Getting several BSOD randomly

[azinod]

I had energy problems at home that caused my PC to shutdown 3 or 4 times because energy was cut for couple seconds. When I managed to turn it on and use it, there were some problems that made me restore a backup from a couple days ago. That solved the problem I got, however now I am getting several BSOD errors for no aparent reason, since this never happened to this PC specifically.

I tried to use the SF Diagnostic tool to get you the correct files, but all options failed. So, I ziped the mnidump folder and uploaded. I hope that serves for diagnostic.

 

[Arc]

Hi azinod.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

If memtest86+ is free from errors, enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

   Information

Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.

   Warning

Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.

   Tip

• If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
• If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.

Let us know the results, with the subsequent crash dumps, if any. Post it following the Blue Screen of Death (BSOD) Posting Instructions.
_____________________________________________________________________________________

[COLOR=Red]BugCheck 50[/COLOR], {fffff8a00996b570, 0, fffff800037f6138, 0}


Could not read faulting driver name
Probably caused by : ntkrnlmp.exe ( nt!ExAllocatePoolWithTag+528 )

Followup: MachineOwner
---------------------------------------------------------------------------
[COLOR=Red]BugCheck 4E[/COLOR], {99, 1d23cc, 4, 1}

Probably caused by : memory_corruption ( nt!MiBadShareCount+4c )

Followup: MachineOwner
---------------------------------------------------------------------------
[COLOR=Red]BugCheck 1A[/COLOR], {41284, fffff98008222001, 926, fffff780c0000000}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+4ad3 )

Followup: MachineOwner
---------------------------------------------------------------------------
[COLOR=Red]BugCheck 3B[/COLOR], {c0000005, fffff8000367eec5, fffff8800a566870, 0}

Probably caused by : ntkrnlmp.exe ( nt!ExpInterlockedPopEntrySListFault16+0 )

Followup: MachineOwner
---------