Half-Life 2

Johnnymushio

New member
Local time
2:46 PM
Messages
3
I did not have these problems on Vista.

1. When I run steam, i open half-life 2 (its the only game atm that I installed).
I see a black screen where the VALVE and SOURCE logo should be. I also hear the sound that plays as the logos are shown, but I only see black. I see no creepy valve logo guy.

2. After that, the game starts and the aspect ratio is kept. i see black bars on the left and right of my widescreen monitor and I hate it. I do not want to change my resolution higher, I want to keep it 1024 x 768 and stretch it to the sides of the screens. The game runs smoother the lower the resolution. Thats how it was in Vista.
 

My Computer

OS
Windows 7
In the game, you have to choose a resolution with the same aspect ratio as your screen is. If you can't do that in the game, you're out of luck unless you want to somehow distort the screen so a square appears as a rectangle; not good.


http://www.vistax64.com/
 

My Computer

Computer Manufacturer/Model Number
self built
OS
7600.20510 x86
CPU
P4 550 3.4 GHz HT running at 3.5 GHz
Motherboard
MSI PM8M3-V (MS-7211 v1.x) Micro-ATX mainboard
Memory
OCZ 2 GB(2x1GB) DDR400mHz running @ 414 mHz
Graphics Card(s)
HIS Radeon HD 3850 IceQ 3 Turbo HDMI Dual DL-DVI AGP
Sound Card
MOTU Traveler firewire studio interface 192 kHz 24 bit
Monitor(s) Displays
22" widescreen Acer X223W LCD, 17" Compaq P75 CRT
Screen Resolution
1680x1050 and 1280x1024
Hard Drives
SATA I x2 WD, 400 GB and 120 GB, SATA 2 WD Caviar Black 1 TB
PSU
350W generic
Case
Cybertronpc, it glows blue
Cooling
stock cpu fan, Ice-Q 3 gpu and system, many case fans
Keyboard
Logitch Classical Keyboard 200
Mouse
Logitech Mediaplay cordless
Internet Speed
1792/448 kbits/sec
Other Info
SATA II PCI fake RAID adapter, 1 GB Readyboost, original ATI Remote Wonder (even works with WMC perfectly), Logitech Rumblepad 2 game controller x2
Hi Johnnymushio,

You've not said what size your monitor is, so your question is kind of hard to answer. However, I have a 22" LCD monitor with a native resolution of 1680x1050 and an apect ration of 6:10. As a test I was able to set Half-Life 2's resolution at 1024x768 and play the game in full screen (without black bars anywhere). I myself play the game at my native resolution (1680x1050) and have never had a problem.

Bottom line is you can play at that resolution in full screen without issue provided your monitor supports that resolution. If you're having issues, you might want to check your video drivers as this game plays in full screen whatever the resolution.

Also, in the in-game settings under video, make sure you set the "Aspect Ratio" to 4:3 if you're going to play at 1024x768 - that might be your problem.

If you continue to have issues with the game you may need to reinstall steam.

Hope this helps.
 

My Computer

Computer type
PC/Desktop
Computer Manufacturer/Model Number
Custom built by me.
OS
Windows 10 Pro
CPU
Intel Core i7-4770K (3.5Ghz)
Motherboard
Gigabyte G1 Sniper 5 (F10 Bios)
Memory
32 gig Corsair Dominator Platinum (4x8Gig)
Graphics Card(s)
Sapphire Tri-X R9 Fury
Sound Card
Soundblaster ZXR
Monitor(s) Displays
NEC PA242W 24" LCD Monitor
Screen Resolution
1920 x 1200
Hard Drives
Primary - Samsung 850 Pro (512gig), Samsung 840 Pro (256gig), 2TB WD Caviar Black.
PSU
EVGA Supernova 1000 G2
Case
Cooler Master HAF X
Cooling
Corsair H100i with Corsair Air Series SP120 Quiet Fans
Keyboard
Logitech Wireless Wave
Mouse
Logitech Performance MX
Internet Speed
High Speed Cable
Antivirus
Norton Security
Browser
IE11
Other Info
Memory Timings - 1866MHz @ 9-9-9-27-1T @ 1.5 volts
Back
Top