Keep getting BSOD, when laptop shutsdown or hibernates?

T

Tasemach

New member
Local time
11:09 PM
Messages
1
Hello,

I recently had to reinstall Windows 7 and I did so after completely reformatting my hard drive. It was a clean install, with no other startup HP software. However, now sometimes my computer will crash when I close the laptop, or if it runs out of battery and trys to hibernate. I have been reading other posts, and it seems that hardware drivers tend to create these problems. When I reinstalled, I thought I updated all of the drivers to the most recent driver, but I could be wrong. Can anyone please help me with this? It woudl be most appreciated I have attached to the two files.

Best Regards,

Dustin

Also here is windows information:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033
Additional information about the problem:
BCCode: 9f
BCP1: 00000003
BCP2: 85EA0B60
BCP3: 82B32AE0
BCP4: 854FBCD8
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1
Files that help describe the problem:
C:\Windows\Minidump\032210-19858-01.dmp
C:\Users\Dustin John Semach\AppData\Local\Temp\WER-31683-0.sysdata.xml
Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
 

My Computer My Computer

Computer Manufacturer/Model Number
HP
OS
Windows 7
CPU
Core 2 Duo P8600 @ 2.4 GHZ
Memory
3 GB
Graphics Card(s)
Nvidia 9200M GS
Tasemach said:
Hello,

I recently had to reinstall Windows 7 and I did so after completely reformatting my hard drive. It was a clean install, with no other startup HP software. However, now sometimes my computer will crash when I close the laptop, or if it runs out of battery and trys to hibernate. I have been reading other posts, and it seems that hardware drivers tend to create these problems. When I reinstalled, I thought I updated all of the drivers to the most recent driver, but I could be wrong. Can anyone please help me with this? It woudl be most appreciated I have attached to the two files.

Best Regards,

Dustin

Also here is windows information:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033
Additional information about the problem:
BCCode: 9f
BCP1: 00000003
BCP2: 85EA0B60
BCP3: 82B32AE0
BCP4: 854FBCD8
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1
Files that help describe the problem:
C:\Windows\Minidump\032210-19858-01.dmp
C:\Users\Dustin John Semach\AppData\Local\Temp\WER-31683-0.sysdata.xml
Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
Click to expand...

Dustin;


The Windows Debugging Tools aren't able to access symbols for your operating system files (in particular NTOSKRNL.EXE / NTKRNLMP.EXE / NTKRNLPA.EXE / NTKRPAMP.EXE) from the Microsoft Symbol Server - so that makes debugging them difficult if not impossible.

Please do the following:
- activate/validate the Windows installation at Genuine Microsoft Software
- run sfc.exe /scannow to replace any problem files
- open a support incident with Microsoft to see if they can fix the missing symbols issue ( Windows 7 Solution Center )
- If that doesn't fix it, then wipe the hard drive and reinstall Windows
- don't use "leaked"/torrent builds

Let me know if you need help with any of this

Ken



Code: 
Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\K\Desktop\032210-19858-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?ffffffff`82b32ad4?
Symbol search path is: SRV*F:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is: 
Unable to load image \SystemRoot\system32\ntkrnlpa.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Windows 7 Kernel Version 7600 MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16481.x86fre.win7_gdr.091207-1941
Machine Name:
Kernel base = 0x82a0c000 PsLoadedModuleList = 0x82b54810
Debug session time: Mon Mar 22 01:13:23.707 2010 (GMT-4)
System Uptime: 0 days 5:00:08.455
Unable to load image \SystemRoot\system32\ntkrnlpa.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Loading Kernel Symbols
...............................................................
................................................................
..................................
Loading User Symbols
Loading unloaded module list
.........
0: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

DRIVER_POWER_STATE_FAILURE (9f)
A driver is causing an inconsistent power state.
Arguments:
Arg1: 00000003, A device object has been blocking an Irp for too long a time
Arg2: 85ea0b60, Physical Device Object of the stack
Arg3: 82b32ae0, Functional Device Object of the stack
Arg4: 854fbcd8, The blocked IRP

Debugging Details:
------------------

***** Kernel symbols are WRONG. Please fix symbols to do analysis.

*************************************************************************
***                                                                   ***
***                                                                   ***
***    Your debugger is not using the correct symbols                 ***
***                                                                   ***
***    In order for this command to work properly, your symbol path   ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_IRP                                       ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Your debugger is not using the correct symbols                 ***
***                                                                   ***
***    In order for this command to work properly, your symbol path   ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_IRP                                       ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Your debugger is not using the correct symbols                 ***
***                                                                   ***
***    In order for this command to work properly, your symbol path   ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Your debugger is not using the correct symbols                 ***
***                                                                   ***
***    In order for this command to work properly, your symbol path   ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!KPRCB                                      ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Your debugger is not using the correct symbols                 ***
***                                                                   ***
***    In order for this command to work properly, your symbol path   ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Your debugger is not using the correct symbols                 ***
***                                                                   ***
***    In order for this command to work properly, your symbol path   ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!KPRCB                                      ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Your debugger is not using the correct symbols                 ***
***                                                                   ***
***    In order for this command to work properly, your symbol path   ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Your debugger is not using the correct symbols                 ***
***                                                                   ***
***    In order for this command to work properly, your symbol path   ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Your debugger is not using the correct symbols                 ***
***                                                                   ***
***    In order for this command to work properly, your symbol path   ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_IRP                                       ***
***                                                                   ***
*************************************************************************
 

My Computer My Computer

Computer Manufacturer/Model Number
HP Pavillion dv-7 1005 Tx
OS
Win 8 Release candidate 8400
CPU
[email protected]
Memory
4 gigs
Graphics Card(s)
Nvidia 9600M
Sound Card
HD built-in
Monitor(s) Displays
17" Wxga
Screen Resolution
1440x900
Cooling
none
Internet Speed
45Mb down 5Mb up
You must log in or register to reply here.

Similar threads

Keep getting BSOD when computer start
Replies
9
Views
2K
Arc
Arc
BSOD when laptop hibernates or sleeps
Replies
1
Views
3K
libertyfx3
L
Back
Top