Hard Drive diagnostics report bad sectors

oddrobb

New member
Local time
9:41 AM
Messages
14
Hello,

I am having serious corruption problems with my hard drive. I have reinstalled windows a few times now, but it always ends up being unable to boot. At the moment, my computer cannot even boot up in normal or safe mode, all my restore points have been deleted, and startup repair cannot do anything.

After backing up my data and running a test with the Seagate SeaTools diagnostics in DOS, it was reported that there were bad sectors found on my Hard Disk. But I actually can't use this software to repair the bad sectors tough since it's a Western Digital drive. Is there any software that I could download to repair these bad sectors, or am I going to have to replace the whole drive? Thanks.

Windows 7 Professional 64-bit
4Gb Ram
AMD Phenom X II @ 3.7Ghz
2 x ATI HD 6870 in crossfire
1 TB HDD at 7200rpm
 

My Computer My Computer

OS
Windows 7 Professional x64
If you have used SeaTools, and the drive cannot be repaired by it, you will need to purchase a new drive. If you need to get data from this drive, it is POSSIBLE to use Knoppix (free) to view data and copy it.
 

My Computer My Computer

Computer Manufacturer/Model Number
Dell and Custom
OS
Systems 1 and 2: Windows 7 Enterprise x64, Win 8 Developer
CPU
System 1: i7 [email protected], System 2: AMD FX-4100 Zambezi 3.6G
Motherboard
System 1:Dell 06NWYK System 2: ASUS M5A97 AM3+
Memory
System 1: 8GB System 2: 8GB
Graphics Card(s)
System 1: ATI FirePro V4800 System 2: Radeon HD 6850
Sound Card
System 1: onboard System 2: onboard
Monitor(s) Displays
System1: Viewsonic HDMI 24"
Screen Resolution
System 1: 1920x1080 System 2: 1920x1080
Hard Drives
System 1: Mirrored .5B drives System 2: Seagate Barracuda ST1000DM003 1TB 7200 RPM 64MB Cache SATA 6.0Gb/s
Case
System 1: Dell System 2: Cooler Master
Internet Speed
10 MBPS
Bad Sectors

Hello,

I am having serious corruption problems with my hard drive. I have reinstalled windows a few times now, but it always ends up being unable to boot. At the moment, my computer cannot even boot up in normal or safe mode, all my restore points have been deleted, and startup repair cannot do anything.

After backing up my data and running a test with the Seagate SeaTools diagnostics in DOS, it was reported that there were bad sectors found on my Hard Disk. But I actually can't use this software to repair the bad sectors tough since it's a Western Digital drive. Is there any software that I could download to repair these bad sectors, or am I going to have to replace the whole drive? Thanks.

Windows 7 Professional 64-bit
4Gb Ram
AMD Phenom X II @ 3.7Ghz
2 x ATI HD 6870 in crossfire
1 TB HDD at 7200rpm

If you have another PC go online to >>HERE<< and get WD Lifeguard diagnostics for DOS. They also have other tools that may help.
 

My Computer My Computer

Computer Manufacturer/Model Number
Antec/custom
OS
Windows 7 Professional x64
CPU
Sempron 145 2.8Ghz(Unlocked to an Athlon II x2 4450e 3.4Ghz)
Motherboard
ASRock 880gm-le
Memory
8GB Corsair Vengeance LP 1600Mhz
Graphics Card(s)
EVGA Geforce GTX 280
Sound Card
Creative
Monitor(s) Displays
Envision 22", Dell 17"
Screen Resolution
1680x1050, 1280x1024
Hard Drives
WDC WD1200BEVS-75LAT0 2.5inch 120GB
WDC WD5000AAKS-00V2B0 3.5inch 500GB
PSU
Cooler Master 750w
Case
Antec
Cooling
Air
Keyboard
MS 1000
Mouse
MS wireless 2000
Internet Speed
15 Mbps down, 4.7 Mbps up
I would possibly be looking at a new HDD for my main drive. But given the cost of HDDs you may be able to use it for other purposes if the bad sectors are stable.

For WD try WD Lifeguard
http://support.wdc.com/product/download.asp?groupid=113&sid=3〈=en
From a Windows 7 system repair DVD/CD
Run Chkdsk /f /r from a command prompt
Chkdsk
Then use CrystalDiskInfo to monitor bad sectors over time. I would say one or more a month - dump the HDD. PS: pulled that figure out of thin air - but it would make me uneasy.
 
Last edited:

My Computer My Computer

Computer type
PC/Desktop
Computer Manufacturer/Model Number
Own build
OS
Windows 7x64 Home Premium SP1
CPU
Intel i7 2600k
Motherboard
ASUS P8Z68 Deluxe
Memory
G.Skill Ripjaws (DDR3-1600) 2x4GB
Graphics Card(s)
Nvidia GeForce GTS 450; Intel HD Graphics 3000(GT2+)
Monitor(s) Displays
Dell Ultrasharp IPS panel U2311H, Samsung SyncMaster P2350
Screen Resolution
1920x1080
Hard Drives
Samsung 850 Pro SSD 256GB, Samsung SSD 840 120GB, Seagates 1TB Barracuda ST31000528AS x2
PSU
Seasonic M12II 520W
Case
Lian Li Lancool PC-K60
Cooling
Case: 1x120mm, 3x140mm CPU: Hyper 212+
Keyboard
Logitech MK520 (wireless)
Mouse
Logitech MK520
Internet Speed
6-7 Mbps
Antivirus
Norton Security Premium, Malwarebytes on 2 (MSE on 3rd PC)
Browser
FireFox
Other Info
Audio: Logitech Z523 2.1
My understanding is that new HDDs can have bad sectors mapped out. I may be wrong here.
If you don't get another bad sector in say a 12 month period I'm not so sure dumping the HDD is needed.

An easy way to keep tabs on things - In CrystalDiskInfo you go
Function > Health Status Setting
then set Reallocated sector count to say 1 more than it is now. If you keep getting frequent Health Status warnings the HDD is clearly on the way out.
 

My Computer My Computer

Computer type
PC/Desktop
Computer Manufacturer/Model Number
Own build
OS
Windows 7x64 Home Premium SP1
CPU
Intel i7 2600k
Motherboard
ASUS P8Z68 Deluxe
Memory
G.Skill Ripjaws (DDR3-1600) 2x4GB
Graphics Card(s)
Nvidia GeForce GTS 450; Intel HD Graphics 3000(GT2+)
Monitor(s) Displays
Dell Ultrasharp IPS panel U2311H, Samsung SyncMaster P2350
Screen Resolution
1920x1080
Hard Drives
Samsung 850 Pro SSD 256GB, Samsung SSD 840 120GB, Seagates 1TB Barracuda ST31000528AS x2
PSU
Seasonic M12II 520W
Case
Lian Li Lancool PC-K60
Cooling
Case: 1x120mm, 3x140mm CPU: Hyper 212+
Keyboard
Logitech MK520 (wireless)
Mouse
Logitech MK520
Internet Speed
6-7 Mbps
Antivirus
Norton Security Premium, Malwarebytes on 2 (MSE on 3rd PC)
Browser
FireFox
Other Info
Audio: Logitech Z523 2.1
Back
Top