No Login Screen

[Converseallstar95]

Ok so I was on Windows 7 7231 x86
So I upgraded to Windows 7 7264 x86
And when It was done I turnd it on and there was no login screen
Just a black screen and my mouse

Im think that If I wait for the next build I can upgrade to that and it will be all good what do u guys think

And please I need help.

PS
I dual booted it with XP so I can go on the XP Admin account and get all my stuff back so thats not a problem.

 

[woolswell]

Please go to the Safe Mode, and re-install the graphic driver.

I believe you will enjoy the W 7 again.

 

[Converseallstar95]

How do I do that

 

[zigzag3143]

safe mode

How do I do that

first in xp download the driver for your graphics card, save it either on cd or someplace where you can get to it. then reboot while its re-booting hit F8 and it should put you in safe mode (which doesn't use the display driver) and when its finisihed rebooting install the display driver and that hsould be it.

Let us know if that doesn't work

Hope this helped

Ken

 

[Brink]

Hello Converseallstar,

This tutorial below can help show you how to boot into safe mode. Once in it, see if reinstalling your graphics driver may help. If not, then see if a repair install may.

Safe Mode - Vista Forums

Hope this helps,
Shawn

 

[Chappy]

Not sure if it's your graphics driver that's causing this, but something didn't work properly during the upgrade process. Upgrades have been disabled in the RC - RTM branch, and you must have modded the cversion file to get it to work, but I always say that MS has disabled the upgrade process for a reason, and it's not really a wise thing to work around that.

It could be any number of things that's stopping the installation from completing properly, since you say this is first boot after the upgrade. But usually it means that the installation failed in some manner, you may not even be able to access safe mode if the install is corrupt. I would run a Repair install first and if that still fails, do a clean install, not an Upgrade.

 

[Converseallstar95]

first in xp download the driver for your graphics card, save it either on cd or someplace where you can get to it. then reboot while its re-booting hit F8 and it should put you in safe mode (which doesn't use the display driver) and when its finisihed rebooting install the display driver and that hsould be it.

Let us know if that doesn't work

Hope this helped

Ken

How do I download the driver?
But how do I install it on 7?

Hello Converseallstar,

This tutorial below can help show you how to boot into safe mode. Once in it, see if reinstalling your graphics driver may help. If not, then see if a repair install may.

Safe Mode - Vista Forums

Hope this helps,
Shawn

I know how to boot into Safe mode
I dont know how to reinstall my graphics driver
And for that repair I wanted to try that but Im on the latest version so how do I upgrade

Not sure if it's your graphics driver that's causing this, but something didn't work properly during the upgrade process. Upgrades have been disabled in the RC - RTM branch, and you must have modded the cversion file to get it to work, but I always say that MS has disabled the upgrade process for a reason, and it's not really a wise thing to work around that.

It could be any number of things that's stopping the installation from completing properly, since you say this is first boot after the upgrade. But usually it means that the installation failed in some manner, you may not even be able to access safe mode if the install is corrupt. I would run a Repair install first and if that still fails, do a clean install, not an Upgrade.

How do I do a repair install

And the only thing I did was Run it in Compatibilty for Vista SP2
A thread here said thats the only way to get it to upgrade to an RTM

 

[Brink]

Converseallstar,

To do a repair install, use your Windows 7 7264 x86 installation disk to do the instructions at the link below. If it still will not work for you, then you will need to do a clean install instead of a upgrade.

http://www.sevenforums.com/tutorials/3413-repair-install.html

Hope this helps,
Shawn

 

[Converseallstar95]

Hey thanks Ill try that in an hour
Upped all ur reps

 

[Converseallstar95]

Ok guys sorry for not telling you what happened

But the repair install didnt work it kept trying to load the installer from the H drive and thats my backup drive

So I just did a clean install

 

[Brink]

I'm happy to hear that you got it sorted now, but sorry it took a clean install to do it.

 

[Converseallstar95]

No its cool it needed a clean install ive been upgrading it since the RC

But anyways
(I think Im allowed to ask this here)
Is the new 7600 build like a final build or something?

 

[zigzag3143]

no logonscreen solved

No its cool it needed a clean install ive been upgrading it since the RC

But anyways
(I think Im allowed to ask this here)
Is the new 7600 build like a final build or something?

7600 is going to be the RTM (released to manufacturing) probably. It will be the last frantic upgrade for 30-60 days and should be a stabile reliable build. there will still be a few more fixes before it comes out but that should be just abt it.

Hope this helps

Ken