Atm I have 500GB array from two 250GB in raid0 with Vista on it... its using up about 90GB of space (leaving around 375GB free) and I want to shrink the partition to say 100GB (see below). Then I want to reformat the unallocated space (~350GB) to be used by my Windows 7 install on my SSD. I know you can use the Disk Management in device manager to do all this but I want the 350GB free space partition to be at the front of the disk (the fastest) and have the old 100GB Vista partition right at the end (in the slowest part I guess, which its ok cos I will rarely boot into it). Is this possible?
About above... just wondering when I shrink the partition to 100GB even though it is only using 90GB is 10GB a good enough buffer for windows to not spaz out? Or is it even too much can I get away with just 2-3GB buffer... I wont be installing or writing anything new to it. It will be mainly just for reading data and booting.
About above... just wondering when I shrink the partition to 100GB even though it is only using 90GB is 10GB a good enough buffer for windows to not spaz out? Or is it even too much can I get away with just 2-3GB buffer... I wont be installing or writing anything new to it. It will be mainly just for reading data and booting.
My Computer
At a glance
Windows 7 64bit and Vista 64bitIntel Core 2 Duo4GB DDR2 800ATI HD 3850
- OS
- Windows 7 64bit and Vista 64bit
- CPU
- Intel Core 2 Duo
- Motherboard
- Abit IP35 DARK RAIDER
- Memory
- 4GB DDR2 800
- Graphics Card(s)
- ATI HD 3850
- Screen Resolution
- 1680x1050
- Hard Drives
- 2x 250GB Western Digital in RAID0 booting with VISTA 64 (for about 3 years).
1x 60GB NEW Corsair SSD with Windows 7 (64) on it.
1x 640GB Western Digital Storage drive (currently unplugged).
- PSU
- 450W Corsair VX
- Case
- CM690
- Cooling
- Zalman