No power to USB after failed hardware install

[Bandit012345]

Hello all.
I am desperate for help!
I have a Toshiba A300 laptop running Windows 7 Ult x64
I attempted to install a Logitech camera & webcam, Windows failed to install the drivers.
After that, I lost all power to my left and right USBs.
I tried System Restore, changing the Power Settings (keeping USBs on) but nothing worked.
After running a third-party USB disabler/enabler, I was able to enable the left USB port, but still have no power to both right ports.
I am at a loss of how to diagnose and fix this issue.
I am 99% sure that this is not a hardware issue, but rather a Windows 7 safeguard against the botched driver install for the Logitech installation.
I don't know enough about advanced tweaking to diagnose this issue.
If anyone could help, it would be my Christmas miracle!

 

[Layback Bear]

Your computer is quite old and cam with Vista Business and DDR II ram the best I can tell.

If this is not correct please give me more information that I can work with.

From where and how did you get Windows 7 Ultimate/64 and is it activated with SP-1 installed?

 

[Bandit012345]

Yes this laptop is older.
It came with Vista and XP Roll Back.
I upgraded the ram when I bought Windows 7 from my school.
Yes it is activated with SP1 and is current with all MS Updates.

 

[Layback Bear]

This is going to be a tough one.
If it was my computer I would remove all Logitech drivers just installed for your camera and webcam.

I would also remove what ever this is. ( third-party USB disabler/enabler).
Try to get the computer back to the way it was before all this mess started.
Then check if the usb ports work as they should. Their is a chance your older motherboard is not able to handle what is need for your camera and webcam to work properly.

Then check if what ever camera and webcam you are using is compatible with Windows 7/64.

I will go back to the ranch and see if I can find someone with knowledge with old laptops and cameras.

Could you let us know what kind of camera/webcam you are trying to get to work.

 

[Bandit012345]

Thanks for the quick reply "Layback Bear".
I have sad news for myself because I believe that I just confirmed the worst scenario.
It appears as though I was wrong about the 99% being a software issue, and it looks more likely that I fell into that horrid 1% hardware failure.
I just booted the laptop from a USB I created running Puppy Linux, and I was unable to locate any of the right-side USB ports.
Apparently the camera (a Logitech ClickSmart 310) which appears to be defective may have blown out the USB controller related to the right-side ports.
Since Puppy Linux is completely independent from Windows, I can only assume that this new discovery is accurate - unfortunately!

 

[Layback Bear]

I think you are correct.
Hang in their and let some other members read your thread. They might have some suggestions.

Any thing plugged into a powered usb port that has a short can cause the problem you described.

 

[Bandit012345]

I just installed a neat piece of diagnostic software called "usbdeview-x64" from NirSoft.
I have now confirmed that the USB devices are reading Port 1: 500 mA, Ports 2 and 3: 0 mA.
Looks pretty clear that I will be hunting for a Toshiba repair shop.
...just hope it doesn't cost more than replacing the laptop!
Thanks again "Layback Bear" for your help.

I just wish this laptop had a surge protector built into it!

 

[essenbe]

If your problem is hardware, there is little we can do here, but before I paid money for a fix, I would make sure that it is not a driver problem. I find it difficult to believe that a Logitech program could damage a USB port. I have a couple of suggestions. First, click start and then type Device manager in the search box. then post a screenshot of Device manager with USB ports expanded. It will probably take 2 or 3 screenshots, but that's OK. Here is how to post screenshots, http://www.sevenforums.com/tutorials/9733-screenshots-files-upload-post-seven-forums.html. It is pretty easy. Lets see what it shows.

Then you can run through this and see if anything helps http://www.sevenforums.com/tutorials/165554-usb-driver-general-fix-problems.html

I would imagine it is in the tutorial, but find the port you are having problems with in Device Manager, right click it and select uninstall. Once it is uninstalled, reboot the computer, that will force Windows to reinstall it, because it will 'detect new hardware'.

When you installed Windows 7 did you find Chipset drivers for Windows 7? That is another option to reinstall the chipset drivers. That is where the USB drivers usually come from. But work through the tutorial first and see if it helps any.

 

[Bandit012345]

Hi "essenbe"
Thanks for the heads up! I read through the material you provided - very informative!!!!!
Unfortunately because I also booted from an independent OS (Puppy Linux) from a USB key (on the left port)
it pretty much confirmed that the right ports are dead.
I would love to be wrong on this, but evidence appears to be hardware.
...and there's no software that can fix that.

P.S. I bookmarked your url link. Thanks again!

 

[Layback Bear]

I'm not sure a driver can cause a (0) ma so I'm going to be watching and hopefully I can learn something.

I would recommend trying essenbe suggestions. Who knows we all might learn something. essenbe is one of the sharper knives in the kitchen. If it was my computer I would try his suggestions.

Taking a old laptop to a shop for that kink of repair will normally cost more than a new laptop.

 

[essenbe]

What I was suggesting is to make sure you do not have a driver problem that can be fixed before spending money on it. It won't cost anything to try it. If it is not working because it is disabled for some reason, it won't show up at all in any vase. I would work through that tutorial first, and if that didn't work, reinstall the chipset drivers.

 

[essenbe]

Jack, if the port is disabled or uninstalled for whatever reason, as far as the computer is concerned, it isn't there. If we can get the computer to recognize it and install it, we may make some headway. But you are right, what a shop would charge would be as much as the laptop is worth. I suspect a shop is going to say it needs a new Motherboard.

 

[Bandit012345]

Just to clarify; I don't think the driver caused this.
I think the driver failed to install because the Logitech camera itself was defective and was responsible for both the Logitech driver not installing, and the USB ports to surge.
If you read my original post, the USB port issue happened when I plugged in the Logitech camera into the USB port and Windows tried to install the PnP driver.
Unfortunately I had no way of anticipating this would occur, until I plugged it in to the USB port.

The camera doesn't even power on now, even with batteries or by a USB wall plug.
Like I said, there was no way to know!

Nevertheless, when I wake up from some sleep I will go through all the steps you suggested.

Cheers and thanks!!!

 

[Layback Bear]

Bandit012345 please don't misunderstand.

We are not saying you are wrong.
I personally think you are right. It cost nothing to try to fix the damage to the laptop that the bad camera caused.

Of course it's your laptop so you will have to choose.
We are happy with what ever you choose to do.
Please just keep us up to date.

 

[Bandit012345]

I don't think I've misunderstood all your help at all - I think you guys are great and I appreciate your help tremendously.
Knowledge is obtained by the shared experiences of others.
I will most definitely give this my full attention first chance I get - and I will be posting back with updates!

Thanks so much for your fantastic help "Layback Bear" and "essenbe" !!!!!!

 

[essenbe]

No problem with the help. That's what we do here, and I love a challenge. I just hope it works out well for you. if you need more help, just let us know.