- Local time
- 3:38 AM
- Messages
- 43
I have an Asus P4P800 SE MB, where I had 4 x 512KB installed. On POST RAM Check it showed the proper total of 2048GB. I just replaced the 4 available banks of 512KB to 1GB each which should now total 4GB. However on the POST RAM check, it only runs to a total of 2,876GB instead of the 4GB.
I ran the Windows 7 Memory Tool on the Dual Boot screen, running 2 passes with no errors. On my Belarc and CPU-Z applications, it shows the 4 banks of 1GB each, however again the total memory on these is only 2876GB.
The MB manual states that with full 4GB of ram loaded I will only get 3.5GB of ram, however not only 2.876GB.
I am running Windows 7 Home Premium 32-bit, with AMI BIOS, just upgraded to it's latest version 1011. Can anyone advise what might be wrong, or any setting I have missed that would open up the balance of total RAM?
I ran the Windows 7 Memory Tool on the Dual Boot screen, running 2 passes with no errors. On my Belarc and CPU-Z applications, it shows the 4 banks of 1GB each, however again the total memory on these is only 2876GB.
The MB manual states that with full 4GB of ram loaded I will only get 3.5GB of ram, however not only 2.876GB.
I am running Windows 7 Home Premium 32-bit, with AMI BIOS, just upgraded to it's latest version 1011. Can anyone advise what might be wrong, or any setting I have missed that would open up the balance of total RAM?
My Computer
At a glance
XP Home 32bit, XP Home(2) 32bit, Ubuntu Meerk...Intel Pentium 4, 2.8ghz, 478 SocketKingston DDR400 (2 GB)Gforce 6200, AGP, 512mb DDR2
- Computer Manufacturer/Model Number
- Self Built
- OS
- XP Home 32bit, XP Home(2) 32bit, Ubuntu Meerkat 32bit
- CPU
- Intel Pentium 4, 2.8ghz, 478 Socket
- Motherboard
- Asus, P4P800SE
- Memory
- Kingston DDR400 (2 GB)
- Graphics Card(s)
- Gforce 6200, AGP, 512mb DDR2
- Sound Card
- SoundMax Integrated on MB
- Monitor(s) Displays
- NEC MultiSync 1940CX
- Screen Resolution
- 1024x768
- Hard Drives
- Master (1) - Western Digital 500GB
Slave (2) - Western Digital 120GB