Solved Many different BSOD codes. crashes happen over and over again.

[Welcor]

Hi,

Since yesterday evening, I've had a lot of crashes - apparently with no common theme. I don't recall installing anything new to start it off...

This afternoon I altered the settings so I actually get minidumps, and already I have 5 or 6 of them. See the attached zipfile.

I've gotten, as far as I can remember right now, codes 27, f4, 1e - but also, before I knew those were important, messages like "inpage_error" and "RDR_exception (i think).

I'll go out and buy myself some more RAM anyway.

Can you help?

 

[HarriePateman]

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

[COLOR="Red"]BugCheck 50[/COLOR], {fffffa7fffffffea, 0, fffff800036c806b, 7}


Could not read faulting driver name
Probably caused by : [COLOR="red"]memory_corruption [/COLOR]( nt!MiMapPageInHyperSpaceWorker+1b )

Followup: MachineOwner
---------

Most 0x50 bugchecks are memory related. I would test your RAM thoroughly as follow:

Run a minimum of 8 passes, preferably overnight, or until errors occur using MemTest86+.

Reference this tutorial to help you use MemTest86+:
http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html

 

[Welcor]

Thanks for the reply. I switched to a new set of RAM-sticks (and upgraded a bit in the process). No trouble since.

 

[HarriePateman]

No problems glad i could help. -