I know it`s just memory...

[AddRAM]

It does.

 

[AddRAM]

I ran the drivers disc and it found the software, all is well.

Time to run WEI, so heerrrrreeeee we go !!! And Here`s what we got. The 660 or 660 Ti will bring up the graphics and when I start overclocking the cpu, that score will come up. But it`s runnin great and cpu temps look awesome.

I don't understand why your CPU scores so low it should be at a 7.8

Even at 4.2 GHZ it still only gets a 7.7

 

[kbrady1979]

Mine is at 4.5GHz and gets a 7.7. You won't get any higher without some massive OC. I was under the impression the 3570K couldn't get higher than a 7.7......but I guess that's not right.

 

[AddRAM]

I have to figure out this OC genie, it`s kind of a pain in the ass to work with. I can change things but I can`t apply the changes to the OC, I will have to keep messin with it, I have a video on how to work with it, I`ll have to watch it tomorrow.

You can use the one touch genie to put it at 4.2, but then it doesn`t clock down and it just sits there at 4.2.

 

[AddRAM]

And how are these read write scores ?

 

[Britton30]

Good read/write and access scores. The may be better id you install the SSD to an Intel SATA port so it can use the iaStor controller.

 

[AddRAM]

Connect your SSD to the native SATA 6Gb/s ports sata 1 & 2 to unleash extreme performance. That`s exactly what the label over the ports said and that`s exactly where I hooked up the ssd. Ugh, this is makin me crazy.

 

[ICIT2LOL]

Good read/write and access scores. The may be better id you install the SSD to an Intel SATA port so it can use the iaStor controller.

Don't quite get the gist of that Gary I am or have missed something along the way - the SATA ports and I am a bit dumb with this I thought were just the board ones? or are they dedicated Intel ones on the board?

 

[Britton30]

John, our boards have SATA ports that have different controllers, hence the different colors. Usually 2 on Intel, 2 on Marvell and 4 on JMicron. Other boards may also use ASmedia ones as well. The Intel ports in our case are the white ones.

Sorry, you have Asmedia and Intel only John. AddRAM's will be different.

 

[kbrady1979]

The Intel Rapid Storage Technology driver is needed as well.

 

[AddRAM]

I installed the chipset driver right off the cd and even updated it.

 

[Britton30]

The Intel Rapid Storage Technology driver is needed as well.

Yeah, good point Kelly.

 

[ICIT2LOL]

John, our boards have SATA ports that have different controllers, hence the different colors. Usually 2 on Intel, 2 on Marvell and 4 on JMicron. Other boards may also use ASmedia ones as well. The Intel ports in our case are the white ones.

Talk about dumb I never gave it a thought to be honest I just though the different colours were for 3 and 6 Gbs or stuff like that.

I had better check mine out tomorrow as I think the whites I wired to the front docks or maybe the optical as my SSD has been slow compared to everyone else's boot times like I think the last time I measured it that was about 30 seconds or maybe more.

Thanks for the heads up mate I learn something new every day.

 

[Britton30]

Be sure to have a look in your board manual, Motherboard Layout section. I added a snip of the page.

AddRAM does yours have a similar page?

 

[ICIT2LOL]

The Intel Rapid Storage Technology driver is needed as well.

Yeah, good point Kelly.

Yeah Kelly thanks to you too I must check out that out too.

 

[AddRAM]

I`m connected to the whites, that`s what it says to use. #1 and #2. 3 4 5 and 6 are 3 Gb/s

 

[RoasterMen]

I only have a Kingston ram installed on my pc aw

 

[kbrady1979]

I`m connected to the whites, that`s what it says to use. #1 and #2. 3 4 5 and 6 are 3 Gb/s

What motherboard is that exactly?

 

[AddRAM]

The MSI Z77A-G45

http://us.msi.com/product/mb/Z77A-G45.html

http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=2332609&CatId=6976

 

[ICIT2LOL]

I`m connected to the whites, that`s what it says to use. #1 and #2. 3 4 5 and 6 are 3 Gb/s

What motherboard is that exactly?

OOPs wrong post