Manny BSOD's. Please help me.

[mariusdaw]

Please help me with my bsod crash
I make a zip with SF Diagnostic Tool and i put in attchament.
I'm romanian and do not speak english very good and i apologize for my mistake's gramaticals.

Components:

• CPU: AMD FX X6 6300, 3500MHz, 14MB, socket AM3+
• Motherboard: ASROCK 970 pro3 R2.0
• GPU: Asus Ati Radeon HD 5450, 1024MB, GDDR3, 64bit, DVI, HDMI, PCI-E
• Memorii: Kingston 4GB 1600MHz DDR3 Non-ECC CL9 DIMM HyperX Blu
• Sursa: Super Flower SF-550K12XP, 550W, Modulara, PFC Activ
• HDD: WD 160 GB

 

[Thedoctor44]

You appear to have some memory corruption. Can you please run memtest86 by following these instructions.

http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html

Can you also run a stress test on your CPU by running Prime95, follow these instructions.

www.sevenforums.com/tutorials/100352-hardware-stress-test-prime95.html

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {fffff800432021e0, 2, 0, fffff80003165900}

[COLOR="Red"]Probably caused by : memory_corruption[/COLOR]

Followup: memory_corruption

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

[COLOR="red"]CLOCK_WATCHDOG_TIMEOUT (101)[/COLOR]
An expected clock interrupt was not received on a secondary processor in an
MP system within the allocated interval. This indicates that the specified
processor is hung and not processing interrupts.
Arguments:
Arg1: 0000000000000021, Clock interrupt time out interval in nominal clock ticks.
Arg2: 0000000000000000, 0.
Arg3: fffff880009b3180, The PRCB address of the hung processor.
Arg4: 0000000000000004, 0.

 

[mariusdaw]

RAM - Test with Memtest86+
Hardware - Stress Test With Prime95
HD TUNE

I tested all.....NO ERRORS...

In generaly i have blue screen's when play games (metin2).Is possible to be video card deffect?



EDIT: i run now prime95 and he give this:

sorry, but i don't know read very good errors in prime95

 

[Thedoctor44]

Hmm, an error in Prime95, I'll ask someone about this.

 

[mariusdaw]

Thanks for trying to help me.

Last night I run memtest86 and look what it says:

Please tell me if any component is damaged because they are under warranty. I've been with them once the warranty and said they were ok.

I mention that I did not overclock

 

[Golden]

That indicates RAM errors. Test each invidual RAM stick one at a time by running 8 passes of MemTest86+. Any that show errors must be replaced.

 

[mariusdaw]

That indicates RAM errors. Test each invidual RAM stick one at a time by running 8 passes of MemTest86+. Any that show errors must be replaced.

I have only one RAM stick (1x 4gb)

 

[Thedoctor44]

Swap that RAM stick into the other DIMM slot then run memtest86 again. If it fails then you will need to replace your RAM. If it doesn't then you have a faulty DIMM slot.