Getting BSOD 0x0000003b(most common), 0x0000001e, 0x000000a,0x0000007e

[akashruhil]

hey,
i m getting BSOD when the laptop starts and just after the start. Also, i get BSOD every time when i try to restart my laptop. The most common BSOD is
1. 0x0000003b (SYSYTEM_SERVICE_EXCEPTION) - 14 times

The other BSOD are :
1. 0x000000d1 (DRIVER_IRQL_NOT_LESS_OR_EQUAL) - 3 times
2. 0x0000001e (KMODE_EXCEPTION_NOT_HANDLED) - 3 times
3. 0x000000a (IRQL_NOT_LESS_OR_EQUAL) - 4 times
4. 0x0000007e ( SYTEM_THREAD_EXCEPTION_NOT_HANDLED) - 3 times
5. 0x000000019 ( BAD_POOL_HEADER) - 3 times
6. 0x00000050 ( PAGE_FAULT_IN_NONPAGED_AREA) - 1 time
7. 0x00000024 (NTFS_FILE_SYSTEM) - 1 time
I have recently upgraded my RAM from existing 3gb to 6gb. I removed the 1gb ram and putted the NEW TRANSCEND RAM IN SLOT 1 and 2gb HYNIX RAM in slot 2.
I have also RAN the MEMTEST86 3-4 times with no error. The BSOD usually occurs after each 1 week and 3-4 times a day. Also, the timings of both the RAMS are same. I am using 1333 mhz ram on my 1066 system. I m NOT OVERCLOCKING ANYTHING. The picture i have submitted is with 4 gb NEW RAM only.
OPERATING SYSTEM - WINDOW 7 ulitmate 64 bit
PROCESSOR - intel i 3 m350
I have uploaded the minidump files date wise . PLS HELP ME !!!!!!

 

[HonorGamer]

Follow the http://www.sevenforums.com/crashes-debugging/96879-blue-screen-death-bsod-posting-instructions.html so we can get all of the crash files at once and better determine the problem.

-Justin

 

[akashruhil]

THanx for QUICK REPLY. But when RUN the SF Diag Tool v4 then an error message is displayed saying UNHANDLED EXCEPTION HAS OCCURED IN YOUR APPLICATION. ..................... Could not find C:\RunInfoCurrent.txt
IF I PROCEED FURTHER THEN NOTHING HAPPENS, NONE OF THE BUTTONS OF THIS APPLICATION WORKS. PLS PLS PLS HELP ME

 

[akashruhil]

Hey, after reading your link completely . HERE IS THE SEVEN FORUM ATTACHMENT

 

[akashruhil]

Help, getting no reply !!!!!!!!!!!!!!!!!!!!!!!!!!

 

[HonorGamer]

I highly apologize for this late reply. I must of looked over the thread.

sptd.sys Sun Oct 11 15:55:14 2009 (4AD24632)

this driver is associated with the program Daemon Tools. Which are known to cause problems such as BSODs. Please uninstall.

Also shows you do not have SP1 installed. Try doing that through Windows Update. Make sure to include all updates.

Afterwards please post back results.

-Justin

 

[akashruhil]

Hey, thanx for the reply. I don't have DAEMON TOOL installed . Also, i don't use any virtual drive software or image mounting software. Between these days, i got 2 more BSOD
1. 0x00000024 ( NTFS_FILE_SYSTEM)
2. 0x0000001e (KMODE_EXCEPTION_NOT_HANDLED)
I only got BSOD when the system restarts or just after it starts, when I try open any folder or do anything.
I have attached the two new BSOD dump files