Frequent BSOD with BCCode 109

[karmakar13]

I have a Windows 7 x64 OS, and it keeps crashing recently with a bluescreen, the following information is shown on startup ..
Problem Signature
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 16303
Additional information about the problem:
BCCode: 109
BCP1: A3A039D89A5D081B
BCP2: 0000000000000000
BCP3: 348D6F087DB64051
BCP4: 0000000000000101
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1
My system specs are as follows
CPU: Intel Core 2 Duo E4300
RAM: 2GB DDR3 1333 EVM + 4GB DDR3 1333 Corsair
Graphics: NVidia Geforce 210 1GB
Harddisk: Seagate Barracuda 500GB
SMPS: Frontech 400 watts
Motherboard: Biostar G41D3C
I am at my wits end with this problem, PLEASE advise how to fix it ....
P.S.: I have attached the info file retrieved by the SF Diagnostic Tool ..

 

[Arc]

Welcome aboard, Karmakar. From Bengal I guess?

You are getting a Stop 0x109 error, which may be caused either a device driver, or by a faulty RAM. But, your dumps does not give a trace of any driver faulting there. Before blaming the RAM, let us be sure that no device driver is causing it actually.

In such a situation, it is better to enable Driver Verifier to monitor the drivers.

Driver Verifier - Enable and Disable

Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

Let us know the results, with the subsequent crash dumps, if any.

 

[karmakar13]

Thanks a lot.. will do what you said immediately. and I am from Bengal ..
I forgot to mention earlier that my system is missing the system beeps on start up..

 

[Arc]

I am from Bengal ..

Me too!

That beep may be disabled in BIOS.

Inform us at the first crash after verifier is enabled, with the crash dumps.

 

[karmakar13]

This is the information after the first crash given in the attachment..

 

[Arc]

So, it is Atheros NIC driver.

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

[COLOR=Red]BugCheck D1[/COLOR], {fffff98021542f50, 2, 0, fffff8800437dc6a}

Unable to load image \SystemRoot\system32\DRIVERS\L1C62x64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for L1C62x64.sys
*** ERROR: Module load completed but symbols could not be loaded for L1C62x64.sys
[COLOR=Red]Probably caused by : L1C62x64.sys [/COLOR]( L1C62x64+5c6a )

Followup: MachineOwner
---------

And, it is somehow old.

1: kd> lmvm L1C62x64
start             end                 module name
fffff880`04378000 fffff880`0438d000   L1C62x64 T (no symbols)           
    Loaded symbol image file: L1C62x64.sys
    Image path: \SystemRoot\system32\DRIVERS\L1C62x64.sys
    [COLOR=Red]Image name: L1C62x64.sys
    Timestamp:        Mon Sep 27 12:06:23 2010[/COLOR] (4CA03B67)
    CheckSum:         0002220E
    ImageSize:        00015000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

Update the driver, you will get it in ATHEROS drivers for Microsoft Windows (Atheros?????)

Disable verifier for now. After doing the update, observe the system. If it crashes again, inform us with the dumps. We may suggest you to enable verifier again.

 

[karmakar13]

Thanks a ton .. I'l do that immediately ..

 

[karmakar13]

I tried to update the driver but they don't have any latest version of it there.. Is there anything else which can cause the crashes.. the only parts of my pc which are really old are the smps and the cpu.. is there any way to find out if there's anything wrong with them ??

 

[Arc]

That driver is causing the problem, either you have to update it, or you have to disable it.