- Local time
- 6:52 AM
- Messages
- 43
Using a Sagent SBT TVFM card connected to a Dish Network Dual Receiver as a 2nd TV connection of Antenna, channel 21. Receiver is an HDTV for 1st TV only, so taken from 2nd TV connection, not HDTV. Under XP, using Sagent's software, set to Antenna, channel 21, receive TV fine. However, under Windows 7 Media Center, set to same, receive a "No Signal" Error.
However, if changing channel either one up or one down and back to 21, TV display comes on for about 10 seconds after which it goes back to no signal.
Have updated the driver for this card to the latest Windows 7 driver, using Driver Agent. Any suggestions?
However, if changing channel either one up or one down and back to 21, TV display comes on for about 10 seconds after which it goes back to no signal.
Have updated the driver for this card to the latest Windows 7 driver, using Driver Agent. Any suggestions?
My Computer
At a glance
XP Home 32bit, XP Home(2) 32bit, Ubuntu Meerk...Intel Pentium 4, 2.8ghz, 478 SocketKingston DDR400 (2 GB)Gforce 6200, AGP, 512mb DDR2
- Computer Manufacturer/Model Number
- Self Built
- OS
- XP Home 32bit, XP Home(2) 32bit, Ubuntu Meerkat 32bit
- CPU
- Intel Pentium 4, 2.8ghz, 478 Socket
- Motherboard
- Asus, P4P800SE
- Memory
- Kingston DDR400 (2 GB)
- Graphics Card(s)
- Gforce 6200, AGP, 512mb DDR2
- Sound Card
- SoundMax Integrated on MB
- Monitor(s) Displays
- NEC MultiSync 1940CX
- Screen Resolution
- 1024x768
- Hard Drives
- Master (1) - Western Digital 500GB
Slave (2) - Western Digital 120GB
