Solved HDD not there after re-boot

[ICIT2LOL]

Thanks for the info. It is helpful.

This is a recurring issue that has a bit of mystery to it: "how does W7 identify and catalog hard disk drives?". We have seen similar problems to yours in the case of cloning drives, and I believe that a factory restore is basically the same thing.

Hopefully your problem is solved and it was just a connectivity issue. But if not, I can link you to a past thread with a more 'involved' solution.

Well, I just booted up (after a good night's sleep) and all is as it should be. I'm thinking it may very well be a connectivity issue. Jury's still out...

Not in Toshiba's TV the factory "default" is housed in a separate partition it might not have been copied exactly and anyway it will be full of Toshiba crapware. I always replaced the HDD with an SSD and stuck an OEM in - end of a lot of Toshiba problems and issues and the old drive just use for data.
Still I said I would not interfere so I had better go.

I have a full Windows 7 license that I used at first for a bare bones install. However, Windows could not, nor could I, find all the drivers necessary to make this machine 100%. That's why I did a factory install from the recovery discs. As for Toshiba's crap ware, I will uninstall it just like I always do.

One last query did you have just that one drive in when you tried the fresh install because if the other drive was installed it could have been throwing a spanner in the works. Just thought as I know an install onto an already installed disk can hold the "old" Windows install, and maybe the old stuff was finding it's way back to the new install drive. Again just a thought.

Just for info on Toshibas this you may know anyway (no sarcasm intended) when you go looking for drivers parts etc etc you need to quote the PART NO as well as the model number because that denotes the place / region of manufacture and the region it is meant for. See my pic

 

[bug67]

One last query did you have just that one drive in when you tried the fresh install because if the other drive was installed it could have been throwing a spanner in the works. Just thought as I know an install onto an already installed disk can hold the "old" Windows install, and maybe the old stuff was finding it's way back to the new install drive. Again just a thought.

Yes, just the one, brand new from Amazon and freshly formatted SSD. There was no "old" Windows instal. 2nd drive was not in the machine.

Just for info on Toshibas this you may know anyway (no sarcasm intended) when you go looking for drivers parts etc etc you need to quote the PART NO as well as the model number because that denotes the place / region of manufacture and the region it is meant for. See my pic

Yes, I put that number in. There were some drivers but not all. For instance, I could not for the life of me find the LAN driver.

 

[ICIT2LOL]

Now perhaps a stupid suggestion how about changing the LAN card for an after market one if there is such a thing and get the driver for it as I watched th other stuff and the Bloat on that machine is well beyond a joke and it seems to me they have it set up for only Toshiba installed gear ie that ruddy config set up.

Now I know my car is under the KB and I have looked though the irisvista list but it doesn't list that model however usually I have found anyway is that Toshiba models reasonably close together are never that much different usually cosmetic and a few more specs.

So went looking and came up with these videos.

I know the probability is small of getting a card but if one doesn't ask one never knows eh?


http://www.youtube.com/watch?v=z19kc5fERsE

http://www.youtube.com/watch?v=WVJHbvBoIkg

 

[bug67]

"...This could be due to a connection problem (try re-seating the drives)..."

Sometimes the simplest things are the solution. After re-seating the drive, I have re-booted and woke from sleep several times and all appears to be well. As such, I am marking as solved for now. Nice to have all this extra space now!

 

[Britton30]

Good to hear it was a simple fix Dave.

 

[ICIT2LOL]

Would be interesting to know how it became unseated - dropped perhaps - still it's fixed.

 

[Britton30]

I figure it was during the drive swap and it worked loose.

 

[bug67]

I figure it was during the drive swap and it worked loose.

Probably this or it was never really seated well in the first place.

 

[ICIT2LOL]

I figure it was during the drive swap and it worked loose.

Probably this or it was never really seated well in the first place.

Hum suppose it could have even been some heavy keyboard use - it is the model that has it under the KB isn't it? They are pretty flimsy things really.

 

[bug67]

Naw, It's because I was using it to play frisbee golf. :roflmao:

 

[ICIT2LOL]

Naw, It's because I was using it to play frisbee golf. :roflmao:

He he betcha thought it was Wii control and it slipped out of your hand went through a window fell four stories to the pavement and......:roflmao:

 

[bug67]

Yep! I forgot to "secure the wrist strap!"

 

[ICIT2LOL]

Yep! I forgot to "secure the wrist strap!"

:roflmao:Hey the bike - yours or on wish list??

 

[bug67]

It's mine. Er, was. I traded it for the new Triumph Trophy SE that I'll be riding this summer. I also have a Triumph Street Triple R in the stable.

 

[ICIT2LOL]

It's mine. Er, was. I traded it for the new Triumph Trophy SE that I'll be riding this summer. I also have a Triumph Street Triple R in the stable.

Hum nice always liked the Trumpies especially that '68 T120R 650 Bonneville sound wise Harleys eat yer heart out

My last - had to sell smashed the shoulder gold prospecting so cannot hang onto the bars anymore in pic

'98 1100cc Yammy Virago Special modded out by the original owner all I added was new proper top box (not in pic) bar warmers and a battery condition indicator I made up myself.