you very much for that information. I removed one stick of RAM yesterday evening so as to not have mixed RAM. Since then it's seemed to have flawlessly. If I experience anymore issues I'll be sure to update you all and try to move onto the next step. Thank you all very much for your responses and willingness to help

 

[TheLovleyGuy]

Hi,

I am happy to see that we all helped you , i hope your problem is solved

 

[jcstrickland89]

Okay guys, so the past three days I've gotten the same stop error, System Service Exception, one time all three days right after start up. After the reboot, however, my PC ran fine all throughout the day. new dumps below:

 

[axe0]

Diagnostic Test

 DRIVER VERIFIER

   Warning

Please make a backup of your important files and get your rescue media or create one.
Please create a restore point.

Please follow this tutorial to run driver verifier.

Driver verifier stresses your drivers and will crash your pc if any driver fails due to a violation.

Driver verifier should be performed for a max of 48 hours, or when you have a bluescreen, whatever comes first.

If driver verifier has found a violation and you can't get back into windows normally, try to boot into safe mode and reset in safe mode driver verifier, or in the troubleshooting options open command prompt and type verifier /reset.

   Note

Your system will act very sluggishly while driver verifier is enabled, this is normal as your drivers will be being subjected to heavy testing in order to make them crash.