Matt Lost monitor signal while tower is still on

[pulto]

Hi there, Matt lost monitor signal while tower is still on. IP address of the tower can't be detected. Checked windows logs says Kernel power 41 error. Any help would be appreciated. Thank you.

 

[Golden]

*** WARNING: Unable to verify timestamp for nscm.sys
*** ERROR: Module load completed but symbols could not be loaded for nscm.sys
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000007E, {ffffffffc0000005, 0, fffff88004059738, fffff88004058f90}

Probably caused by : nscm.sys ( nscm+37f2 )

Followup: MachineOwner
---------

Looks like an issue with Novell. You will need to contact them to resolve the issue.

See:
Support | Random blue screen caused by NSCM.SYS

 

[pulto]

thank you Golden, appreciate the help. I've a user with this similar issue and the problem got solved by replace the video card. So this time what I have done is replace the video card and of course install the video card driver. I'll follow up with novel and let you know how it goes.